Андрей Данин wrote:
> Mac OS usually have eth0, eth1 interfaces names... Possibly problem is in the
> interface name.
max:~ max$ ifconfig -a
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:0d:93:68:fc:84
media: autoselect (none) status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP
<full-duplex> 10baseT/UTP <full-duplex,flow-control> 10baseT/UTP
<full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX
<full-duplex> 100baseTX <full-duplex,flow-control> 100baseTX
<full-duplex,hw-loopback>
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
lladdr 00:0d:93:ff:fe:68:fc:84
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.1.88 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:11:24:a9:c0:31
media: autoselect status: active
supported media: autoselect
_______________________________________________
Netsukuku mailing list
[email protected]
http://lists.dyne.org/mailman/listinfo/netsukuku
