On Wed, Oct 03, 2007 at 02:23:58PM -0700, Larry McVoy wrote: > > A few notes to the discussion. I've seen one e1000 "bug" that ended up being > > a crappy AMD pre-opteron SMP chipset with a totally useless PCI bus > > implementation, which limited performance quite a bit-totally depending on > > what you plugged in and in which slot. 10e milk-and-bread-store > > 32/33 gige nics actually were better than server-class e1000's > > in those, but weren't that great either. > > That could well be my problem, this is a dual processor (not core) athlon > (not opteron) tyan motherboard if I recall correctly. If it's AMD760/768MPX, here's some relevant discussion:
http://lkml.org/lkml/2002/7/18/292 http://www.ussg.iu.edu/hypermail/linux/kernel/0307.1/1109.html http://www.ussg.iu.edu/hypermail/linux/kernel/0307.1/1154.html http://www.ussg.iu.edu/hypermail/linux/kernel/0307.1/1212.html http://forums.2cpu.com/showthread.php?s=&threadid=31211 > > > Check your interrupt rates for the interface. You shouldn't be getting > > anywhere near 1 interrupt/packet. If you are, something is badly wrong :). > > The acks (because I'm sending) are about 1.5 packets/interrupt. > When this box is receiving it's moving about 3x ass much data > and has a _lower_ (absolute, not per packet) interrupt load. Probably not a problem then, since those acks probably cover many sent packets. Current interrupt mitigation schemes are pretty dynamic, balancing between latency and bulk performance so the acks might be fine (thousands vs. tens of thousands/sec) -- Pekka Pietikainen - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
