The Intel i211 LOM pcie ethernet controllers' iNVM operates as an OTP
and has no externel EEPROM interface [1]. The following allows the
driver to pickup the MAC address from a device tree blob when CONFIG_OF
has been enabled.
[1]
http://www.intel.com/content/www/us/en/embedded/products/networking/i211-ethernet-controller-datasheet.html
Signed-off-by: John Holland <jotih...@gmail.com>
---
drivers/net/ethernet/intel/igb/igb_main.c | 30
++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c
b/drivers/net/ethernet/intel/igb/igb_main.c
index 31e5f39..9c92443 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -56,6 +56,11 @@
#include <linux/i2c.h>
#include "igb.h"
+#ifdef defined(CONFIG_OF)
+#include <linux/of_net.h>
+#include <linux/etherdevice.h>
+#endif
+
#define MAJ 5
#define MIN 3
#define BUILD 0
@@ -2217,6 +2222,26 @@ static s32 igb_init_i2c(struct igb_adapter *adapter)
}
/**
+ * igb_read_mac_addr_dts - Read mac addres from the device tree blob.
+ * @hw: pointer to the e1000 hardware structure
+ **/
+#ifdef defined(CONFIG_OF)
+static void igb_read_mac_addr_dts(struct e1000_hw *hw)
+{
+ const u8 *mac;
+ struct device_node *dn;
+
+ dn = of_find_compatible_node(NULL, NULL, "intel,i211");
+ if (!dn)
+ return;
+
+ mac = of_get_mac_address(dn);
+ if (mac)
+ ether_addr_copy(hw->mac.addr, mac);
+}
+#endif
+
+/**
* igb_probe - Device Initialization Routine
* @pdev: PCI device information struct
* @ent: entry in igb_pci_tbl
@@ -2420,6 +2445,11 @@ static int igb_probe(struct pci_dev *pdev, const
struct pci_device_id *ent)
if (hw->mac.ops.read_mac_addr(hw))
dev_err(&pdev->dev, "NVM Read Error\n");
+#ifdef defined(CONFIG_OF)
+ if (!is_valid_ether_addr(hw->mac.addr))
+ igb_read_mac_addr_dts(hw);
+#endif
+
memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len);
if (!is_valid_ether_addr(netdev->dev_addr)) {
