Hi Alex,
On 02/23/2016 04:10 PM, Alexandre TORGUE wrote:
STM32F429 Chip embeds a Synopsys 3.50a MAC IP.
This series:
-enhance current stmmac driver to control it (code already
available) and adds basic glue for STM32F429 chip.
-Enable basic Net config in kernel.
Note that DT patches are not present because STM32 pinctrl code is not
yet avalaible.
Changes since v1:
-Fix Kbuild issue in Kconfig.
-Remove init/exit callbacks. Suspend/Resume and remove driver is no more
driven in stmmac_pltfr but directly in dwmac-stm32 glue driver.
-Take into account Joachim review.
Regards.
Alexandre.
Alexandre TORGUE (4):
net: ethernet: dwmac: add Ethernet glue logic for stm32 chip
Documentation: Bindings: Add STM32 DWMAC glue
net: ethernet: stmmac: add support of Synopsys 3.50a MAC IP
ARM: STM32: Enable Ethernet in stm32_defconfig
.../devicetree/bindings/net/stm32-dwmac.txt | 41 ++++
arch/arm/configs/stm32_defconfig | 9 +
drivers/net/ethernet/stmicro/stmmac/Kconfig | 12 ++
drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c | 208 +++++++++++++++++++++
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 +
6 files changed, 272 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt
create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
You can add my:
Tested-by: Maxime Coquelin <maxime.coque...@st.com>
Thanks!
Maxime
