From: Corcodel Marian <corcodel.mar...@gmail.com> Date: Mon, 3 Aug 2015 10:28:38 +0300
> Realtek nic its very versatile and have more registers for > optimise and solve different issues. I added 2 parameters rx_buf_sz and > txpacketmax 1.Parameter rx_buf_sz represent Receive Packet Maximum size and > on this program is 16383 bytes, eg RTL 8101E use 16000 and user may use > alls values up to maximum but value great from zero. If a received packet > of packet length larger than the value set here, then it will set both RWT > and RES bits in the corresponding Rx Status Descriptor. If the packet, which > is larger than the RMS value, is received without CRC error, it is still a > good packet, although both RWT and RES bits are set in the corresponding Rx > Status Descriptor. 2. Parameter txpacketmax represent Max Transmit Packet > Size value must be on range 1-63.Do not put zero on any situation.Every > field from range 1-63 have 128 bytes. For regular LAN applications, i.e., > the max packet size is either 1518 or 1522 (VLAN) bytes, this field must be > larger than the max packet size. E.g., 0x0C. On mee working good with > txpacketmax=60 and rx_buf_sz=1600 > > Signed-off-by: Corcodel Marian <corcodel.mar...@gmail.com> Sorry, such module parameters are completely inappropriate. Control the values, at run time, using a standard, generic facility such as ethtool. Please stop sending patches that add new module parameters, they are almost certainly guaranteed to be unacceptable. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
