THanks for the advice. Last evening I got it working. Not sure what I did
but it seems that installing WIN98 SP1 helped. Or maybe not. I did not note
everything I did so to attribute the solution to something in particular is
difficile. Folks you may want to try that though. You may also want to try
changing ILS servers. If you have been only using the same one for all of
your tests
Thanks to Brian for the tip on the green light being on for the audio
connection. It helped a lot.
-----Message d'origine-----
De: Qazi [SMTP:[EMAIL PROTECTED]]
Date: Tuesday, March 21, 2000 9:42 PM
A: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Objet: Re: [NetMeeting] Can only connect to data calls - wrong modem
settings?
Dear Terry,
Good evening and best wishes! Is your processor more than 166 MHz? If
not,
the problem lies with the device driver not being able to be activated due
limits of the processor. If so, you should download the latest service pack
1for the netmeeting, from the windows update page . This should solve the
problems. And, further, never manually set the squelch or noise level of
the audio!
Wish you good luck!
Sincerely,
Qazi
----- Original Message -----
From: "Terry Knee" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, March 21, 2000 5:21 AM
Subject: [NetMeeting] Can only connect to data calls - wrong modem
settings?
>
> Hi
>
> I have Netmeeting 3.01 and Logitech quickcam express 1.50. When I open
> Netmeeting, my camera is recognized and I can see myself in the
Netmeeting
> window.
>
> When I connect to a caller on an ILS server I can use chat etc but cannot
> connect to video or audio. The Video -> Send setting is selected, but the
> Video -> Receive setting remains grey ( I cannot select it). It is as if
> the video/audio protocol is not connected. All settings in the
> Tools->Options are set to automatic send/receive for video and sound.
>
> Could it be a modem problem? I am using a 3Com US Robotics WinModem, 56K,
> inetrnal PCI card. Are there any special settings for the modem to ensure
> that both the data and the video protocol are enacted at the same time. I
> have removed IP header compression from the modem setting as suggested by
> Microsoft.
>
> BTW, I just reformatted my hard disk and reinstalled WIN98 so there
should
> not be a conflict problem. Actually I had the exact same problem before I
> did the reformat (that was not the reason I did it though, fortunately).
>
> Thanks
>
> Terry
>
>
> -----------------------------------------------------------------------
> http://www.meetingbywire.com/Mailinglist.htm for unsubscribe information
> -----------------------------------------------------------------------
>
>
-----------------------------------------------------------------------
http://www.meetingbywire.com/Mailinglist.htm for unsubscribe information
-----------------------------------------------------------------------
-----------------------------------------------------------------------
http://www.meetingbywire.com/Mailinglist.htm for unsubscribe information
-----------------------------------------------------------------------
