Hi Tom,
Please try "prtconf -D |grep qlge" to find out the instance number of
qlge in your system.
Thanks,
Samuel
Tom Chen wrote:
Hello,
I am testing a dual port NIC adapter driver, qlge. I encountered a crash when I use
"ifconfig qlge0 plumb" and somehow, even if I loaded a stable version, qlge0
remains unable to load. Probably, it is disabled by OS. But, another port, qlge1, is
still ok.
I am wondering how to restore qlge0?
Tom
bash-3.2# uname -a
SunOS archimedes 5.11 snv_121 sun4u sparc SUNW,Sun-Fire-V215
bash-3.2# ifconfig qlge0 plumb
ifconfig: cannot open link "qlge0": No such device or address
bash-3.2# ifconfig qlge1 plumb
bash-3.2# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
inet 127.0.0.1 netmask ff000000
bge1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 172.17.139.78 netmask fffffe00 broadcast 172.17.139.255
ether 0:14:4f:7a:b2:5d
qlge1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 192.168.43.78 netmask ffffff00 broadcast 192.168.43.255
ether 0:c0:dd:10:8c:66
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
inet6 ::1/128
bash-3.2#
_______________________________________________
networking-discuss mailing list
[email protected]
