> -----Ursprüngliche Nachricht----- > Von: Florian Fainelli [mailto:f.faine...@gmail.com] > Gesendet: Montag, 21. Dezember 2015 20:51 > An: Roosen Henri; david.da...@cavium.com > Cc: buyt...@wantstofly.org; grant.lik...@secretlab.ca; > da...@davemloft.net; netdev@vger.kernel.org; Andrew Lunn > Betreff: Re: Commit-8b63ec18 breaks setting PHY pad-skew settings > > On 21/12/15 02:40, Roosen Henri wrote: > > Hi David, > > > > Unfortunately Linux kernel commit- > 8b63ec1837fa4c1ea604b278d201454eb3b85066 breaks setting pad-skew > settings for Micrel PHY's. > > > > Please see Documentation/devicetree/bindings/net/micrel-ksz90x1.txt: at > the examples, it proposes to do PHY pad skew settings at the Ethernet > device for autodetected PHY's. > > > > Multiple boards are using this at the devicetree files: see imx6qdl- > nitrogen6x.dtsi, imx6qdl-sabrelite.dtsi, socfpga_arria5_socdk.dts, > socfpga_cyclone5_socdk.dts and socfpga_cyclone5_sockit.dts. But of course > there might be more users depending on this than the ones which have an > in-kernel dts file. > > > > The micrel.c file searches for the parent of its OpenFirmware node for the > skew settings: see ksz9031_config_init(): of_node = dev->parent->of_node; > I don't think that was a clean implementation to start with.. But for sure > it's > incompatible with commit-8b63ec18, because the node of the Ethernet > device which has the settings is not found anymore. > > > > I'm not sure who to put on the copy list to discuss a proper solution, so > > feel > free to get these persons and lists in the loop. > > Usually, the best thing is to reply on the mailing-list directive, so more > people > can jump in.
Thanks Florian for your reply and getting the mailing-list into the loop! > > This particular issue is fixed with the following commit: > > http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=651 > df2183543bc92f5dbcf99cd9e236ead0bc4c5 Unfortunately the patch is incomplete: it only fixes the issue for the KSZ9021. Please have a look at the funcion ksz9031_config_init() which has the the same (broken) search for the parent node. As both the code for KSZ9021 as well as the code for KSZ9031 parse the same pad skew settings from the OF node (and to prevent incomplete fixes in the future), I think this code is a candidate to be cleaned up. Or is cooking up a similar patch for the KSZ9031 as for the KSZ9021 preferred? Additionally, if this is a deprecated feature (like the commit states), then the devicetree binding documentation (Documentation/devicetree/bindings/net/micrel-ksz90x1.txt) should be updated. At least the deprecated example for autodetected PHY's should be corrected/removed. -- Henri > -- > Florian ________________________________ Ginzinger electronic systems GmbH Gewerbegebiet Pirath 16 4952 Weng im Innkreis www.ginzinger.com Firmenbuchnummer: FN 364958d Firmenbuchgericht: Ried im Innkreis UID-Nr.: ATU66521089 ________________________________ *** WEIHNACHTSURLAUB VON DONNERSTAG, DEN 24. DEZEMBER 2015 BIS MITTWOCH, DEN 6. JAENNER 2016 *** *** CHRISTMAS VACATION FROM THURSDAY, THE 24 DECEMBER 2015 TO WEDNESDAY, 6 JANUARY 2016 *** N�����r��y����b�X��ǧv�^�){.n�+���z�^�)����w* jg��� �����ݢj/���z�ޖ��2�ޙ����&�)ߡ�a���� �G���h��j:+v���w��٥
