Sonny a écrit :
Hello
This is a repost, there seems to have a misunderstanding before.
I hope this is the right place to ask this. Does any know if there is a
substantial difference in the performance of the traffic controller
between kernel 2.4 and 2.6. We tested it using 1 iperf server and use
250 and 500 clients, altering the burst.
This is the set-up:
iperf client - router (w/ traffic controller) - iperf server
We use the top command inside the router to check the idle time of our
router to see this. The results we got from the 2.4 kernel shows
around 65-70% idle time while the 2.6 shows
60-65% idle time. We tried to use MRTG and we're not getting any
results either. We want to know if we could improve the bandwidth by
upgrading the kernel, else we would have to get a new bandwidth
manager. Have anyone performed a similar test or can suggest a better
way to do this. Thanks in advance.
-
Hi Sonny
I am not sure what you are asking here. 65-70% idle time (or 60-65%) is fine.
2.6 is also not very meaningfull, there are a lot of changes between 2.6.0 and
2.6.23 :)
Why should you upgrade kernel ?
What bandwidth do you handle ?
What kind of platform is it ? (a new kernel wont help much if its a real old
machine, or old NICs)
You seem to have some bandwidth problem but focus on cpu affairs...
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
