From: Emil Tantilov <emil.s.tanti...@intel.com> Some X550 devices can connect at 2.5Gbps during fail-over, but only with certain link partners. Also setting the advertised speed will not work so we do not report it as supported to avoid confusion.
Signed-off-by: Emil Tantilov <emil.s.tanti...@intel.com> Tested-by: Phil Schmitt <phillip.j.schm...@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirs...@intel.com> --- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index d681273..1ed4c9a 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -166,8 +166,6 @@ static int ixgbe_get_settings(struct net_device *netdev, /* set the supported link speeds */ if (supported_link & IXGBE_LINK_SPEED_10GB_FULL) ecmd->supported |= SUPPORTED_10000baseT_Full; - if (supported_link & IXGBE_LINK_SPEED_2_5GB_FULL) - ecmd->supported |= SUPPORTED_2500baseX_Full; if (supported_link & IXGBE_LINK_SPEED_1GB_FULL) ecmd->supported |= SUPPORTED_1000baseT_Full; if (supported_link & IXGBE_LINK_SPEED_100_FULL) @@ -179,8 +177,6 @@ static int ixgbe_get_settings(struct net_device *netdev, ecmd->advertising |= ADVERTISED_100baseT_Full; if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) ecmd->advertising |= ADVERTISED_10000baseT_Full; - if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_2_5GB_FULL) - ecmd->advertising |= ADVERTISED_2500baseX_Full; if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) ecmd->advertising |= ADVERTISED_1000baseT_Full; } else { -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html