On Fri, Sep 11, 2015 at 10:41:31AM +0200, Geert Uytterhoeven wrote: > Hi Simon, > > On Fri, Sep 11, 2015 at 10:14 AM, Simon Horman <ho...@verge.net.au> wrote: > >> > @@ -18,6 +21,9 @@ Required properties: > >> > Optional properties: > >> > - interrupt-parent: the phandle for the interrupt controller that > >> > services > >> > interrupts for this device. > >> > +- interrupt-names: One entry per interrupt named "ch%u". > >> > + For the R8A7795 SoC this property is mandatory, > >> > + and "ch0" through "ch24" are mandatory. > >> > >> This suggests the single multiplexed interrupt on R-Car Gen2 can be called > >> "ch0". Is that what you want? I know the driver doesn't care. > > > > No, its not what I intended. > > > > I think its reasonable to allow the multiplexed interrupt to be named, > > but to what I wonder. The documentation seems to call the interrupt > > "EthernetAVB", which isn't very exciting. > > Perhaps "mux", like I did for rspi, cfr. > Documentation/devicetree/bindings/spi/spi-rspi.txt: > > - interrupts : A list of interrupt-specifiers, one for each entry in > interrupt-names. > If interrupt-names is not present, an interrupt > specifier > for a single muxed interrupt. > - interrupt-names : A list of interrupt names. Should contain (if present): > - "error" for SPEI, > - "rx" for SPRI, > - "tx" to SPTI, > - "mux" for a single muxed interrupt.
Thanks for for that example. "mux" sounds good to me. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html