From daf0a1f5100c21f10b9e08829433258267748c44 Mon Sep 17 00:00:00 2001
From: Janusz Wolak <janusz...@gmail.com>
Date: Tue, 6 Oct 2015 21:03:19 +0200
Subject: [PATCH 1/6] Remove checkpatch warnings and checks.
Signed-off-by: Janusz Wolak <janusz...@gmail.com>
---
drivers/net/ethernet/intel/e1000/e1000_main.c | 145
++++++++++++++------------
1 file changed, 76 insertions(+), 69 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c
b/drivers/net/ethernet/intel/e1000/e1000_main.c
index e0c3c14..583a094 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -1,5 +1,5 @@
/*******************************************************************************
-
+*
Intel PRO/1000 Linux driver
Copyright(c) 1999 - 2006 Intel Corporation.
@@ -34,7 +34,7 @@
#include <linux/if_vlan.h>
char e1000_driver_name[] = "e1000";
-static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
+static const char e1000_driver_string[] = "Intel(R) PRO/1000 Network
Driver";
#define DRV_VERSION "7.3.21-k8-NAPI"
const char e1000_driver_version[] = DRV_VERSION;
static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel
Corporation.";
@@ -149,6 +149,7 @@ static void e1000_alloc_dummy_rx_buffers(struct
e1000_adapter *adapter,
int cleaned_count)
{
}
+
static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring,
int cleaned_count);
@@ -185,14 +186,14 @@ static void e1000_shutdown(struct pci_dev *pdev);
#ifdef CONFIG_NET_POLL_CONTROLLER
/* for netdump / net console */
-static void e1000_netpoll (struct net_device *netdev);
+static void e1000_netpoll(struct net_device *netdev);
#endif
#define COPYBREAK_DEFAULT 256
static unsigned int copybreak __read_mostly = COPYBREAK_DEFAULT;
module_param(copybreak, uint, 0644);
MODULE_PARM_DESC(copybreak,
- "Maximum size of packet that is copied to a new buffer on receive");
+ "Maximum size of packet that is copied to a new buffer on
receive");
static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
pci_channel_state_t state);
@@ -224,7 +225,7 @@ MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
-#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
+#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE |
NETIF_MSG_LINK)
static int debug = -1;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
@@ -237,6 +238,7 @@ MODULE_PARM_DESC(debug, "Debug level
(0=none,...,16=all)");
struct net_device *e1000_get_hw_dev(struct e1000_hw *hw)
{
struct e1000_adapter *adapter = hw->back;
+
return adapter->netdev;
}
@@ -249,6 +251,7 @@ struct net_device *e1000_get_hw_dev(struct e1000_hw *hw)
static int __init e1000_init_module(void)
{
int ret;
+
pr_info("%s - version %s\n", e1000_driver_string, e1000_driver_version);
pr_info("%s\n", e1000_copyright);
@@ -258,8 +261,7 @@ static int __init e1000_init_module(void)
if (copybreak == 0)
pr_info("copybreak disabled\n");
else
- pr_info("copybreak enabled for "
- "packets <= %u bytes\n", copybreak);
+ pr_info("copybreak enabled for packets <= %u bytes\n",
copybreak);
}
return ret;
}
@@ -288,9 +290,8 @@ static int e1000_request_irq(struct e1000_adapter
*adapter)
err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
netdev);
- if (err) {
+ if (err)
e_err(probe, "Unable to allocate interrupt Error: %d\n", err);
- }
return err;
}
@@ -406,6 +407,7 @@ static void e1000_configure(struct e1000_adapter
*adapter)
*/
for (i = 0; i < adapter->num_rx_queues; i++) {
struct e1000_rx_ring *ring = &adapter->rx_ring[i];
+
adapter->alloc_rx_buf(adapter, ring,
E1000_DESC_UNUSED(ring));
}
@@ -466,7 +468,7 @@ static void e1000_power_down_phy(struct
e1000_adapter *adapter)
* (c) SoL/IDER session is active
*/
if (!adapter->wol && hw->mac_type >= e1000_82540 &&
- hw->media_type == e1000_media_type_copper) {
+ hw->media_type == e1000_media_type_copper) {
u16 mii_reg = 0;
switch (hw->mac_type) {
@@ -501,8 +503,7 @@ static void e1000_down_and_stop(struct e1000_adapter
*adapter)
cancel_delayed_work_sync(&adapter->watchdog_task);
- /*
- * Since the watchdog task can reschedule other tasks, we should cancel
+ /* Since the watchdog task can reschedule other tasks, we should cancel
* it first, otherwise we can run into the situation when a work is
* still running after the adapter has been turned down.
*/
@@ -806,7 +807,7 @@ static int e1000_is_need_ioport(struct pci_dev *pdev)
}
static netdev_features_t e1000_fix_features(struct net_device *netdev,
- netdev_features_t features)
+ netdev_features_t features)
{
/* Since there is no support for separate Rx/Tx vlan accel
* enable/disable make sure Tx flag is always in same state as Rx.
@@ -820,7 +821,7 @@ static netdev_features_t e1000_fix_features(struct
net_device *netdev,
}
static int e1000_set_features(struct net_device *netdev,
- netdev_features_t features)
+ netdev_features_t features)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
netdev_features_t changed = features ^ netdev->features;
@@ -1061,7 +1062,7 @@ static int e1000_probe(struct pci_dev *pdev, const
struct pci_device_id *ent)
}
if ((hw->mac_type >= e1000_82544) &&
- (hw->mac_type != e1000_82547))
+ (hw->mac_type != e1000_82547))
netdev->hw_features |= NETIF_F_TSO;
netdev->priv_flags |= IFF_SUPP_NOFCS;
@@ -1122,7 +1123,6 @@ static int e1000_probe(struct pci_dev *pdev, const
struct pci_device_id *ent)
if (!is_valid_ether_addr(netdev->dev_addr))
e_err(probe, "Invalid MAC Address\n");
-
INIT_DELAYED_WORK(&adapter->watchdog_task, e1000_watchdog);
INIT_DELAYED_WORK(&adapter->fifo_stall_task,
e1000_82547_tx_fifo_stall_task);
@@ -1143,20 +1143,20 @@ static int e1000_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
break;
case e1000_82544:
e1000_read_eeprom(hw,
- EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
- eeprom_apme_mask = E1000_EEPROM_82544_APM;
+ EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
+ eeprom_apme_mask = E1000_EEPROM_82544_APM;
break;
case e1000_82546:
case e1000_82546_rev_3:
if (er32(STATUS) & E1000_STATUS_FUNC_1) {
e1000_read_eeprom(hw,
- EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
+ EEPROM_INIT_CONTROL3_PORT_B, 1,
&eeprom_data);
break;
}
/* Fall Through */
default:
e1000_read_eeprom(hw,
- EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
+ EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
break;
}
if (eeprom_data & eeprom_apme_mask)
@@ -1527,6 +1527,7 @@ setup_tx_desc_die:
if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
void *olddesc = txdr->desc;
dma_addr_t olddma = txdr->dma;
+
e_err(tx_err, "txdr align check failed: %u bytes at %p\n",
txdr->size, txdr->desc);
/* Try again, without freeing the previous */
@@ -1565,7 +1566,7 @@ setup_tx_desc_die:
/**
* e1000_setup_all_tx_resources - wrapper to allocate Tx resources
- * (Descriptors) for all queues
+ * (Descriptors) for all queues
* @adapter: board private structure
*
* Return 0 on success, negative on failure
@@ -1679,7 +1680,6 @@ static void e1000_configure_tx(struct
e1000_adapter *adapter)
adapter->pcix_82544 = true;
ew32(TCTL, tctl);
-
}
/**
@@ -1719,6 +1719,7 @@ setup_rx_desc_die:
if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
void *olddesc = rxdr->desc;
dma_addr_t olddma = rxdr->dma;
+
e_err(rx_err, "rxdr align check failed: %u bytes at %p\n",
rxdr->size, rxdr->desc);
/* Try again, without freeing the previous */
@@ -1757,7 +1758,7 @@ setup_rx_desc_die:
/**
* e1000_setup_all_rx_resources - wrapper to allocate Rx resources
- * (Descriptors) for all queues
+ * (Descriptors) for all queues
* @adapter: board private structure
*
* Return 0 on success, negative on failure
@@ -2187,6 +2188,7 @@ static void e1000_leave_82542_rst(struct
e1000_adapter *adapter)
if (netif_running(netdev)) {
/* No need to loop, because 82542 supports only 1 queue */
struct e1000_rx_ring *ring = &adapter->rx_ring[0];
+
e1000_configure_rx(adapter);
adapter->alloc_rx_buf(adapter, ring, E1000_DESC_UNUSED(ring));
}
@@ -2298,6 +2300,7 @@ static void e1000_set_rx_mode(struct net_device
*netdev)
if (i == rar_entries) {
/* load any remaining addresses into the hash table */
u32 hash_reg, hash_bit, mta;
+
hash_value = e1000_hash_mc_addr(hw, ha->addr);
hash_reg = (hash_value >> 5) & 0x7F;
hash_bit = hash_value & 0x1F;
@@ -2365,8 +2368,8 @@ static void e1000_82547_tx_fifo_stall_task(struct
work_struct *work)
if (atomic_read(&adapter->tx_fifo_stall)) {
if ((er32(TDT) == er32(TDH)) &&
- (er32(TDFT) == er32(TDFH)) &&
- (er32(TDFTS) == er32(TDFHS))) {
+ (er32(TDFT) == er32(TDFH)) &&
+ (er32(TDFTS) == er32(TDFHS))) {
tctl = er32(TCTL);
ew32(TCTL, tctl & ~E1000_TCTL_EN);
ew32(TDFT, adapter->tx_head_addr);
@@ -2450,8 +2453,7 @@ static void e1000_watchdog(struct work_struct *work)
&adapter->link_duplex);
ctrl = er32(CTRL);
- pr_info("%s NIC Link is Up %d Mbps %s, "
- "Flow Control: %s\n",
+ pr_info("%s NIC Link is Up %d Mbps %s, Flow Control:
%s\n",
netdev->name,
adapter->link_speed,
adapter->link_duplex == FULL_DUPLEX ?
@@ -2595,7 +2597,7 @@ static unsigned int e1000_update_itr(struct
e1000_adapter *adapter,
switch (itr_setting) {
case lowest_latency:
/* jumbo frames get bulk treatment*/
- if (bytes/packets > 8000)
+ if (bytes / packets > 8000)
retval = bulk_latency;
else if ((packets < 5) && (bytes > 512))
retval = low_latency;
@@ -2603,13 +2605,13 @@ static unsigned int e1000_update_itr(struct
e1000_adapter *adapter,
case low_latency: /* 50 usec aka 20000 ints/s */
if (bytes > 10000) {
/* jumbo frames need bulk latency setting */
- if (bytes/packets > 8000)
+ if (bytes / packets > 8000)
retval = bulk_latency;
- else if ((packets < 10) || ((bytes/packets) > 1200))
+ else if ((packets < 10) || ((bytes / packets) > 1200))
retval = bulk_latency;
else if ((packets > 35))
retval = lowest_latency;
- } else if (bytes/packets > 2000)
+ } else if (bytes / packets > 2000)
retval = bulk_latency;
else if (packets <= 2 && bytes < 512)
retval = lowest_latency;
@@ -2719,6 +2721,7 @@ static int e1000_tso(struct e1000_adapter *adapter,
mss = skb_shinfo(skb)->gso_size;
if (protocol == htons(ETH_P_IP)) {
struct iphdr *iph = ip_hdr(skb);
+
iph->tot_len = 0;
iph->check = 0;
tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
@@ -2827,7 +2830,7 @@ static bool e1000_tx_csum(struct e1000_adapter
*adapter,
}
#define E1000_MAX_TXD_PWR 12
-#define E1000_MAX_DATA_PER_TXD (1<<E1000_MAX_TXD_PWR)
+#define E1000_MAX_DATA_PER_TXD (1 << E1000_MAX_TXD_PWR)
static int e1000_tx_map(struct e1000_adapter *adapter,
struct e1000_tx_ring *tx_ring,
@@ -2876,8 +2879,8 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
* terminating buffers within evenly-aligned dwords.
*/
if (unlikely(adapter->pcix_82544 &&
- !((unsigned long)(skb->data + offset + size - 1) & 4) &&
- size > 4))
+ !((unsigned long)(skb->data + offset + size - 1) & 4)
&&
+ size > 4))
size -= 4;
buffer_info->length = size;
@@ -2910,6 +2913,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
while (len) {
unsigned long bufend;
+
i++;
if (unlikely(i == tx_ring->count))
i = 0;
@@ -2919,8 +2923,8 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
/* Workaround for premature desc write-backs
* in TSO mode. Append 4-byte sentinel desc
*/
- if (unlikely(mss && f == (nr_frags-1) &&
- size == len && size > 8))
+ if (unlikely(mss && f == (nr_frags - 1) &&
+ size == len && size > 8))
size -= 4;
/* Workaround for potential 82544 hang in PCI-X.
* Avoid terminating buffers within evenly-aligned
@@ -3148,6 +3152,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff
*skb,
*/
if (mss) {
u8 hdr_len;
+
max_per_txd = min(mss << 2, max_per_txd);
max_txd_pwr = fls(max_per_txd) - 1;
@@ -3169,8 +3174,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff
*skb,
/* fall through */
pull_size = min((unsigned int)4, skb->data_len);
if (!__pskb_pull_tail(skb, pull_size)) {
- e_err(drv, "__pskb_pull_tail "
- "failed.\n");
+ e_err(drv, "__pskb_pull_tail
failed.\n");
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
@@ -3201,7 +3205,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff
*skb,
* in PCI-X mode, so add one more descriptor to the count
*/
if (unlikely((hw->bus_type == e1000_bus_type_pcix) &&
- (len > 2015)))
+ (len > 2015)))
count++;
nr_frags = skb_shinfo(skb)->nr_frags;
@@ -3348,8 +3352,7 @@ static void e1000_regdump(struct e1000_adapter
*adapter)
pr_info("%-15s %08x\n", reg_name[i], regs_buff[i]);
}
-/*
- * e1000_dump: Print registers, tx ring and rx ring
+/* e1000_dump: Print registers, tx ring and rx ring
*/
static void e1000_dump(struct e1000_adapter *adapter)
{
@@ -3417,7 +3420,7 @@ static void e1000_dump(struct e1000_adapter *adapter)
type = "";
pr_info("T%c[0x%03X] %016llX %016llX %016llX %04X %3X %016llX %p
%s\n",
- ((le64_to_cpu(u->b) & (1<<20)) ? 'd' : 'c'), i,
+ ((le64_to_cpu(u->b) & (1 << 20)) ? 'd' : 'c'), i,
le64_to_cpu(u->a), le64_to_cpu(u->b),
(u64)buffer_info->dma, buffer_info->length,
buffer_info->next_to_watch,
@@ -3467,20 +3470,20 @@ rx_ring_summary:
for (i = 0x6000; i <= 0x63FF ; i += 0x10) {
pr_info("R%04X: %08X|%08X %08X|%08X\n",
i,
- readl(adapter->hw.hw_addr + i+4),
+ readl(adapter->hw.hw_addr + i + 4),
readl(adapter->hw.hw_addr + i),
- readl(adapter->hw.hw_addr + i+12),
- readl(adapter->hw.hw_addr + i+8));
+ readl(adapter->hw.hw_addr + i + 12),
+ readl(adapter->hw.hw_addr + i + 8));
}
/* tx */
pr_info("Tx descriptor cache in 64bit format\n");
for (i = 0x7000; i <= 0x73FF ; i += 0x10) {
pr_info("T%04X: %08X|%08X %08X|%08X\n",
i,
- readl(adapter->hw.hw_addr + i+4),
+ readl(adapter->hw.hw_addr + i + 4),
readl(adapter->hw.hw_addr + i),
- readl(adapter->hw.hw_addr + i+12),
- readl(adapter->hw.hw_addr + i+8));
+ readl(adapter->hw.hw_addr + i + 12),
+ readl(adapter->hw.hw_addr + i + 8));
}
exit:
return;
@@ -3733,14 +3736,14 @@ void e1000_update_stats(struct e1000_adapter
*adapter)
/* Phy Stats */
if (hw->media_type == e1000_media_type_copper) {
if ((adapter->link_speed == SPEED_1000) &&
- (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
+ (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
adapter->phy_stats.idle_errors += phy_tmp;
}
if ((hw->mac_type <= e1000_82546) &&
- (hw->phy_type == e1000_phy_m88) &&
- !e1000_read_phy_reg(hw, M88E1000_RX_ERR_CNTR, &phy_tmp))
+ (hw->phy_type == e1000_phy_m88) &&
+ !e1000_read_phy_reg(hw, M88E1000_RX_ERR_CNTR, &phy_tmp))
adapter->phy_stats.receive_errors += phy_tmp;
}
@@ -3856,6 +3859,7 @@ static bool e1000_clean_tx_irq(struct
e1000_adapter *adapter,
while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
(count < tx_ring->count)) {
bool cleaned = false;
+
dma_rmb(); /* read buffer_info after eop_desc */
for ( ; !cleaned; count++) {
tx_desc = E1000_TX_DESC(*tx_ring, i);
@@ -3869,7 +3873,6 @@ static bool e1000_clean_tx_irq(struct
e1000_adapter *adapter,
bytes_compl += buffer_info->skb->len;
pkts_compl++;
}
-
}
e1000_unmap_and_free_tx_resource(adapter, buffer_info);
tx_desc->upper.data = 0;
@@ -3910,7 +3913,6 @@ static bool e1000_clean_tx_irq(struct
e1000_adapter *adapter,
time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +
(adapter->tx_timeout_factor * HZ)) &&
!(er32(STATUS) & E1000_STATUS_TXOFF)) {
-
/* detected Tx unit hang */
e_err(drv, "Detected Tx Unit Hang\n"
" Tx Queue <%lu>\n"
@@ -4179,7 +4181,7 @@ static bool e1000_clean_jumbo_rx_irq(struct
e1000_adapter *adapter,
/* errors is only valid for DD + EOP descriptors */
if (unlikely((status & E1000_RXD_STAT_EOP) &&
- (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK))) {
+ (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)))
{
u8 *mapped = page_address(buffer_info->rxbuf.page);
if (e1000_tbi_should_accept(adapter, status,
@@ -4215,8 +4217,8 @@ process_skb:
} else {
/* this is the middle of a chain */
skb_fill_page_desc(rxtop,
- skb_shinfo(rxtop)->nr_frags,
- buffer_info->rxbuf.page, 0, length);
+ skb_shinfo(rxtop)->nr_frags,
+ buffer_info->rxbuf.page, 0,
length);
}
e1000_consume_page(buffer_info, rxtop, length);
goto next_desc;
@@ -4224,8 +4226,8 @@ process_skb:
if (rxtop) {
/* end of the chain */
skb_fill_page_desc(rxtop,
- skb_shinfo(rxtop)->nr_frags,
- buffer_info->rxbuf.page, 0, length);
+ skb_shinfo(rxtop)->nr_frags,
+ buffer_info->rxbuf.page, 0,
length);
skb = rxtop;
rxtop = NULL;
e1000_consume_page(buffer_info, skb, length);
@@ -4457,7 +4459,7 @@ process_skb:
*/
length -= 4;
- if (buffer_info->rxbuf.data == NULL)
+ if (!buffer_info->rxbuf.data)
skb_put(skb, length);
else /* copybreak skb */
skb_trim(skb, length);
@@ -4595,8 +4597,9 @@ static void e1000_alloc_rx_buffers(struct
e1000_adapter *adapter,
/* Fix for errata 23, can't cross 64kB boundary */
if (!e1000_check_64k_bound(adapter, data, bufsz)) {
void *olddata = data;
- e_err(rx_err, "skb align check failed: %u bytes at "
- "%p\n", bufsz, data);
+
+ e_err(rx_err, "skb align check failed: %u bytes at
%p\n",
+ bufsz, data);
/* Try again, without freeing the previous */
data = e1000_alloc_frag(adapter);
/* Failed allocation, critical failure */
@@ -4634,10 +4637,10 @@ static void e1000_alloc_rx_buffers(struct
e1000_adapter *adapter,
/* Fix for errata 23, can't cross 64kB boundary */
if (!e1000_check_64k_bound(adapter,
- (void *)(unsigned long)buffer_info->dma,
- adapter->rx_buffer_len)) {
- e_err(rx_err, "dma align check failed: %u bytes at "
- "%p\n", adapter->rx_buffer_len,
+ (void *)(unsigned
long)buffer_info->dma,
+ adapter->rx_buffer_len)) {
+ e_err(rx_err, "dma align check failed: %u bytes at
%p\n",
+ adapter->rx_buffer_len,
(void *)(unsigned long)buffer_info->dma);
dma_unmap_single(&pdev->dev, buffer_info->dma,
@@ -4687,7 +4690,7 @@ static void e1000_smartspeed(struct e1000_adapter
*adapter)
u16 phy_ctrl;
if ((hw->phy_type != e1000_phy_igp) || !hw->autoneg ||
- !(hw->autoneg_advertised & ADVERTISE_1000_FULL))
+ !(hw->autoneg_advertised & ADVERTISE_1000_FULL))
return;
if (adapter->smartspeed == 0) {
@@ -4707,7 +4710,7 @@ static void e1000_smartspeed(struct e1000_adapter
*adapter)
phy_ctrl);
adapter->smartspeed++;
if (!e1000_phy_setup_autoneg(hw) &&
- !e1000_read_phy_reg(hw, PHY_CTRL,
+ !e1000_read_phy_reg(hw, PHY_CTRL,
&phy_ctrl)) {
phy_ctrl |= (MII_CR_AUTO_NEG_EN |
MII_CR_RESTART_AUTO_NEG);
@@ -4722,7 +4725,7 @@ static void e1000_smartspeed(struct e1000_adapter
*adapter)
phy_ctrl |= CR_1000T_MS_ENABLE;
e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_ctrl);
if (!e1000_phy_setup_autoneg(hw) &&
- !e1000_read_phy_reg(hw, PHY_CTRL, &phy_ctrl)) {
+ !e1000_read_phy_reg(hw, PHY_CTRL, &phy_ctrl)) {
phy_ctrl |= (MII_CR_AUTO_NEG_EN |
MII_CR_RESTART_AUTO_NEG);
e1000_write_phy_reg(hw, PHY_CTRL, phy_ctrl);
@@ -4777,7 +4780,7 @@ static int e1000_mii_ioctl(struct net_device
*netdev, struct ifreq *ifr,
case SIOCGMIIREG:
spin_lock_irqsave(&adapter->stats_lock, flags);
if (e1000_read_phy_reg(hw, data->reg_num & 0x1F,
- &data->val_out)) {
+ &data->val_out)) {
spin_unlock_irqrestore(&adapter->stats_lock, flags);
return -EIO;
}
@@ -4804,6 +4807,7 @@ static int e1000_mii_ioctl(struct net_device
*netdev, struct ifreq *ifr,
hw->autoneg_advertised = 0x2F;
} else {
u32 speed;
+
if (mii_reg & 0x40)
speed = SPEED_1000;
else if (mii_reg & 0x2000)
@@ -4867,12 +4871,14 @@ void e1000_pci_clear_mwi(struct e1000_hw *hw)
int e1000_pcix_get_mmrbc(struct e1000_hw *hw)
{
struct e1000_adapter *adapter = hw->back;
+
return pcix_get_mmrbc(adapter->pdev);
}
void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc)
{
struct e1000_adapter *adapter = hw->back;
+
pcix_set_mmrbc(adapter->pdev, mmrbc);
}
@@ -4906,6 +4912,7 @@ static void __e1000_vlan_mode(struct e1000_adapter
*adapter,
}
ew32(CTRL, ctrl);
}
+
static void e1000_vlan_filter_on_off(struct e1000_adapter *adapter,
bool filter_on)
{
--
1.9.1
From 40c55c64a19e920a0db8bcc0cd4cd5cac19ba451 Mon Sep 17 00:00:00 2001
From: Janusz Wolak <janusz...@gmail.com>
Date: Tue, 6 Oct 2015 22:23:31 +0200
Subject: [PATCH 2/6] Remove checkpatch errors, warnings, ckecks.
Signed-off-by: Janusz Wolak <janusz...@gmail.com>
---
drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 31
++++++++++++++----------
1 file changed, 18 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
index 4270ad2..c4ffab4 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
@@ -36,12 +36,12 @@ struct e1000_stats {
int stat_offset;
};
-#define E1000_STAT(m) E1000_STATS, \
+#define E1000_STAT(m) (E1000_STATS, \
sizeof(((struct e1000_adapter *)0)->m), \
- offsetof(struct e1000_adapter, m)
-#define E1000_NETDEV_STAT(m) NETDEV_STATS, \
+ offsetof(struct e1000_adapter, m))
+#define E1000_NETDEV_STAT(m) (NETDEV_STATS, \
sizeof(((struct net_device *)0)->m), \
- offsetof(struct net_device, m)
+ offsetof(struct net_device, m))
static const struct e1000_stats e1000_gstrings_stats[] = {
{ "rx_packets", E1000_STAT(stats.gprc) },
@@ -114,7 +114,7 @@ static int e1000_get_settings(struct net_device *netdev,
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
- SUPPORTED_1000baseT_Full|
+ SUPPORTED_1000baseT_Full |
SUPPORTED_Autoneg |
SUPPORTED_TP);
ecmd->advertising = ADVERTISED_TP;
@@ -708,8 +708,7 @@ static bool reg_set_and_check(struct e1000_adapter
*adapter, u64 *data, int reg,
writel(write & mask, address);
read = readl(address);
if ((read & mask) != (write & mask)) {
- e_err(drv, "set/check reg %04X test failed: "
- "got 0x%08X expected 0x%08X\n",
+ e_err(drv, "set/check reg %04X test failed: got 0x%08X expected
0x%08X\n",
reg, (read & mask), (write & mask));
*data = reg;
return true;
@@ -1021,7 +1020,8 @@ static int e1000_setup_desc_rings(struct
e1000_adapter *adapter)
ret_val = 2;
goto err_nomem;
}
- txdr->next_to_use = txdr->next_to_clean = 0;
+ txdr->next_to_use = 0;
+ txdr->next_to_clean = 0;
ew32(TDBAL, ((u64)txdr->dma & 0x00000000FFFFFFFF));
ew32(TDBAH, ((u64)txdr->dma >> 32));
@@ -1079,7 +1079,8 @@ static int e1000_setup_desc_rings(struct
e1000_adapter *adapter)
ret_val = 6;
goto err_nomem;
}
- rxdr->next_to_use = rxdr->next_to_clean = 0;
+ rxdr->next_to_use = 0;
+ rxdr->next_to_clean = 0;
rctl = er32(RCTL);
ew32(RCTL, rctl & ~E1000_RCTL_EN);
@@ -1251,7 +1252,7 @@ static int e1000_integrated_phy_loopback(struct
e1000_adapter *adapter)
ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
- E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
+ E1000_CTRL_SPD_1000 | /* Force Speed to 1000 */
E1000_CTRL_FD); /* Force Duplex to FULL */
if (hw->media_type == e1000_media_type_copper &&
@@ -1293,7 +1294,8 @@ static int e1000_set_phy_loopback(struct
e1000_adapter *adapter)
* attempt this 10 times.
*/
while (e1000_nonintegrated_phy_loopback(adapter) &&
- count++ < 10);
+ count++ < 10)
+ ;
if (count < 11)
return 0;
}
@@ -1420,7 +1422,9 @@ static int e1000_run_loopback_test(struct
e1000_adapter *adapter)
else
lc = ((rxdr->count / 64) * 2) + 1;
- k = l = 0;
+ k = 0;
+ l = 0;
+
for (j = 0; j <= lc; j++) { /* loop count loop */
for (i = 0; i < 64; i++) { /* send the packets */
e1000_create_lbtest_frame(txdr->buffer_info[i].skb,
@@ -1796,7 +1800,8 @@ static int e1000_set_coalesce(struct net_device
*netdev,
return -EINVAL;
if (ec->rx_coalesce_usecs == 4) {
- adapter->itr = adapter->itr_setting = 4;
+ adapter->itr = 4;
+ adapter->itr_setting = 4;
} else if (ec->rx_coalesce_usecs <= 3) {
adapter->itr = 20000;
adapter->itr_setting = ec->rx_coalesce_usecs;
--
1.9.1
From 4f87c1a56fdbc431bb061857f7accc0671464caa Mon Sep 17 00:00:00 2001
From: Janusz Wolak <janusz...@gmail.com>
Date: Thu, 8 Oct 2015 22:13:12 +0200
Subject: [PATCH 3/6] Remove checkpatch errors, warnings, ckecks.
Signed-off-by: Janusz Wolak <janusz...@gmail.com>
---
drivers/net/ethernet/intel/e1000/e1000.h | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000/e1000.h
b/drivers/net/ethernet/intel/e1000/e1000.h
index 6970710..ec82b2d 100644
--- a/drivers/net/ethernet/intel/e1000/e1000.h
+++ b/drivers/net/ethernet/intel/e1000/e1000.h
@@ -1,5 +1,5 @@
/*******************************************************************************
-
+*
Intel PRO/1000 Linux driver
Copyright(c) 1999 - 2006 Intel Corporation.
@@ -26,7 +26,6 @@
*******************************************************************************/
-
/* Linux PRO/1000 Ethernet Driver main header file */
#ifndef _E1000_H_
@@ -53,7 +52,7 @@
#include <linux/pagemap.h>
#include <linux/dma-mapping.h>
#include <linux/bitops.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/irq.h>
#include <linux/capability.h>
#include <linux/in.h>
@@ -82,8 +81,7 @@ struct e1000_adapter;
#define E1000_MAX_INTR 10
-/*
- * Count for polling __E1000_RESET condition every 10-20msec.
+/* Count for polling __E1000_RESET condition every 10-20msec.
*/
#define E1000_CHECK_RESET_COUNT 50
--
1.9.1
From 3cbe87d4e9b0cf579c25f746cba38038b920119c Mon Sep 17 00:00:00 2001
From: Janusz Wolak <janusz...@gmail.com>
Date: Sun, 11 Oct 2015 15:47:24 +0200
Subject: [PATCH 4/6] Remove checkpatch errors, warnings, ckecks.
Signed-off-by: Janusz Wolak <janusz...@gmail.com>
---
drivers/net/ethernet/intel/e1000/e1000_hw.h | 154
+++++++++++++++-------------
1 file changed, 80 insertions(+), 74 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.h
b/drivers/net/ethernet/intel/e1000/e1000_hw.h
index 5cf7268c..65a9640 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.h
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.h
@@ -1,5 +1,5 @@
/*******************************************************************************
-
+*
Intel PRO/1000 Linux driver
Copyright(c) 1999 - 2006 Intel Corporation.
@@ -285,7 +285,7 @@ typedef enum {
#define E1000_BLK_PHY_RESET 12
#define E1000_BYTE_SWAP_WORD(_value) ((((_value) & 0x00ff) << 8) | \
- (((_value) & 0xff00) >> 8))
+ (((_value) & 0xff00) >> 8))
/* Function prototypes */
/* Initialization */
@@ -299,11 +299,11 @@ s32 e1000_setup_link(struct e1000_hw *hw);
s32 e1000_phy_setup_autoneg(struct e1000_hw *hw);
void e1000_config_collision_dist(struct e1000_hw *hw);
s32 e1000_check_for_link(struct e1000_hw *hw);
-s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 * speed, u16 *
duplex);
+s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16
*duplex);
s32 e1000_force_mac_fc(struct e1000_hw *hw);
/* PHY */
-s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 * phy_data);
+s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data);
s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 data);
s32 e1000_phy_hw_reset(struct e1000_hw *hw);
s32 e1000_phy_reset(struct e1000_hw *hw);
@@ -344,6 +344,7 @@ struct e1000_host_mng_command_info {
struct e1000_host_mng_command_header command_header; /* Command
Head/Command Result Head has 4 bytes */
u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; /* Command data can
length 0..0x658 */
};
+
#ifdef __BIG_ENDIAN
struct e1000_host_mng_dhcp_cookie {
u32 signature;
@@ -369,16 +370,16 @@ struct e1000_host_mng_dhcp_cookie {
#endif
bool e1000_check_mng_mode(struct e1000_hw *hw);
-s32 e1000_read_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 * data);
+s32 e1000_read_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 *data);
s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw);
s32 e1000_update_eeprom_checksum(struct e1000_hw *hw);
-s32 e1000_write_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 *
data);
+s32 e1000_write_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 *data);
s32 e1000_read_mac_addr(struct e1000_hw *hw);
/* Filters (multicast, vlan, receive) */
-u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 * mc_addr);
+u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr);
void e1000_mta_set(struct e1000_hw *hw, u32 hash_value);
-void e1000_rar_set(struct e1000_hw *hw, u8 * mc_addr, u32 rar_index);
+void e1000_rar_set(struct e1000_hw *hw, u8 *mc_addr, u32 rar_index);
void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value);
/* LED functions */
@@ -401,10 +402,8 @@ int e1000_pcix_get_mmrbc(struct e1000_hw *hw);
/* Port I/O is only supported on 82544 and newer */
void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value);
-#define E1000_READ_REG_IO(a, reg) \
- e1000_read_reg_io((a), E1000_##reg)
-#define E1000_WRITE_REG_IO(a, reg, val) \
- e1000_write_reg_io((a), E1000_##reg, val)
+#define E1000_READ_REG_IO(a, reg) e1000_read_reg_io((a), E1000_##reg)
+#define E1000_WRITE_REG_IO(a, reg, val) e1000_write_reg_io((a),
E1000_##reg, val)
/* PCI Device IDs */
#define E1000_DEV_ID_82542 0x1000
@@ -467,8 +466,7 @@ void e1000_io_write(struct e1000_hw *hw, unsigned
long port, u32 value);
#define ENET_HEADER_SIZE 14
#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */
#define ETHERNET_FCS_SIZE 4
-#define MINIMUM_ETHERNET_PACKET_SIZE \
- (MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
+#define MINIMUM_ETHERNET_PACKET_SIZE (MINIMUM_ETHERNET_FRAME_SIZE -
ETHERNET_FCS_SIZE)
#define CRC_LENGTH ETHERNET_FCS_SIZE
#define MAX_JUMBO_FRAME_SIZE 0x3F00
@@ -489,9 +487,7 @@ void e1000_io_write(struct e1000_hw *hw, unsigned
long port, u32 value);
* o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
* o RXSEQ = Receive Sequence Error
*/
-#define POLL_IMS_ENABLE_MASK ( \
- E1000_IMS_RXDMT0 | \
- E1000_IMS_RXSEQ)
+#define POLL_IMS_ENABLE_MASK (E1000_IMS_RXDMT0 | E1000_IMS_RXSEQ)
/* This defines the bits that are set in the Interrupt Mask
* Set/Read Register. Each bit is documented below:
@@ -501,12 +497,8 @@ void e1000_io_write(struct e1000_hw *hw, unsigned
long port, u32 value);
* o RXSEQ = Receive Sequence Error
* o LSC = Link Status Change
*/
-#define IMS_ENABLE_MASK ( \
- E1000_IMS_RXT0 | \
- E1000_IMS_TXDW | \
- E1000_IMS_RXDMT0 | \
- E1000_IMS_RXSEQ | \
- E1000_IMS_LSC)
+#define IMS_ENABLE_MASK (E1000_IMS_RXT0 | E1000_IMS_TXDW |
E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ | E1000_IMS_LSC)
/* Number of high/low register pairs in the RAR. The RAR (Receive Address
* Registers) holds the directed and multicast addresses that we
monitor. We
@@ -621,20 +613,16 @@ union e1000_rx_desc_packet_split {
#define E1000_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF
/* mask to determine if packets should be dropped due to frame errors */
-#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
- E1000_RXD_ERR_CE | \
- E1000_RXD_ERR_SE | \
- E1000_RXD_ERR_SEQ | \
- E1000_RXD_ERR_CXE | \
- E1000_RXD_ERR_RXE)
+#define E1000_RXD_ERR_FRAME_ERR_MASK (E1000_RXD_ERR_CE |
E1000_RXD_ERR_SE | \
+ E1000_RXD_ERR_SEQ | E1000_RXD_ERR_CXE | \
+ E1000_RXD_ERR_RXE)
/* Same mask, but for extended and packet split descriptors */
-#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
- E1000_RXDEXT_STATERR_CE | \
- E1000_RXDEXT_STATERR_SE | \
- E1000_RXDEXT_STATERR_SEQ | \
- E1000_RXDEXT_STATERR_CXE | \
- E1000_RXDEXT_STATERR_RXE)
+#define E1000_RXDEXT_ERR_FRAME_ERR_MASK (E1000_RXDEXT_STATERR_CE | \
+ E1000_RXDEXT_STATERR_SE | \
+ E1000_RXDEXT_STATERR_SEQ | \
+ E1000_RXDEXT_STATERR_CXE | \
+ E1000_RXDEXT_STATERR_RXE)
/* Transmit Descriptor */
struct e1000_tx_desc {
@@ -1094,7 +1082,8 @@ struct e1000_ffvt_entry {
#define E1000_82542_RDH0 E1000_82542_RDH
#define E1000_82542_RDT0 E1000_82542_RDT
#define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8)) /* Split and
Replication
- * RX Control - RW */
+ * RX Control - RW
+ */
#define E1000_82542_DCA_RXCTRL(_n) (0x02814 + ((_n) << 8))
#define E1000_82542_RDBAH3 0x02B04 /* RX Desc Base High Queue 3 - RW */
#define E1000_82542_RDBAL3 0x02B00 /* RX Desc Low Queue 3 - RW */
@@ -1494,7 +1483,8 @@ struct e1000_hw {
#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion
- by EEPROM/Flash */
+ * by EEPROM/Flash
+ */
#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */
#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock
state. Clear on write '0'. */
#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master
requests. */
@@ -1533,7 +1523,8 @@ struct e1000_hw {
#define E1000_EECD_PRES 0x00000100 /* EEPROM Present */
#define E1000_EECD_SIZE 0x00000200 /* EEPROM Size (0=64 word
1=256 word) */
#define E1000_EECD_ADDR_BITS 0x00000400 /* EEPROM Addressing bits
based on type
- * (0-small, 1-large) */
+ * (0-small, 1-large)
+ */
#define E1000_EECD_TYPE 0x00002000 /* EEPROM Type (1-SPI,
0-Microwire) */
#ifndef E1000_EEPROM_GRANT_ATTEMPTS
#define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain
grant */
@@ -1949,7 +1940,8 @@ struct e1000_hw {
#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */
#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc.
- still to be processed. */
+ * still to be processed.
+ */
/* Transmit Configuration Word */
#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */
#define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */
@@ -2059,7 +2051,8 @@ struct e1000_hw {
#define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */
#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request
Filtering */
#define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery
- * Filtering */
+ * Filtering
+ */
#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response
Filtering */
#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */
#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets
Enabled */
@@ -2067,11 +2060,14 @@ struct e1000_hw {
#define E1000_MANC_RCV_ALL 0x00080000 /* Receive All Enabled */
#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address
- * filtering */
+ * filtering
+ */
#define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable MNG packets to host
- * memory */
+ * memory
+ */
#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 /* Enable IP address
- * filtering */
+ * filtering
+ */
#define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum
filtering */
#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast
filtering */
#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */
@@ -2118,7 +2114,8 @@ typedef enum {
/* Host Interface Control Register */
#define E1000_HICR_EN 0x00000001 /* Enable Bit - RO */
#define E1000_HICR_C 0x00000002 /* Driver sets this bit
when done
- * to put command in RAM */
+ * to put command in RAM
+ */
#define E1000_HICR_SV 0x00000004 /* Status Validity */
#define E1000_HICR_FWR 0x00000080 /* FW reset. Set by the Host */
@@ -2134,6 +2131,7 @@ struct e1000_host_command_header {
u8 command_options; /* I/F bits for command, status for return */
u8 checksum;
};
+
struct e1000_host_command_info {
struct e1000_host_command_header command_header; /* Command
Head/Command Result Head has 4 bytes */
u8 command_data[E1000_HI_MAX_DATA_LENGTH]; /* Command data can length
0..252 */
@@ -2170,11 +2168,11 @@ struct e1000_host_command_info {
#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020
#define PCI_EX_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \
- E1000_GCR_RXDSCW_NO_SNOOP | \
- E1000_GCR_RXDSCR_NO_SNOOP | \
- E1000_GCR_TXD_NO_SNOOP | \
- E1000_GCR_TXDSCW_NO_SNOOP | \
- E1000_GCR_TXDSCR_NO_SNOOP)
+ E1000_GCR_RXDSCW_NO_SNOOP | \
+ E1000_GCR_RXDSCR_NO_SNOOP | \
+ E1000_GCR_TXD_NO_SNOOP | \
+ E1000_GCR_TXDSCW_NO_SNOOP | \
+ E1000_GCR_TXDSCR_NO_SNOOP)
#define PCI_EX_82566_SNOOP_ALL PCI_EX_NO_SNOOP_ALL
@@ -2257,9 +2255,9 @@ struct e1000_host_command_info {
#define ID_LED_RESERVED_0000 0x0000
#define ID_LED_RESERVED_FFFF 0xFFFF
#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
- (ID_LED_OFF1_OFF2 << 8) | \
- (ID_LED_DEF1_DEF2 << 4) | \
- (ID_LED_DEF1_DEF2))
+ (ID_LED_OFF1_OFF2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_DEF1_DEF2))
#define ID_LED_DEF1_DEF2 0x1
#define ID_LED_DEF1_ON2 0x2
#define ID_LED_DEF1_OFF2 0x3
@@ -2318,7 +2316,8 @@ struct e1000_host_command_info {
#define E1000_COLLISION_THRESHOLD 15
#define E1000_CT_SHIFT 4
/* Collision distance is a 0-based value that applies to
- * half-duplex-capable hardware only. */
+ * half-duplex-capable hardware only.
+ */
#define E1000_COLLISION_DISTANCE 63
#define E1000_COLLISION_DISTANCE_82542 64
#define E1000_FDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE
@@ -2482,10 +2481,10 @@ struct e1000_host_command_info {
(((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \
((last_byte) == CARRIER_EXTENSION) && \
(((status) & E1000_RXD_STAT_VP) ? \
- (((length) > ((adapter)->min_frame_size - VLAN_TAG_SIZE)) && \
- ((length) <= ((adapter)->max_frame_size + 1))) : \
- (((length) > (adapter)->min_frame_size) && \
- ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1)))))
+ (((length) > ((adapter)->min_frame_size - VLAN_TAG_SIZE)) && \
+ ((length) <= ((adapter)->max_frame_size + 1))) : \
+ (((length) > (adapter)->min_frame_size) && \
+ ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1)))))
/* Structures, enums, and macros for the PHY */
@@ -2582,7 +2581,8 @@ struct e1000_host_command_info {
#define IGP01E1000_PHY_DSP_FFE_DEFAULT 0x002A
/* IGP01E1000 PCS Initialization register - stores the polarity status
when
- * speed = 1000 Mbps. */
+ * speed = 1000 Mbps.
+ */
#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
#define IGP01E1000_PHY_PCS_CTRL_REG 0x00B5
@@ -2739,10 +2739,12 @@ struct e1000_host_command_info {
#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE 0x0080
/* 1=Enable Extended 10BASE-T distance
* (Lower 10BASE-T RX Threshold)
- * 0=Normal 10BASE-T RX Threshold */
+ * 0=Normal 10BASE-T RX Threshold
+ */
#define M88E1000_PSCR_MII_5BIT_ENABLE 0x0100
/* 1=5-Bit interface in 100BASE-TX
- * 0=MII interface in 100BASE-TX */
+ * 0=MII interface in 100BASE-TX
+ */
#define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler
disable */
#define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on
Transmit */
@@ -2757,7 +2759,8 @@ struct e1000_host_command_info {
#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */
#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
#define M88E1000_PSSR_CABLE_LENGTH 0x0380 /*
0=<50M;1=50-80M;2=80-110M;
- * 3=110-140M;4=>140M */
+ * 3=110-140M;4=>140M
+ */
#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link
down */
#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex
resolved */
#define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */
@@ -2780,14 +2783,16 @@ struct e1000_host_command_info {
* within 1ms in 1000BASE-T
*/
/* Number of times we will attempt to autonegotiate before
downshifting if we
- * are the master */
+ * are the master
+ */
#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000
#define M88E1000_EPSCR_MASTER_DOWNSHIFT_2X 0x0400
#define M88E1000_EPSCR_MASTER_DOWNSHIFT_3X 0x0800
#define M88E1000_EPSCR_MASTER_DOWNSHIFT_4X 0x0C00
/* Number of times we will attempt to autonegotiate before
downshifting if we
- * are the slave */
+ * are the slave
+ */
#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300
#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_DIS 0x0000
#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
@@ -2891,7 +2896,8 @@ struct e1000_host_command_info {
/* IGP01E1000 GMII FIFO Register */
#define IGP01E1000_GMII_FLEX_SPD 0x10 /* Enable flexible
speed
- * on Link-Up */
+ * on Link-Up
+ */
#define IGP01E1000_GMII_SPD 0x20 /* Enable SPD */
/* IGP01E1000 Analog Register */
@@ -2938,32 +2944,32 @@ struct e1000_host_command_info {
*/
#define PHY_PAGE_SHIFT 5
#define PHY_REG(page, reg) \
- (((page) << PHY_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
+ (((page) << PHY_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
#define IGP3_PHY_PORT_CTRL \
- PHY_REG(769, 17) /* Port General Configuration */
+ PHY_REG(769, 17) /* Port General Configuration */
#define IGP3_PHY_RATE_ADAPT_CTRL \
- PHY_REG(769, 25) /* Rate Adapter Control Register */
+ PHY_REG(769, 25) /* Rate Adapter Control Register */
#define IGP3_KMRN_FIFO_CTRL_STATS \
- PHY_REG(770, 16) /* KMRN FIFO's control/status register */
+ PHY_REG(770, 16) /* KMRN FIFO's control/status register */
#define IGP3_KMRN_POWER_MNG_CTRL \
- PHY_REG(770, 17) /* KMRN Power Management Control Register */
+ PHY_REG(770, 17) /* KMRN Power Management Control Register */
#define IGP3_KMRN_INBAND_CTRL \
- PHY_REG(770, 18) /* KMRN Inband Control Register */
+ PHY_REG(770, 18) /* KMRN Inband Control Register */
#define IGP3_KMRN_DIAG \
- PHY_REG(770, 19) /* KMRN Diagnostic register */
+ PHY_REG(770, 19) /* KMRN Diagnostic register */
#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 /* RX PCS is not synced */
#define IGP3_KMRN_ACK_TIMEOUT \
- PHY_REG(770, 20) /* KMRN Acknowledge Timeouts register */
+ PHY_REG(770, 20) /* KMRN Acknowledge Timeouts register */
#define IGP3_VR_CTRL \
- PHY_REG(776, 18) /* Voltage regulator control register */
+ PHY_REG(776, 18) /* Voltage regulator control register */
#define IGP3_VR_CTRL_MODE_SHUT 0x0200 /* Enter powerdown,
shutdown VRs */
#define IGP3_VR_CTRL_MODE_MASK 0x0300 /* Shutdown VR Mask */
#define IGP3_CAPABILITY \
- PHY_REG(776, 19) /* IGP3 Capability Register */
+ PHY_REG(776, 19) /* IGP3 Capability Register */
/* Capabilities for SKU Control */
#define IGP3_CAP_INITIATE_TEAM 0x0001 /* Able to initiate a team */
--
1.9.1
From acdfc51648a79bb73e0afa03b9b3001dce6731ec Mon Sep 17 00:00:00 2001
From: Janusz Wolak <janusz...@gmail.com>
Date: Sun, 11 Oct 2015 16:37:58 +0200
Subject: [PATCH 5/6] Remove checkpatch errors, warnings, ckecks.
Signed-off-by: Janusz Wolak <janusz...@gmail.com>
---
drivers/net/ethernet/intel/e1000/e1000_param.c | 114
++++++++++++++++++-------
1 file changed, 82 insertions(+), 32 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000/e1000_param.c
b/drivers/net/ethernet/intel/e1000/e1000_param.c
index c9cde35..9ec730e 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_param.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_param.c
@@ -1,5 +1,5 @@
/*******************************************************************************
-
+*
Intel PRO/1000 Linux driver
Copyright(c) 1999 - 2006 Intel Corporation.
@@ -45,10 +45,10 @@
#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
#define E1000_PARAM(X, desc) \
- static int X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
+ static int X[E1000_MAX_NIC + 1] = E1000_PARAM_INIT; \
static unsigned int num_##X; \
module_param_array_named(X, X, int, &num_##X, 0); \
- MODULE_PARM_DESC(X, desc);
+ MODULE_PARM_DESC(X, desc)
/* Transmit Descriptor Count
*
@@ -200,6 +200,7 @@ struct e1000_option {
} r;
struct { /* list_option info */
int nr;
+
const struct e1000_opt_list { int i; char *str; } *p;
} l;
} arg;
@@ -250,7 +251,7 @@ static int e1000_validate_option(unsigned int *value,
}
e_dev_info("Invalid %s value specified (%i) %s\n",
- opt->name, *value, opt->err);
+ opt->name, *value, opt->err);
*value = opt->def;
return -1;
}
@@ -291,7 +292,8 @@ void e1000_check_options(struct e1000_adapter *adapter)
.arg = { .r = {
.min = E1000_MIN_TXD,
.max = mac_type < e1000_82544 ? E1000_MAX_TXD :
E1000_MAX_82544_TXD
- }}
+ }
+ }
};
if (num_TxDescriptors > bd) {
@@ -320,7 +322,8 @@ void e1000_check_options(struct e1000_adapter *adapter)
.min = E1000_MIN_RXD,
.max = mac_type < e1000_82544 ? E1000_MAX_RXD :
E1000_MAX_82544_RXD
- }}
+ }
+ }
};
if (num_RxDescriptors > bd) {
@@ -344,6 +347,7 @@ void e1000_check_options(struct e1000_adapter *adapter)
if (num_XsumRX > bd) {
unsigned int rx_csum = XsumRX[bd];
+
e1000_validate_option(&rx_csum, &opt, adapter);
adapter->rx_csum = rx_csum;
} else {
@@ -366,15 +370,20 @@ void e1000_check_options(struct e1000_adapter
*adapter)
.err = "reading default settings from EEPROM",
.def = E1000_FC_DEFAULT,
.arg = { .l = { .nr = ARRAY_SIZE(fc_list),
- .p = fc_list }}
+ .p = fc_list
+ }
+ }
};
if (num_FlowControl > bd) {
unsigned int fc = FlowControl[bd];
+
e1000_validate_option(&fc, &opt, adapter);
- adapter->hw.fc = adapter->hw.original_fc = fc;
+ adapter->hw.fc = fc;
+ adapter->hw.original_fc = fc;
} else {
- adapter->hw.fc = adapter->hw.original_fc = opt.def;
+ adapter->hw.fc = opt.def;
+ adapter->hw.original_fc = opt.def;
}
}
{ /* Transmit Interrupt Delay */
@@ -384,13 +393,15 @@ void e1000_check_options(struct e1000_adapter
*adapter)
.err = "using default of "
__MODULE_STRING(DEFAULT_TIDV),
.def = DEFAULT_TIDV,
.arg = { .r = { .min = MIN_TXDELAY,
- .max = MAX_TXDELAY }}
+ .max = MAX_TXDELAY
+ }
+ }
};
if (num_TxIntDelay > bd) {
adapter->tx_int_delay = TxIntDelay[bd];
e1000_validate_option(&adapter->tx_int_delay, &opt,
- adapter);
+ adapter);
} else {
adapter->tx_int_delay = opt.def;
}
@@ -402,7 +413,9 @@ void e1000_check_options(struct e1000_adapter *adapter)
.err = "using default of "
__MODULE_STRING(DEFAULT_TADV),
.def = DEFAULT_TADV,
.arg = { .r = { .min = MIN_TXABSDELAY,
- .max = MAX_TXABSDELAY }}
+ .max = MAX_TXABSDELAY
+ }
+ }
};
if (num_TxAbsIntDelay > bd) {
@@ -420,7 +433,9 @@ void e1000_check_options(struct e1000_adapter *adapter)
.err = "using default of "
__MODULE_STRING(DEFAULT_RDTR),
.def = DEFAULT_RDTR,
.arg = { .r = { .min = MIN_RXDELAY,
- .max = MAX_RXDELAY }}
+ .max = MAX_RXDELAY
+ }
+ }
};
if (num_RxIntDelay > bd) {
@@ -438,7 +453,9 @@ void e1000_check_options(struct e1000_adapter *adapter)
.err = "using default of "
__MODULE_STRING(DEFAULT_RADV),
.def = DEFAULT_RADV,
.arg = { .r = { .min = MIN_RXABSDELAY,
- .max = MAX_RXABSDELAY }}
+ .max = MAX_RXABSDELAY
+ }
+ }
};
if (num_RxAbsIntDelay > bd) {
@@ -456,7 +473,9 @@ void e1000_check_options(struct e1000_adapter *adapter)
.err = "using default of "
__MODULE_STRING(DEFAULT_ITR),
.def = DEFAULT_ITR,
.arg = { .r = { .min = MIN_ITR,
- .max = MAX_ITR }}
+ .max = MAX_ITR
+ }
+ }
};
if (num_InterruptThrottleRate > bd) {
@@ -508,6 +527,7 @@ void e1000_check_options(struct e1000_adapter *adapter)
if (num_SmartPowerDownEnable > bd) {
unsigned int spd = SmartPowerDownEnable[bd];
+
e1000_validate_option(&spd, &opt, adapter);
adapter->smart_power_down = spd;
} else {
@@ -537,6 +557,7 @@ void e1000_check_options(struct e1000_adapter *adapter)
static void e1000_check_fiber_options(struct e1000_adapter *adapter)
{
int bd = adapter->bd_number;
+
if (num_Speed > bd) {
e_dev_info("Speed not valid for fiber adapters, parameter "
"ignored\n");
@@ -570,7 +591,8 @@ static void e1000_check_copper_options(struct
e1000_adapter *adapter)
{ 0, "" },
{ SPEED_10, "" },
{ SPEED_100, "" },
- { SPEED_1000, "" }};
+ { SPEED_1000, "" }
+ };
opt = (struct e1000_option) {
.type = list_option,
@@ -578,7 +600,9 @@ static void e1000_check_copper_options(struct
e1000_adapter *adapter)
.err = "parameter ignored",
.def = 0,
.arg = { .l = { .nr = ARRAY_SIZE(speed_list),
- .p = speed_list }}
+ .p = speed_list
+ }
+ }
};
if (num_Speed > bd) {
@@ -592,7 +616,8 @@ static void e1000_check_copper_options(struct
e1000_adapter *adapter)
static const struct e1000_opt_list dplx_list[] = {
{ 0, "" },
{ HALF_DUPLEX, "" },
- { FULL_DUPLEX, "" }};
+ { FULL_DUPLEX, "" }
+ };
opt = (struct e1000_option) {
.type = list_option,
@@ -600,7 +625,9 @@ static void e1000_check_copper_options(struct
e1000_adapter *adapter)
.err = "parameter ignored",
.def = 0,
.arg = { .l = { .nr = ARRAY_SIZE(dplx_list),
- .p = dplx_list }}
+ .p = dplx_list
+ }
+ }
};
if (num_Duplex > bd) {
@@ -648,7 +675,8 @@ static void e1000_check_copper_options(struct
e1000_adapter *adapter)
{ 0x2c, AA "1000/FD, 100/FD, 100/HD" },
{ 0x2d, AA "1000/FD, 100/FD, 100/HD, 10/HD" },
{ 0x2e, AA "1000/FD, 100/FD, 100/HD, 10/FD" },
- { 0x2f, AA "1000/FD, 100/FD, 100/HD, 10/FD, 10/HD" }};
+ { 0x2f, AA "1000/FD, 100/FD, 100/HD, 10/FD, 10/HD" }
+ };
opt = (struct e1000_option) {
.type = list_option,
@@ -656,7 +684,9 @@ static void e1000_check_copper_options(struct
e1000_adapter *adapter)
.err = "parameter ignored",
.def = AUTONEG_ADV_DEFAULT,
.arg = { .l = { .nr = ARRAY_SIZE(an_list),
- .p = an_list }}
+ .p = an_list
+ }
+ }
};
if (num_AutoNeg > bd) {
@@ -670,7 +700,9 @@ static void e1000_check_copper_options(struct
e1000_adapter *adapter)
switch (speed + dplx) {
case 0:
- adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg = 1;
+ adapter->fc_autoneg = 1;
+
if ((num_Speed > bd) && (speed != 0 || dplx != 0))
e_dev_info("Speed and duplex autonegotiation "
"enabled\n");
@@ -678,14 +710,18 @@ static void e1000_check_copper_options(struct
e1000_adapter *adapter)
case HALF_DUPLEX:
e_dev_info("Half Duplex specified without Speed\n");
e_dev_info("Using Autonegotiation at Half Duplex only\n");
- adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg = 1;
+ adapter->fc_autoneg = 1;
+
adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
ADVERTISE_100_HALF;
break;
case FULL_DUPLEX:
e_dev_info("Full Duplex specified without Speed\n");
e_dev_info("Using Autonegotiation at Full Duplex only\n");
- adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg = 1;
+ adapter->fc_autoneg = 1;
+
adapter->hw.autoneg_advertised = ADVERTISE_10_FULL |
ADVERTISE_100_FULL |
ADVERTISE_1000_FULL;
@@ -693,38 +729,50 @@ static void e1000_check_copper_options(struct
e1000_adapter *adapter)
case SPEED_10:
e_dev_info("10 Mbps Speed specified without Duplex\n");
e_dev_info("Using Autonegotiation at 10 Mbps only\n");
- adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg = 1;
+ adapter->fc_autoneg = 1;
+
adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
ADVERTISE_10_FULL;
break;
case SPEED_10 + HALF_DUPLEX:
e_dev_info("Forcing to 10 Mbps Half Duplex\n");
- adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.autoneg = 0;
+ adapter->fc_autoneg = 0;
+
adapter->hw.forced_speed_duplex = e1000_10_half;
adapter->hw.autoneg_advertised = 0;
break;
case SPEED_10 + FULL_DUPLEX:
e_dev_info("Forcing to 10 Mbps Full Duplex\n");
- adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.autoneg = 0;
+ adapter->fc_autoneg = 0;
+
adapter->hw.forced_speed_duplex = e1000_10_full;
adapter->hw.autoneg_advertised = 0;
break;
case SPEED_100:
e_dev_info("100 Mbps Speed specified without Duplex\n");
e_dev_info("Using Autonegotiation at 100 Mbps only\n");
- adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg = 1;
+ adapter->fc_autoneg = 1;
+
adapter->hw.autoneg_advertised = ADVERTISE_100_HALF |
ADVERTISE_100_FULL;
break;
case SPEED_100 + HALF_DUPLEX:
e_dev_info("Forcing to 100 Mbps Half Duplex\n");
- adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.autoneg = 0;
+ adapter->fc_autoneg = 0;
+
adapter->hw.forced_speed_duplex = e1000_100_half;
adapter->hw.autoneg_advertised = 0;
break;
case SPEED_100 + FULL_DUPLEX:
e_dev_info("Forcing to 100 Mbps Full Duplex\n");
- adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.autoneg = 0;
+ adapter->fc_autoneg = 0;
+
adapter->hw.forced_speed_duplex = e1000_100_full;
adapter->hw.autoneg_advertised = 0;
break;
@@ -738,7 +786,9 @@ static void e1000_check_copper_options(struct
e1000_adapter *adapter)
full_duplex_only:
e_dev_info("Using Autonegotiation at 1000 Mbps Full Duplex "
"only\n");
- adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg = 1;
+ adapter->fc_autoneg = 1;
+
adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
break;
default:
@@ -746,7 +796,7 @@ full_duplex_only:
}
/* Speed, AutoNeg and MDI/MDI-X must all play nice */
- if (e1000_validate_mdi_setting(&(adapter->hw)) < 0) {
+ if (e1000_validate_mdi_setting(&adapter->hw) < 0) {
e_dev_info("Speed, AutoNeg and MDI-X specs are incompatible. "
"Setting MDI-X to a compatible value.\n");
}
--
1.9.1
From a80d62b8f2181d9bbada6646cd641fe084ebe225 Mon Sep 17 00:00:00 2001
From: Janusz Wolak <janusz...@gmail.com>
Date: Sun, 11 Oct 2015 17:08:54 +0200
Subject: [PATCH 6/6] Remove checkpatch errors, warnings, ckecks.
Signed-off-by: Janusz Wolak <janusz...@gmail.com>
---
drivers/net/ethernet/intel/e1000/e1000_osdep.h | 49
+++++++++++++-------------
1 file changed, 24 insertions(+), 25 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000/e1000_osdep.h
b/drivers/net/ethernet/intel/e1000/e1000_osdep.h
index 33e7c45a..aeb3b95 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_osdep.h
+++ b/drivers/net/ethernet/intel/e1000/e1000_osdep.h
@@ -1,5 +1,5 @@
/*******************************************************************************
-
+*
Intel PRO/1000 Linux driver
Copyright(c) 1999 - 2006 Intel Corporation.
@@ -26,7 +26,6 @@
*******************************************************************************/
-
/* glue for the OS independent part of e1000
* includes register access macros
*/
@@ -34,7 +33,7 @@
#ifndef _E1000_OSDEP_H_
#define _E1000_OSDEP_H_
-#include <asm/io.h>
+#include <linux/io.h>
#define CONFIG_RAM_BASE 0x60000
#define GBE_CONFIG_OFFSET 0x0
@@ -60,50 +59,50 @@
? E1000_##reg : E1000_82542_##reg))))
#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) ( \
- writel((value), ((a)->hw_addr + \
- (((a)->mac_type >= e1000_82543) ? E1000_##reg :
E1000_82542_##reg) + \
- ((offset) << 2))))
+ writel((value), ((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 2))))
#define E1000_READ_REG_ARRAY(a, reg, offset) ( \
- readl((a)->hw_addr + \
- (((a)->mac_type >= e1000_82543) ? E1000_##reg :
E1000_82542_##reg) + \
- ((offset) << 2)))
+ readl((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 2)))
#define E1000_READ_REG_ARRAY_DWORD E1000_READ_REG_ARRAY
#define E1000_WRITE_REG_ARRAY_DWORD E1000_WRITE_REG_ARRAY
#define E1000_WRITE_REG_ARRAY_WORD(a, reg, offset, value) ( \
- writew((value), ((a)->hw_addr + \
- (((a)->mac_type >= e1000_82543) ? E1000_##reg :
E1000_82542_##reg) + \
- ((offset) << 1))))
+ writew((value), ((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 1))))
#define E1000_READ_REG_ARRAY_WORD(a, reg, offset) ( \
- readw((a)->hw_addr + \
- (((a)->mac_type >= e1000_82543) ? E1000_##reg :
E1000_82542_##reg) + \
- ((offset) << 1)))
+ readw((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 1)))
#define E1000_WRITE_REG_ARRAY_BYTE(a, reg, offset, value) ( \
- writeb((value), ((a)->hw_addr + \
- (((a)->mac_type >= e1000_82543) ? E1000_##reg :
E1000_82542_##reg) + \
- (offset))))
+ writeb((value), ((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ (offset))))
#define E1000_READ_REG_ARRAY_BYTE(a, reg, offset) ( \
- readb((a)->hw_addr + \
- (((a)->mac_type >= e1000_82543) ? E1000_##reg :
E1000_82542_##reg) + \
- (offset)))
+ readb((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ (offset)))
#define E1000_WRITE_FLUSH() er32(STATUS)
#define E1000_WRITE_ICH_FLASH_REG(a, reg, value) ( \
- writel((value), ((a)->flash_address + reg)))
+ writel((value), ((a)->flash_address + reg)))
#define E1000_READ_ICH_FLASH_REG(a, reg) ( \
- readl((a)->flash_address + reg))
+ readl((a)->flash_address + reg))
#define E1000_WRITE_ICH_FLASH_REG16(a, reg, value) ( \
- writew((value), ((a)->flash_address + reg)))
+ writew((value), ((a)->flash_address + reg)))
#define E1000_READ_ICH_FLASH_REG16(a, reg) ( \
- readw((a)->flash_address + reg))
+ readw((a)->flash_address + reg))
#endif /* _E1000_OSDEP_H_ */
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
