Bug in the driver initialization causes soft-lockup if firmware
initialization timeout is reached. Polling function bfa_ioc_poll_fwinit()
incorrectly calls bfa_nw_iocpf_timeout() when the timeout is reached.
The problem is that bfa_nw_iocpf_timeout() calls again
bfa_ioc_poll_fwinit()... etc. The bfa_ioc_poll_fwinit() should directly
send timeout event for iocpf and the same should be done if firmware
download into HW fails.
Cc: Rasesh Mody <rasesh.m...@qlogic.com>
Signed-off-by: Ivan Vecera <ivec...@redhat.com>
---
drivers/net/ethernet/brocade/bna/bfa_ioc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.c
b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
index 594a2ab..68f3c13 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_ioc.c
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
@@ -2414,7 +2414,7 @@ bfa_ioc_boot(struct bfa_ioc *ioc, enum bfi_fwboot_type
boot_type,
if (status == BFA_STATUS_OK)
bfa_ioc_lpu_start(ioc);
else
- bfa_nw_iocpf_timeout(ioc);
+ bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_TIMEOUT);
return status;
}
@@ -3029,7 +3029,7 @@ bfa_ioc_poll_fwinit(struct bfa_ioc *ioc)
}
if (ioc->iocpf.poll_time >= BFA_IOC_TOV) {
- bfa_nw_iocpf_timeout(ioc);
+ bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_TIMEOUT);
} else {
ioc->iocpf.poll_time += BFA_IOC_POLL_TOV;
mod_timer(&ioc->iocpf_timer, jiffies +
--
2.3.6
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
