From: Mark Rustad <mark.d.rus...@intel.com>
This patch removes KR PHY reset from ixgbe_init_phy_ops_x550em,
since this function is meant to initialize function pointers for
the detected PHY type. Internal PHY reset was moved to
ixgbe_setup_internal_phy_t_x550em which will now detect which
mode the internal PHY operates in and set it up as required.
Signed-off-by: Mark Rustad <mark.d.rus...@intel.com>
Tested-by: Darin Miller <darin.j.mil...@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirs...@intel.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 21 ++++++++-------------
1 file changed, 8 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index bf2ae8d..a9c73b7 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -1727,6 +1727,12 @@ static s32 ixgbe_setup_internal_phy_t_x550em(struct
ixgbe_hw *hw)
if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
return IXGBE_ERR_CONFIG;
+ if (hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE) {
+ speed = IXGBE_LINK_SPEED_10GB_FULL |
+ IXGBE_LINK_SPEED_1GB_FULL;
+ return ixgbe_setup_kr_speed_x550em(hw, speed);
+ }
+
/* If link is not up, then there is no setup necessary so return */
status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
if (status)
@@ -1931,7 +1937,6 @@ static s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
{
struct ixgbe_phy_info *phy = &hw->phy;
- ixgbe_link_speed speed;
s32 ret_val;
hw->mac.ops.set_lan_id(hw);
@@ -1944,10 +1949,6 @@ static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
* to determine internal PHY mode.
*/
phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL);
- if (phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE) {
- speed = IXGBE_LINK_SPEED_10GB_FULL |
- IXGBE_LINK_SPEED_1GB_FULL;
- }
}
/* Identify the PHY or SFP module */
@@ -1979,14 +1980,8 @@ static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
/* If internal link mode is XFI, then setup iXFI internal link,
* else setup KR now.
*/
- if (!(phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
- phy->ops.setup_internal_link =
- ixgbe_setup_internal_phy_t_x550em;
- } else {
- speed = IXGBE_LINK_SPEED_10GB_FULL |
- IXGBE_LINK_SPEED_1GB_FULL;
- ret_val = ixgbe_setup_kr_speed_x550em(hw, speed);
- }
+ phy->ops.setup_internal_link =
+ ixgbe_setup_internal_phy_t_x550em;
/* setup SW LPLU only for first revision */
if (!(IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw,
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
