Hi All,
I have set up 2 non-global zones with 2 seperate ip's on a different subnet. I
have also set up one extra ip of same subnet in global zone for networking b/w
global and no gloabal zones.
I have a 100MBPS NIC and want to limit bandwidth 1MBPS each for my non global
zones. I have never used IPQoS before thus I'm trying to limit ftp traffic at
first.
I've written following files but my Ftp traffic is not affected.
Can someone help me identify the problem?
Thanks in Advance,
Manish
My IPQoS config file:-
^^^^^^^^^^^^^^^^^^
fmt_version 1.0
action {
module ipgpc
name ipgpc.classify
params {
global_stats TRUE
}
class {
name ftp_traffic
next_action ftpcap
enable_stats FALSE
}
filter {
name ftp_out1
saddr 192.168.0.3
daddr 192.168.0.1
sport 20
direction LOCAL_OUT
class ftp_traffic
}
filter {
name ftp_in1
daddr 192.168.0.3
saddr 192.168.0.2
sport 20
direction LOCAL_IN
class ftp_traffic
}
filter {
name ftp_in2
daddr 192.168.0.3
saddr 192.168.0.1
sport 20
direction LOCAL_IN
class ftp_traffic
}
filter {
name ftp_out2
saddr 192.168.0.3
daddr 192.168.0.2
sport 20
direction LOCAL_OUT
class ftp_traffic
}
}
action {
module tokenmt
name ftpcap
params {
committed_rate 1048
committed_burst 1048
peak_burst 1048
red_action_name continue
green_action_name continue
yellow_action_name continue
global_stats TRUE
}
}
Network configuration of my machine:-
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-bash-3.00# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
inet 127.0.0.1 netmask ff000000
lo0:1: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
zone zone1
inet 127.0.0.1 netmask ff000000
lo0:2: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
zone mzone
inet 127.0.0.1 netmask ff000000
bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 172.16.41.22 netmask ffffff00 broadcast 172.16.41.255
ether 0:13:d3:40:d1:ba
bge0:1: flags=4001000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
zone zone1
inet 192.168.0.1 netmask ffffff00 broadcast 192.168.0.255
bge0:2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
zone mzone
inet 192.168.0.2 netmask ffffff00 broadcast 192.168.0.255
bge0:3: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 192.168.0.3 netmask ffffff00 broadcast 192.168.0.255
------------------------------------------------------------------------------------------
This message posted from opensolaris.org
_______________________________________________
networking-discuss mailing list
[email protected]
