Use the flags in the IRQ resource to specify the type of
IRQ being requested, so that systems which do not have
level-based interrupts, or change the interrupt in some
other way can specify this without making an #ifdef mess
in the driver.
This is specifically designed to undo the change in commit
4e4fc05a2b6e7bd2e0facd96e0c18dceb34d9349 which hardwires the
type for everyone but blackfin to IRQT_RISING, which breaks
all a number of Simtec boards which use (and setup in the
bootloader) active low IRQs.
Note, although there where originally objections due to
the use of IORESOURCE_IRQ and IRQT_ flags not sharing the
same definition, at least <include/linux/interrupt.h> notes
these are the same.
Signed-off-by: Ben Dooks <[EMAIL PROTECTED]>
CC: Daniel Mack <[EMAIL PROTECTED]>
CC: Bryan Wu <[EMAIL PROTECTED]>
CC: Alex Landau <[EMAIL PROTECTED]>
Index: linux-2.6.24-quilt2/drivers/net/dm9000.c
===================================================================
--- linux-2.6.24-quilt2.orig/drivers/net/dm9000.c
+++ linux-2.6.24-quilt2/drivers/net/dm9000.c
@@ -90,9 +90,9 @@
#define writesb outsb
#define writesw outsw
#define writesl outsl
-#define DM9000_IRQ_FLAGS (IRQF_SHARED | IRQF_TRIGGER_HIGH)
+#define DEFAULT_TRIGGER IRQF_TRIGGER_HIGH
#else
-#define DM9000_IRQ_FLAGS (IRQF_SHARED | IRQT_RISING)
+#define DEFAULT_TRIGGER (0)
#endif
/*
@@ -614,10 +614,21 @@ static int
dm9000_open(struct net_device *dev)
{
board_info_t *db = (board_info_t *) dev->priv;
+ unsigned long irqflags = db->irq_res->flags & IRQF_TRIGGER_MASK;
dev_dbg(db->dev, "entering %s\n", __func__);
- if (request_irq(dev->irq, &dm9000_interrupt, DM9000_IRQ_FLAGS,
dev->name, dev))
+ /* If there is no IRQ type specified, default to something that
+ * may work, and tell the user that this is a problem */
+
+ if (irqflags == IRQF_TRIGGER_NONE) {
+ dev_warn(db->dev, "WARNING: no IRQ resource flags set.\n");
+ irqflags = DEFAULT_TRIGGER;
+ }
+
+ irqflags |= IRQF_SHARED;
+
+ if (request_irq(dev->irq, &dm9000_interrupt, irqflags, dev->name, dev))
return -EAGAIN;
/* Initialize DM9000 board */
--
Ben ([EMAIL PROTECTED], http://www.fluff.org/)
'a smiley only costs 4 bytes'
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
