Help again please ! Is anyone out there using a Logitech QC Home (V1.03) with NetMeeting V3.01 (4.4.3388) and having or have had problems in getting the LT QC inbuilt mic to work successfully with NM.....any versions !? Yes I have been through all the NM and Logitech FAQ's to no avail. Checked all the system default (preferred) audio (Multimedia & System Device Mgr) and NM audio settings to make sure everything is matched and also reinstalled LT QC Home and NM as suggested by Logitech. The NM Tuning Wizard works fine and it says that you have been "successful" in tuning the mic and audio for the call, but once in a call the mic meter only registers "one segment" of the entire meter and the other party cannot hear anything at all. Similarly I cannot hear my caller who also has the same LT QC hardware and software. My generic mic and software (AWE64 Soundblaster) works fine but once the Recording setting is changed to Logitech USB microphone, the mic does not pick up any sound at all. The mic works normally in terms of recording other audio and video clips but it certainly doesn't like NetMeeting! Any ideas welcome! Many thanks. Rod Phillips Witch Stitch Needlecraft & Framing 55 Mitchell St Chifley Sydney NSW 2036 Australia Phone: 02 9311 4546 Fax:�� 02 9311 3250 Email: [EMAIL PROTECTED] http://www.users.bigpond.com/witchstitch ----------------------------------------------------------------------- http://www.meetingbywire.com/Mailinglist.htm for unsubscribe information -----------------------------------------------------------------------
