Sat, Jan 30, 2016 at 07:59:24AM CET, da...@davemloft.net wrote: >From: Nikolay Aleksandrov <niko...@cumulusnetworks.com> >Date: Fri, 29 Jan 2016 22:48:26 +0100 > >> On 01/29/2016 10:45 PM, Jay Vosburgh wrote: >>> Nikolay Aleksandrov <niko...@cumulusnetworks.com> wrote: >>> >>>> On 01/25/2016 05:24 PM, Bjørnar Ness wrote: >>>>> As subject says, 802.3ad bonding is not working with virtio network model. >>>>> >>>>> The only errors I see is: >>>>> >>>>> No 802.3ad response from the link partner for any adapters in the bond. >>>>> >>>>> Dumping the network traffic shows that no LACP packets are sent from the >>>>> host running with virtio driver, changing to for example e1000 solves >>>>> this problem >>>>> with no configuration changes. >>>>> >>>>> Is this a known problem? >>>>> >>>> [Including bonding maintainers for comments] >>>> >>>> Hi, >>>> Here's a workaround patch for virtio_net devices that "cheats" the >>>> duplex test (which is the actual problem). I've tested this locally >>>> and it works for me. >>>> I'd let the others comment on the implementation, there're other signs >>>> that can be used to distinguish a virtio_net device so I'm open to >>>> suggestions. >>>> Also feedback if this is at all acceptable would be appreciated. >>> >>> Should virtio instead provide an arbitrary speed and full duplex >>> to ethtool, as veth does? >>> >>> Creating a magic whitelist of devices deep inside the 802.3ad >>> implementation seems less desirable. >>> >> TBH, I absolutely agree. In fact here's what we've been doing: >> add set_settings which allows the user to set any speed/duplex >> and get_settings of course to retrieve that. This is also useful >> for testing other stuff that requires speed and duplex, not only >> for the bonding case. > >I also agree. Having a whitelist is just rediculous. > >There should be a default speed/duplex setting for such devices as well. >We can pick one that will be use universally for these kinds of devices.
Exposing made up speed for veth and virtio_net sounds odd to me. User see 10000Mb/s but it makes no sense at all. It is just confusing. I believe this is bonding bug and should be fixed in there. Team works fine with virtio_net device and lacp runner.