When programming the start of a periodic output, the code wrongly places
the seconds value into the "low" register and the nanoseconds into the
"high" register. Even though this is backwards, it slipped through my
testing, because the re-arming code in the interrupt service routine is
correct, and the signal does appear starting with the second edge.
This patch fixes the issue by programming the registers correctly.
Signed-off-by: Richard Cochran <richardcoch...@gmail.com>
---
drivers/net/ethernet/intel/igb/igb_ptp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c
b/drivers/net/ethernet/intel/igb/igb_ptp.c
index e3b9b63..c3a9392c 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -538,8 +538,8 @@ static int igb_ptp_feature_enable_i210(struct
ptp_clock_info *ptp,
igb->perout[i].start.tv_nsec = rq->perout.start.nsec;
igb->perout[i].period.tv_sec = ts.tv_sec;
igb->perout[i].period.tv_nsec = ts.tv_nsec;
- wr32(trgttiml, rq->perout.start.sec);
- wr32(trgttimh, rq->perout.start.nsec);
+ wr32(trgttimh, rq->perout.start.sec);
+ wr32(trgttiml, rq->perout.start.nsec);
tsauxc |= tsauxc_mask;
tsim |= tsim_mask;
} else {
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
