I have added the line to both servers and rebooted...but there does not appear to have been any change to the transfer rate (max. ~45MB/s for large files and down to 20-30MB/s for smaller).
I compiled and installed iperf on both machines and am getting the following rates...so something is not right. Both servers have decent disk write speeds (230MB/s for the nas and 120MB for the backup server). [b]HELP...What do I look at next to debug this?[/b] n...@nas:~$ iperf -c 192.168.0.3 -f M -m ------------------------------------------------------------ Client connecting to 192.168.0.3, TCP port 5001 TCP window size: 0.05 MByte (default) ------------------------------------------------------------ [ 3] local 192.168.0.1 port 40109 connected with 192.168.0.3 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1116 MBytes 112 MBytes/sec [ 3] MSS size 1460 bytes (MTU 1500 bytes, ethernet) Message was edited by: tomwater -- This message posted from opensolaris.org _______________________________________________ networking-discuss mailing list [email protected]
