Hello, On Fri, Mar 19, 2010 at 2:20 AM, Sebastien Roy <[email protected]> wrote: > Hello Thomas, > > On 03/18/10 05:41 PM, Thomas Schoeller wrote: >> >> Hello, >> >> how is it possible to disable STP completely on a Opensolaris bridge? > > You can disable STP on individual links using the "stp" dladm link property > documented in the dladm(1M) man page: > > stp > > Enables or disables Spanning Tree Protocol on a bridge > link. Setting this value to 0 disables Spanning Tree, > and puts the link into forwarding mode with BPDU guard- > ing enabled. This mode is appropriate for point-to-point > links connected only to end nodes. Only non-VLAN, non- > VNIC type links have this property. The default value is > 1, to enable STP.
i know about the "stp" linkprop, but i need to disable STP completely, in special the BPDU guarding. is this possible? to explain my problem, my opensolaris box is connected to a cisco switch in access mode, the switch sends BPDU and the Opensolaris bridge disables ports in "stp" prop 0 if it receives a BPDU. if i enable the "stp" prop on this interface the switch port goes "error-disable". thomas _______________________________________________ networking-discuss mailing list [email protected]
