Hello, I upgraded a machine from 3.14.x to v4.1.x and noted that I now have two kworker very often on D state, just after boot while I am not doing anything special. This issue remains indefinitely.
This machine has four network interfaces:
01:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection
(rev 01)
Subsystem: Inventec Corporation Device 004a
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at fbce0000 (32-bit, non-prefetchable) [size=128K]
Memory at fbcc0000 (32-bit, non-prefetchable) [size=128K]
I/O ports at cc00 [size=32]
Memory at fbc9c000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at fbca0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Capabilities: [70] MSI-X: Enable+ Count=10 Masked-
Capabilities: [a0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 00-26-6c-ff-ff-ff-af-71
Capabilities: [150] Alternative Routing-ID Interpretation (ARI)
Capabilities: [160] Single Root I/O Virtualization (SR-IOV)
Kernel driver in use: igb
01:00.1 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection
(rev 01)
Subsystem: Inventec Corporation Device 004a
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fbc20000 (32-bit, non-prefetchable) [size=128K]
Memory at fbc00000 (32-bit, non-prefetchable) [size=128K]
I/O ports at c880 [size=32]
Memory at fbbdc000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at fbbe0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Capabilities: [70] MSI-X: Enable+ Count=10 Masked-
Capabilities: [a0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 00-26-6c-ff-ff-ff-af-71
Capabilities: [150] Alternative Routing-ID Interpretation (ARI)
Capabilities: [160] Single Root I/O Virtualization (SR-IOV)
Kernel driver in use: igb
03:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+
Network Connection (rev 01)
Subsystem: Inventec Corporation Device 004c
Flags: bus master, fast devsel, latency 0, IRQ 56
Memory at fbdc0000 (64-bit, non-prefetchable) [size=256K]
I/O ports at dc00 [size=32]
Memory at fbd9c000 (64-bit, non-prefetchable) [size=16K]
Expansion ROM at fbda0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Capabilities: [70] MSI-X: Enable+ Count=64 Masked-
Capabilities: [a0] Express Endpoint, MSI 00
Capabilities: [e0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 00-8c-fa-ff-ff-01-cf-c2
Capabilities: [150] Alternative Routing-ID Interpretation (ARI)
Capabilities: [160] Single Root I/O Virtualization (SR-IOV)
Kernel driver in use: ixgbe
03:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+
Network Connection (rev 01)
Subsystem: Inventec Corporation Device 004c
Flags: bus master, fast devsel, latency 0, IRQ 82
Memory at fbd40000 (64-bit, non-prefetchable) [size=256K]
I/O ports at d880 [size=32]
Memory at fbd1c000 (64-bit, non-prefetchable) [size=16K]
Expansion ROM at fbd20000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Capabilities: [70] MSI-X: Enable+ Count=64 Masked-
Capabilities: [a0] Express Endpoint, MSI 00
Capabilities: [e0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 00-8c-fa-ff-ff-01-cf-c2
Capabilities: [150] Alternative Routing-ID Interpretation (ARI)
Capabilities: [160] Single Root I/O Virtualization (SR-IOV)
Kernel driver in use: ixgbe
The two ixgbe interfaces are not used (UP but no-carrier):
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc mq state UP group defa
link/ether 00:26:6c:ff:af:70 brd ff:ff:ff:ff:ff:ff
inet 10.5.5.58/24 brd 10.5.5.255 scope global eth0
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc mq state UP group defa
link/ether 00:26:6c:ff:af:71 brd ff:ff:ff:ff:ff:ff
4: eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group
link/ether 00:8c:fa:01:cf:c2 brd ff:ff:ff:ff:ff:ff
5: eth3: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group
link/ether 00:8c:fa:01:cf:c3 brd ff:ff:ff:ff:ff:ff
if I turn them down (ip link set dev eth{2,3} down); the problem
disappear, the two kworker in D disapper as well.
Since I consider this as a regression because I only change the kernel
version, I did a bisection in order to localize the issue.
What I got at the end is: (bisected between v3.14.x and v4.1.x)
# first bad commit: [d9cd46cd391a132a43cbde7bdac12c16284b618f] ixgbe: fix
detection of SFP+ capable interfaces
After some tests, I reverted the only part present in ixgbe_main:
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -4786,8 +4786,6 @@
case ixgbe_phy_qsfp_active_unknown:
case ixgbe_phy_qsfp_intel:
case ixgbe_phy_qsfp_unknown:
- /* ixgbe_phy_none is set when no SFP module is present */
- case ixgbe_phy_none:
return true;
case ixgbe_phy_nl:
if (hw->mac.type == ixgbe_mac_82598EB)
It also fixes my issue: even if eth{2,3} are still up with no carrier, I
don't have any kworker in D state.
So, is it something we should consider as a regression, in that case I
can send a formal patch, or do you need some more information to help
you debug it?
Thanks,
--
William
signature.asc
Description: PGP signature
