--- Begin Message ---
I haven't looked at a MS switch, but in general, looking at Meraki MX and
MR are terrible for any traditional monitoring. Their snmp capabilities
are (purposefully) crippled to hide much of any real usable metrics outside
if IFMIB status and sysinfo, so mostly useless to netdisco or any
SNMP-based tools. Cisco/Meraki is pushing everyone to use API mostly, and
hiding real performance behind composite metrics for "total utilization",
so is a whole other bag of worms.
I've already given up on Meraki, cursed their names, and the poor bastard
customer I have for using them. Funny part is the customer pays the long
LONG dollar for HP NNM, and can't even pay HP enough to figure out what to
do with meraki, leaving them largely blind to their 1200 store retail
chain. Thank Cisco for hobbling a perfectly normal linux box to hide
performance metrics and topology data so you never know when your box will
tip over! Sadly I know as even their largest mx router tips over under
load at less than 10% of reported vpn/throughput capacity, and I don't
usually know until the noc starts blowing up.
I told the customer if they want proper reporting to get some real network
kit, not this cisco-lite crap.
-mb
On Mon, Sep 12, 2022 at 2:22 AM Oliver Gorwits <oli...@cpan.org> wrote:
> Hi Daniel
>
> Please can you describe what is missing in Netdisco that you expect to see?
>
> I can see in the logs that 30 interfaces were added, but possibly no
> VLANs. Is that it, or something else?
>
> Also you have the option to share a snapshot of the device with me as
> here: https://github.com/netdisco/netdisco/wiki/Snapshot
> but I'm a bit busy right now so may take a while to get around to it. Will
> be most useful to know what you want to see.
>
> thanks and regards,
> Oliver.
>
> On Mon, 12 Sept 2022 at 09:34, Meier, Daniel via netdisco-users <
> netdisco-users@lists.sourceforge.net> wrote:
>
>> Dear Netdisco Users
>>
>>
>>
>> Hope that someone with experience can assist me.
>>
>>
>>
>> First Meraki switch in the network and trouble to get data from it.
>> Latest version of netdisco on use (App 2.55.1, SNMP::Info 3.89, DB Schema
>> 75, PostresSQL 12.00.12, Perl 5.30.0, Ubuntu 20.04)
>>
>>
>>
>> I’m able to connect with snmpv2 and get the sysuptime from the meraki
>> switch with snmpcheck.exe from prtg.
>>
>>
>>
>> When using SHOW_COMMUNITY=1 ~/bin/netdisco-do discover -d 10.75.138.51
>> –DIQ I got the following output.
>>
>>
>>
>> I don't like this line at all: Device doesn't implement sysServices but
>> did return sysDescr. Might give unexpected results.
>>
>>
>>
>> netdisco@CHJUVM012:/root$ SHOW_COMMUNITY=1 ~/bin/netdisco-do discover -d
>> 10.75.138.51 -DIQ
>>
>> [197773] 2022-09-12 07:22:54 info App::Netdisco version 2.055001 loaded.
>>
>> SELECT me.version, me.installed
>>
>> FROM dbix_class_schema_versions me
>>
>> WHERE 1 = 0
>>
>> SELECT me.version
>>
>> FROM dbix_class_schema_versions me
>>
>> ORDER BY installed DESC
>>
>> LIMIT '1'
>>
>> SELECT me.ip, me.alias, me.subnet, me.port, me.dns, me.creation
>>
>> FROM device_ip me
>>
>> WHERE me.alias = '10.75.138.51' AND me.ip = '10.75.138.51'
>>
>> SELECT me.ip, me.creation, me.dns, me.description, me.uptime, me.contact,
>> me.name, me.location, me.layers, me.num_ports, me.mac, me.serial,
>> me.chassis_id, me.model, me.ps1_type, me.ps2_type, me.ps1_status,
>> me.ps2_status, me.fan, me.slots, me.vendor, me.os, me.os_ver, me.log,
>> me.snmp_ver, me.snmp_comm, me.snmp_class, me.snmp_engineid, me.vtp_domain,
>> me.last_discover, me.last_macsuck, me.last_arpnip, me.is_pseudo, to_char(
>> me.creation, 'YYYY-MM-DD HH24:MI' ), to_char( me.last_arpnip, 'YYYY-MM-DD
>> HH24:MI' ), to_char( me.last_discover, 'YYYY-MM-DD HH24:MI' ), to_char(
>> me.last_macsuck, 'YYYY-MM-DD HH24:MI' ), extract( epoch
>>
>> FROM age( now( ), me.creation ) ), extract( epoch
>>
>> FROM age( now( ), me.last_arpnip ) ), extract( epoch
>>
>> FROM age( now( ), me.last_discover ) ), extract( epoch
>>
>> FROM age( now( ), me.last_macsuck ) ), replace( age( timestamp
>> 'epoch' + me.uptime / 100 * interval '1 second', timestamp '1970-01-01
>> 00:00:00-00' ) ::text, 'mon', 'month' )
>>
>> FROM device me
>>
>> WHERE me.ip = '10.75.138.51'
>>
>> [197773] 2022-09-12 07:22:55 info discover: [10.75.138.51] started at
>> Mon Sep 12 09:22:55 2022
>>
>> [197773] 2022-09-12 07:22:55 debug discover: running with timeout 600s
>>
>> [197773] 2022-09-12 07:22:55 debug => running workers for phase: check
>>
>> [197773] 2022-09-12 07:22:55 debug -> run worker check/_base_/0
>>
>> [197773] 2022-09-12 07:22:55 debug Discover is able to run.
>>
>> [197773] 2022-09-12 07:22:55 debug => running workers for phase: early
>>
>> [197773] 2022-09-12 07:22:55 debug -> run worker early/properties/100
>>
>> [197773] 2022-09-12 07:22:55 debug snmp reader cache warm: [10.75.138.51]
>>
>> SELECT me.ip, me.snmp_comm_rw, me.snmp_auth_tag_read,
>> me.snmp_auth_tag_write
>>
>> FROM community me
>>
>> WHERE me.ip = '10.75.138.51'
>>
>> UPDATE community
>>
>> SET snmp_auth_tag_read = NULL
>>
>> WHERE ip = '10.75.138.51'
>>
>> [197773] 2022-09-12 07:22:55 debug [10.75.138.51:161] try_connect with
>> ver: 2, class: SNMP::Info, comm: infodeletedbyme….
>>
>> SNMP::Info::_global uptime : DISMAN-EVENT-MIB::sysUpTimeInstance :
>> .1.3.6.1.2.1.1.3.0
>>
>> SNMP::Info::_global layers : SNMPv2-MIB::sysServices.0 :
>> .1.3.6.1.2.1.1.7.0
>>
>> SNMP::Info::_global(layers) NOSUCHOBJECT at
>> /home/netdisco/perl5/lib/perl5/App/Netdisco/Transport/SNMP.pm line 263.
>>
>> SNMP::Info::_global description : SNMPv2-MIB::sysDescr.0 :
>> .1.3.6.1.2.1.1.1.0
>>
>> SELECT me.ip, me.snmp_comm_rw, me.snmp_auth_tag_read,
>> me.snmp_auth_tag_write
>>
>> FROM community me
>>
>> WHERE me.ip = '10.75.138.51'
>>
>> UPDATE community
>>
>> SET snmp_auth_tag_read = 'Meraki Switches'
>>
>> WHERE ip = '10.75.138.51'
>>
>> Device doesn't implement sysServices but did return sysDescr. Might give
>> unexpected results.
>>
>> at /home/netdisco/perl5/lib/perl5/App/Netdisco/Transport/SNMP.pm line 241.
>>
>> SNMP::Info::_global id : SNMPv2-MIB::sysObjectID.0 : .1.3.6.1.2.1.1.2.0
>>
>> SNMP::Info 3.89
>>
>> SNMP::Info::device_type() layers:00000000 id:29671 sysDescr:"Meraki
>> MS210-24P Cloud Managed PoE Switch"
>>
>> SNMP::Info::_validate_autoload_method(vtp_d_name) Unable to resolve
>> method.
>>
>> SNMP::Info::_global name : SNMPv2-MIB::sysName.0 : .1.3.6.1.2.1.1.5.0
>>
>> SNMP::Info::_validate_autoload_method(mac) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(ps1_type) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(ps2_type) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(ps1_status) Unable to resolve
>> method.
>>
>> SNMP::Info::_validate_autoload_method(ps2_status) Unable to resolve
>> method.
>>
>> SNMP::Info::_validate_autoload_method(fan) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(slots) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(vendor) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(os) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(os_ver) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(model) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(serial) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(serial1) Unable to resolve method.
>>
>> SNMP::Info::_global contact : SNMPv2-MIB::sysContact.0 :
>> .1.3.6.1.2.1.1.4.0
>>
>> SNMP::Info::_global(contact) NOSUCHOBJECT at
>> /home/netdisco/perl5/lib/perl5/App/Netdisco/Worker/Plugin/Discover/Properties.pm
>> line 54.
>>
>> SNMP::Info::_global location : SNMPv2-MIB::sysLocation.0 :
>> .1.3.6.1.2.1.1.6.0
>>
>> SNMP::Info::_global ports : IF-MIB::ifNumber.0 : .1.3.6.1.2.1.2.1.0
>>
>> SNMP::Info::_global snmpEngineID : SNMP-FRAMEWORK-MIB::snmpEngineID.0 :
>> .1.3.6.1.6.3.10.2.1.1.0
>>
>> SNMP::Info::_global(snmpEngineID) NOSUCHOBJECT at
>> /home/netdisco/perl5/lib/perl5/App/Netdisco/Worker/Plugin/Discover/Properties.pm
>> line 59.
>>
>> BEGIN WORK
>>
>> UPDATE device
>>
>> SET last_discover = now( ), uptime = '42620235'
>>
>> WHERE ip = '10.75.138.51'
>>
>> COMMIT
>>
>> [197773] 2022-09-12 07:22:57 debug -> run worker early/properties/100
>>
>> SELECT me.ip, me.alias, me.subnet, me.port, me.dns, me.creation
>>
>> FROM device_ip me
>>
>> WHERE me.alias = '10.75.138.51' AND me.ip = '10.75.138.51'
>>
>> SELECT me.ip, me.creation, me.dns, me.description, me.uptime, me.contact,
>> me.name, me.location, me.layers, me.num_ports, me.mac, me.serial,
>> me.chassis_id, me.model, me.ps1_type, me.ps2_type, me.ps1_status,
>> me.ps2_status, me.fan, me.slots, me.vendor, me.os, me.os_ver, me.log,
>> me.snmp_ver, me.snmp_comm, me.snmp_class, me.snmp_engineid, me.vtp_domain,
>> me.last_discover, me.last_macsuck, me.last_arpnip, me.is_pseudo, to_char(
>> me.creation, 'YYYY-MM-DD HH24:MI' ), to_char( me.last_arpnip, 'YYYY-MM-DD
>> HH24:MI' ), to_char( me.last_discover, 'YYYY-MM-DD HH24:MI' ), to_char(
>> me.last_macsuck, 'YYYY-MM-DD HH24:MI' ), extract( epoch
>>
>> FROM age( now( ), me.creation ) ), extract( epoch
>>
>> FROM age( now( ), me.last_arpnip ) ), extract( epoch
>>
>> FROM age( now( ), me.last_discover ) ), extract( epoch
>>
>> FROM age( now( ), me.last_macsuck ) ), replace( age( timestamp
>> 'epoch' + me.uptime / 100 * interval '1 second', timestamp '1970-01-01
>> 00:00:00-00' ) ::text, 'mon', 'month' )
>>
>> FROM device me
>>
>> WHERE me.ip = '10.75.138.51'
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] device - OK to
>> continue discover
>>
>> [197773] 2022-09-12 07:22:57 debug -> run worker early/properties/100
>>
>> SNMP::Info::_load_attr interfaces : IF-MIB::ifIndex : .1.3.6.1.2.1.2.2.1.1
>>
>> SELECT me.ip, me.port, me.creation, me.descr, me.up, me.up_admin,
>> me.type, me.duplex, me.duplex_admin, me.speed, me.speed_admin, me.name,
>> me.mac, me.mtu, me.stp, me.remote_ip, me.remote_port, me.remote_type,
>> me.remote_id, me.has_subinterfaces, me.is_master, me.slave_of,
>> me.manual_topo, me.is_uplink, me.vlan, me.pvid, me.lastchange,
>> properties.ip, properties.port, properties.error_disable_cause,
>> properties.remote_is_discoverable, properties.remote_is_wap,
>> properties.remote_is_phone, properties.remote_vendor,
>> properties.remote_model, properties.remote_os_ver,
>> properties.remote_serial, properties.remote_dns, properties.raw_speed,
>> properties.faststart, properties.ifindex
>>
>> FROM device_port me
>>
>> LEFT JOIN device_port_properties properties
>>
>> ON properties.ip = me.ip AND properties.port = me.port
>>
>> WHERE me.ip = '10.75.138.51'
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] device - OK to
>> continue discover
>>
>> [197773] 2022-09-12 07:22:57 debug -> run worker early/properties/100
>>
>> SNMP::Info::_load_attr old_ip_index : IP-MIB::ipAdEntIfIndex :
>> .1.3.6.1.2.1.4.20.1.2
>>
>> SNMP::Info::_load_attr new_ip_index : IP-MIB::ipAddressIfIndex :
>> .1.3.6.1.2.1.4.34.1.3
>>
>> SNMP::Info::_load_attr new_ip_type : IP-MIB::ipAddressType :
>> .1.3.6.1.2.1.4.34.1.4
>>
>> SNMP::Info::_load_attr old_ip_netmask : IP-MIB::ipAdEntNetMask :
>> .1.3.6.1.2.1.4.20.1.3
>>
>> SNMP::Info::_load_attr new_ip_prefix : IP-MIB::ipAddressPrefix :
>> .1.3.6.1.2.1.4.34.1.5
>>
>> SNMP::Info::_load_attr new_ip_type : IP-MIB::ipAddressType :
>> .1.3.6.1.2.1.4.34.1.4
>>
>> SNMP::Info::_validate_autoload_method(ipv6_index) Unable to resolve
>> method.
>>
>> SNMP::Info::_validate_autoload_method(ipv6_addr) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(ipv6_type) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(ipv6_addr_prefixlength) Unable to
>> resolve method.
>>
>> [197773] 2022-09-12 07:22:57 debug resolving 0 aliases with max 50
>> outstanding requests
>>
>> BEGIN WORK
>>
>> DELETE FROM device_ip
>>
>> WHERE ip = '10.75.138.51'
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] device - removed 1
>> aliases
>>
>> SAVEPOINT savepoint_0
>>
>> INSERT INTO device_ip( alias, dns, ip )
>>
>> VALUES( ?, ?, ? ) : '__BULK_INSERT__'
>>
>> RELEASE SAVEPOINT savepoint_0
>>
>> COMMIT
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] aliases - added 1 new
>> aliases
>>
>> [197773] 2022-09-12 07:22:57 debug -> run worker early/properties/100
>>
>> SNMP::Info::_load_attr i_type : IF-MIB::ifType : .1.3.6.1.2.1.2.2.1.3
>>
>> SNMP::Info::_validate_autoload_method(i_ignore) Unable to resolve method.
>>
>> SNMP::Info::_load_attr i_description : IF-MIB::ifDescr :
>> .1.3.6.1.2.1.2.2.1.2
>>
>> SNMP::Info::_load_attr i_mtu : IF-MIB::ifMtu : .1.3.6.1.2.1.2.2.1.4
>>
>> SNMP::Info::_load_attr orig_i_speed : IF-MIB::ifSpeed :
>> .1.3.6.1.2.1.2.2.1.5
>>
>> SNMP::Info::_load_attr i_speed_high : IF-MIB::ifHighSpeed :
>> .1.3.6.1.2.1.31.1.1.1.15
>>
>> SNMP::Info::_validate_autoload_method(i_speed_admin) Unable to resolve
>> method.
>>
>> SNMP::Info::_load_attr i_mac : IF-MIB::ifPhysAddress :
>> .1.3.6.1.2.1.2.2.1.6
>>
>> SNMP::Info::_load_attr i_up : IF-MIB::ifOperStatus : .1.3.6.1.2.1.2.2.1.8
>>
>> SNMP::Info::_load_attr i_up_admin : IF-MIB::ifAdminStatus :
>> .1.3.6.1.2.1.2.2.1.7
>>
>> SNMP::Info::_load_attr i_name : IF-MIB::ifName : .1.3.6.1.2.1.31.1.1.1.1
>>
>> SNMP::Info::_validate_autoload_method(i_duplex) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(i_duplex_admin) Unable to resolve
>> method.
>>
>> SNMP::Info::_validate_autoload_method(i_stp_state) Unable to resolve
>> method.
>>
>> SNMP::Info::_validate_autoload_method(i_vlan) Unable to resolve method.
>>
>> SNMP::Info::_load_attr i_lastchange : IF-MIB::ifLastChange :
>> .1.3.6.1.2.1.2.2.1.9
>>
>> SNMP::Info::_validate_autoload_method(agg_ports) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(i_subinterfaces) Unable to resolve
>> method.
>>
>> SNMP::Info::_global load_uptime : DISMAN-EVENT-MIB::sysUpTimeInstance :
>> .1.3.6.1.2.1.1.3.0
>>
>> SNMP::Info::_global snmpEngineTime : SNMP-FRAMEWORK-MIB::snmpEngineTime.0
>> : .1.3.6.1.6.3.10.2.1.3.0
>>
>> SNMP::Info::_global(snmpEngineTime) NOSUCHOBJECT at
>> /home/netdisco/perl5/lib/perl5/App/Netdisco/Worker/Plugin/Discover/Properties.pm
>> line 215.
>>
>> BEGIN WORK
>>
>> DELETE FROM device_port_power
>>
>> WHERE ip IN (
>>
>> SELECT me.ip
>>
>> FROM device_port me
>>
>> WHERE me.ip = '10.75.138.51'
>>
>> )
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] db/ports - removed 0
>> port entries from DevicePortPower
>>
>> DELETE FROM device_port_properties
>>
>> WHERE ip IN (
>>
>> SELECT me.ip
>>
>> FROM device_port me
>>
>> WHERE me.ip = '10.75.138.51'
>>
>> )
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] db/ports - removed 30
>> port entries from DevicePortProperties
>>
>> DELETE FROM device_port_ssid
>>
>> WHERE ip IN (
>>
>> SELECT me.ip
>>
>> FROM device_port me
>>
>> WHERE me.ip = '10.75.138.51'
>>
>> )
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] db/ports - removed 0
>> port entries from DevicePortSsid
>>
>> DELETE FROM device_port_vlan
>>
>> WHERE ip IN (
>>
>> SELECT me.ip
>>
>> FROM device_port me
>>
>> WHERE me.ip = '10.75.138.51'
>>
>> )
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] db/ports - removed 0
>> port entries from DevicePortVlan
>>
>> DELETE FROM device_port_wireless
>>
>> WHERE ip IN (
>>
>> SELECT me.ip
>>
>> FROM device_port me
>>
>> WHERE me.ip = '10.75.138.51'
>>
>> )
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] db/ports - removed 0
>> port entries from DevicePortWireless
>>
>> DELETE FROM device_port
>>
>> WHERE ip = '10.75.138.51'
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] interfaces - removed
>> 30 interfaces
>>
>> SAVEPOINT savepoint_0
>>
>> INSERT INTO device_port( descr, duplex, duplex_admin, has_subinterfaces,
>> ip, is_master, lastchange, mac, mtu, name, port, pvid, slave_of, speed,
>> speed_admin, stp, type, up, up_admin, vlan )
>>
>> VALUES( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ? ) :
>> '__BULK_INSERT__'
>>
>> RELEASE SAVEPOINT savepoint_0
>>
>> COMMIT
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] interfaces - added 30
>> new interfaces
>>
>> [197773] 2022-09-12 07:22:57 debug => running workers for phase: main
>>
>> [197773] 2022-09-12 07:22:57 debug -> run worker main/canonicalip/100
>>
>> [197773] 2022-09-12 07:22:57 debug -> run worker main/entities/100
>>
>> SNMP::Info::_validate_autoload_method(e_index) Unable to resolve method.
>>
>> BEGIN WORK
>>
>> DELETE FROM device_module
>>
>> WHERE ip = '10.75.138.51'
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] modules - removed 1
>> chassis modules
>>
>> SELECT me.ip, me.index, me.description, me.type, me.parent, me.name,
>> me.class, me.pos, me.hw_ver, me.fw_ver, me.sw_ver, me.serial, me.model,
>> me.fru, me.creation, me.last_discover
>>
>> FROM device_module me
>>
>> WHERE me.index = '1' AND me.ip = '10.75.138.51'
>>
>> INSERT INTO device_module( class, fru, index, ip, last_discover, model,
>> name, parent, pos, serial, sw_ver )
>>
>> VALUES( 'chassis', false, '1', '10.75.138.51', now( ), '', 'chassis',
>> '0', '-1', '', NULL )
>>
>> COMMIT
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] modules - 0 chassis
>> components (added one pseudo for chassis)
>>
>> [197773] 2022-09-12 07:22:57 debug -> run worker main/neighbors/100
>>
>> BEGIN WORK
>>
>> UPDATE device_port
>>
>> SET manual_topo = false
>>
>> WHERE ip = '10.75.138.51'
>>
>> DELETE FROM topology
>>
>> WHERE ( dev1 = '10.75.138.51' AND port1 NOT IN (
>>
>> SELECT me.port
>>
>> FROM device_port me
>>
>> WHERE me.ip = '10.75.138.51'
>>
>> ) ) OR ( dev2 = '10.75.138.51' AND port2 NOT IN (
>>
>> SELECT me.port
>>
>> FROM device_port me
>>
>> WHERE me.ip = '10.75.138.51'
>>
>> ) )
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] neigh - removed 0
>> outdated manual topology links
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] neigh - setting manual
>> topology links
>>
>> SELECT me.dev1, me.port1, me.dev2, me.port2
>>
>> FROM topology me
>>
>> WHERE dev1 = '10.75.138.51' OR dev2 = '10.75.138.51'
>>
>> COMMIT
>>
>> SNMP::Info::_validate_autoload_method(hasLLDP) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(hasCDP) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(hasSONMP) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(hasFDP) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(hasEDP) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(hasAMAP) Unable to resolve method.
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] neigh - neighbor
>> protocols are not enabled
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] neigh - processed 0
>> neighbors
>>
>> [197773] 2022-09-12 07:22:57 debug -> run worker main/neighbors/100
>>
>> SNMP::Info::_validate_autoload_method(docs_if_cmts_cm_status_inet_address)
>> Unable to resolve method.
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] neigh - no modems
>> (probably not a DOCSIS device)
>>
>> [197773] 2022-09-12 07:22:57 debug -> run worker main/neighbors/100
>>
>> [197773] 2022-09-12 07:22:57 debug -> run worker main/portpower/100
>>
>> SNMP::Info::_validate_autoload_method(peth_power_watts) Unable to resolve
>> method.
>>
>> SNMP::Info::_validate_autoload_method(peth_power_status) Unable to
>> resolve method.
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] power - 0 power modules
>>
>> [197773] 2022-09-12 07:22:57 debug -> run worker main/portproperties/100
>>
>> SELECT me.ip, me.port, me.creation, me.descr, me.up, me.up_admin,
>> me.type, me.duplex, me.duplex_admin, me.speed, me.speed_admin, me.name,
>> me.mac, me.mtu, me.stp, me.remote_ip, me.remote_port, me.remote_type,
>> me.remote_id, me.has_subinterfaces, me.is_master, me.slave_of,
>> me.manual_topo, me.is_uplink, me.vlan, me.pvid, me.lastchange
>>
>> FROM device_port me
>>
>> WHERE me.ip = '10.75.138.51'
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] resolving 0 remote_ips
>> with max 50 outstanding requests
>>
>> SNMP::Info::_validate_autoload_method(i_err_disable_cause) Unable to
>> resolve method.
>>
>> SNMP::Info::_validate_autoload_method(i_faststart_enabled) Unable to
>> resolve method.
>>
>> SNMP::Info::_validate_autoload_method(hasLLDP) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(hasCDP) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(hasSONMP) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(hasFDP) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(hasEDP) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(hasAMAP) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(hasLLDP) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(hasCDP) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(hasSONMP) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(hasFDP) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(hasEDP) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(hasAMAP) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(hasLLDP) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(hasCDP) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(hasSONMP) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(hasFDP) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(hasEDP) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(hasAMAP) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(lldp_media_cap) Unable to resolve
>> method.
>>
>> SNMP::Info::_validate_autoload_method(lldp_rem_vendor) Unable to resolve
>> method.
>>
>> SNMP::Info::_validate_autoload_method(lldp_rem_model) Unable to resolve
>> method.
>>
>> SNMP::Info::_validate_autoload_method(lldp_rem_sw_rev) Unable to resolve
>> method.
>>
>> SNMP::Info::_validate_autoload_method(lldp_rem_serial) Unable to resolve
>> method.
>>
>> BEGIN WORK
>>
>> DELETE FROM device_port_properties
>>
>> WHERE ip = '10.75.138.51'
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] properties - removed 0
>> ports with properties
>>
>> SAVEPOINT savepoint_0
>>
>> INSERT INTO device_port_properties( ifindex, ip, port, raw_speed )
>>
>> VALUES( ?, ?, ?, ? ) : '__BULK_INSERT__'
>>
>> RELEASE SAVEPOINT savepoint_0
>>
>> COMMIT
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] properties - added 30
>> new port properties
>>
>> [197773] 2022-09-12 07:22:57 debug -> run worker main/vlans/100
>>
>> SNMP::Info::_validate_autoload_method(v_name) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(v_index) Unable to resolve method.
>>
>> SELECT me.ip, me.port, me.creation, me.descr, me.up, me.up_admin,
>> me.type, me.duplex, me.duplex_admin, me.speed, me.speed_admin, me.name,
>> me.mac, me.mtu, me.stp, me.remote_ip, me.remote_port, me.remote_type,
>> me.remote_id, me.has_subinterfaces, me.is_master, me.slave_of,
>> me.manual_topo, me.is_uplink, me.vlan, me.pvid, me.lastchange
>>
>> FROM device_port me
>>
>> WHERE me.ip = '10.75.138.51'
>>
>> SNMP::Info::_validate_autoload_method(i_vlan) Unable to resolve method.
>>
>> SNMP::Info::_validate_autoload_method(i_vlan_type) Unable to resolve
>> method.
>>
>> SNMP::Info::_validate_autoload_method(i_vlan_membership) Unable to
>> resolve method.
>>
>> SNMP::Info::_validate_autoload_method(i_vlan_membership_untagged) Unable
>> to resolve method.
>>
>> BEGIN WORK
>>
>> DELETE FROM device_port_vlan
>>
>> WHERE ip = '10.75.138.51'
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] vlans - removed 0 port
>> VLANs
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] vlans - added 0 new
>> port VLANs
>>
>> COMMIT
>>
>> BEGIN WORK
>>
>> DELETE FROM device_vlan
>>
>> WHERE ip = '10.75.138.51'
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] vlans - removed 0
>> device VLANs
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] vlans - added 0 new
>> device VLANs
>>
>> COMMIT
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] vlans - discovered for
>> ports and device
>>
>> [197773] 2022-09-12 07:22:57 debug -> run worker main/wireless/100
>>
>> SNMP::Info::_validate_autoload_method(i_ssidlist) Unable to resolve
>> method.
>>
>> [197773] 2022-09-12 07:22:57 debug -> run worker main/withnodes/0
>>
>> [197773] 2022-09-12 07:22:57 debug Queued macsuck and arpnip for
>> 10.75.138.51.
>>
>> [197773] 2022-09-12 07:22:57 debug => running workers for phase: late
>>
>> [197773] 2022-09-12 07:22:57 debug -> run worker late/hooks/0
>>
>> [197773] 2022-09-12 07:22:57 debug [10.75.138.51] hooks - 0 queued
>>
>> [197773] 2022-09-12 07:22:57 info discover: finished at Mon Sep 12
>> 09:22:57 2022
>>
>> [197773] 2022-09-12 07:22:57 info discover: status done: Ended discover
>> for 10.75.138.51
>>
>> netdisco@CHJUVM012:/root$
>>
>>
>>
>>
>>
>> Any ideas, tips or hints?
>>
>>
>>
>> Regards
>>
>>
>>
>> *Daniel Meier*
>>
>> System- and Network Specialist
>>
>>
>>
>> JURA Management AG
>>
>> c/o Aarekies Aarau-Olten AG
>>
>> Im Lostorf 3 ▪ 5033 Buchs/AG
>>
>> T +41 62 832 38 65 ▪ M +41 79 176 85 98
>>
>> juramaterials.ch <http://www.juramaterials.ch/> ▪
>> daniel.me...@juramaterials.ch
>>
>>
>> _______________________________________________
>> Netdisco mailing list
>> netdisco-users@lists.sourceforge.net
>> https://sourceforge.net/p/netdisco/mailman/netdisco-users/
>>
> _______________________________________________
> Netdisco mailing list
> netdisco-users@lists.sourceforge.net
> https://sourceforge.net/p/netdisco/mailman/netdisco-users/
--- End Message ---
