Hi Guys, Didn't have time to write more at length last time. If the K8 is an nForce 4 chipset you'll have connectivity problems if you're not auto-negotiate on both sides of the Ethernet cable. That might explain the problems. We had Sun swap all our X2100s for X2100 M2s because of the problem.
I can post a full internal write-up from my company on the problem if that ends up being the issue. Best Regards, Jason On 1/11/07, Bart Smaalders <[EMAIL PROTECTED]> wrote:
Jason J. W. Williams wrote: > Hi David, > > Do you have a duplex-mismatch? > > -J > > On 1/11/07, David Helm <[EMAIL PROTECTED]> wrote: >> I too have a problem with the latest nge driver (version 1.14 >> according to modinfo) on the above mobo. (I'm running Solaris 10_U2 >> and Solaris 10_U3) The interface will not even plumb with dhcp (I use >> inetmenu to configure network interfaces) and if given a static IP, >> the interface plumbs and ifconfig says that everything is ok, but the >> interface cannot see anything on the network. Version 1.14 of the >> driver comes with the 122530-05 nge patch for Solaris x86. >> Interestingly enough, if the driver is rolled back to 1.13 (patch >> 122530-02) everything works just fine. >> >> Anyone have any clues as to why? >> >> Thanks >> -Dave I'm seeing the same problem on a K8. - Bart -- Bart Smaalders Solaris Kernel Performance [EMAIL PROTECTED] http://blogs.sun.com/barts
_______________________________________________ networking-discuss mailing list [email protected]
