The srom array in the board data is only being used in the device probe
routines. The probe also only uses the first 6 bytes of an array
we spend 512ms reading 128 bytes from. Change to reading the
MAC area directly to the MAC address structure.
As a side product, we rename the read_srom_word to dm9000_read_eeprom
to bring it into line with the rest of the driver. No change is made
to the delay in this function, which will be dealt with in a later
patch.
Signed-off-by: Ben Dooks <[EMAIL PROTECTED]>
Index: linux-2.6.23-quilt5/drivers/net/dm9000.c
===================================================================
--- linux-2.6.23-quilt5.orig/drivers/net/dm9000.c
+++ linux-2.6.23-quilt5/drivers/net/dm9000.c
@@ -134,7 +134,6 @@ typedef struct board_info {
struct task_struct *thread;
struct net_device_stats stats;
- unsigned char srom[128];
spinlock_t lock;
struct mii_if_info mii;
@@ -171,7 +170,8 @@ static irqreturn_t dm9000_interrupt(int,
static int dm9000_phy_read(struct net_device *dev, int phyaddr_unsused, int
reg);
static void dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int
reg,
int value);
-static u16 read_srom_word(board_info_t *, int);
+
+static void dm9000_read_eeprom(board_info_t *, int addr, unsigned char *to);
static void dm9000_rx(struct net_device *);
static void dm9000_hash_table(struct net_device *);
@@ -638,13 +638,9 @@ dm9000_probe(struct platform_device *pde
db->mii.mdio_read = dm9000_phy_read;
db->mii.mdio_write = dm9000_phy_write;
- /* Read SROM content */
- for (i = 0; i < 64; i++)
- ((u16 *) db->srom)[i] = read_srom_word(db, i);
-
- /* Set Node Address */
- for (i = 0; i < 6; i++)
- ndev->dev_addr[i] = db->srom[i];
+ /* try reading the node address from the attached EEPROM */
+ for (i = 0; i < 6; i += 2)
+ dm9000_read_eeprom(db, i / 2, ndev->dev_addr+i);
if (!is_valid_ether_addr(ndev->dev_addr)) {
/* try reading from mac */
@@ -1064,17 +1060,19 @@ dm9000_rx(struct net_device *dev)
}
/*
- * Read a word data from SROM
+ * Read a word data from EEPROM
*/
-static u16
-read_srom_word(board_info_t * db, int offset)
+static void
+dm9000_read_eeprom(board_info_t * db, int offset, unsigned char *to)
{
iow(db, DM9000_EPAR, offset);
iow(db, DM9000_EPCR, EPCR_ERPRR);
mdelay(8); /* according to the datasheet 200us should be
enough,
but it doesn't work */
iow(db, DM9000_EPCR, 0x0);
- return (ior(db, DM9000_EPDRL) + (ior(db, DM9000_EPDRH) << 8));
+
+ to[0] = ior(db, DM9000_EPDRL);
+ to[1] = ior(db, DM9000_EPDRH);
}
#ifdef DM9000_PROGRAM_EEPROM
--
Ben ([EMAIL PROTECTED], http://www.fluff.org/)
'a smiley only costs 4 bytes'
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
