> Hi Everyone!
> i sure hope this can be solved. I have had 3.01 for as long as it
> has been
> out almost. I have not updated it as I read it caused problems with lost
> directory etc. But I have no sound that is audible or at best is not
> understandable. Never have been able to get it to work and a lot of folks
> say it is not good but they can understand others. Why wont mine work? I
> have Phillips cam that has a mike and i also have pc mike . When
> I configure
> sound it says "sound card needs updated drivers will not support volume
> control" I did installl newest drivers , Is it because I have the mike in
> the cam and tyhe mike in the pc> A lot of people can hear me I just cant
> understand them. I used bith audio choices in set up and no
> better?? HP6460
> pc with98 ram and 10 gb hardrive. I get good to excellent voice
> on Paltalk
You have a camera with mic input and a separate sound card (or a sound card
built into the computer) with mic input? When you say you have installed the
latest drivers -- this is both for your sound card and the "sound card"
included with your camera -- most likely part of the camera drivers? Which
sound input is being used in Netmeeting? When you run the audio tuning
wizard it should give you a choice - have you tried with the sound card as
input and the camera mic? Is this problem with both sound input devices?
-----------------------------------------------------------------------
http://www.meetingbywire.com/Mailinglist.htm for unsubscribe information
-----------------------------------------------------------------------
