Il 27/04/2012 00:00, Luca Dionisi ha scritto: > It is possible to compile a OpenWRT firmware for the wireless router > TPLink WR1043ND with which you can run Netsukuku. > This device has 8 MB of flash storage and 32 MB of RAM. > (It also has an USB port that one could use to get more storage, but > that's not needed to be able to run ntkd) > > I finally succeeded to install it. It is the Vala implementation that > I am working on recently. > It hasn't got yet all of the features that were in the python version. > Anyhow, once you start it and give it a NIC interface, it will automatically: > * obtain an IP address (this will not harm the one IP you got from > your ISP, if any) > * listen to neighborhood for other netsukuku nodes > * configure routing tables in order to reach other nodes in the network > > During the process I wrote down some notes, I placed them here today: > http://lab.dyne.org/Netsukuku_Dev/vala/flashing_notes > > It's a starting point, if someone wants to try with its hardware. > > --Luca
eddaje :-D ops, sorry!! \o great job Luca :-) -- lilo GnuPG/PGP Key-Id: 0x5D172559 _______________________________________________ Netsukuku mailing list [email protected] http://lists.dyne.org/mailman/listinfo/netsukuku
