> > wifi is usable when I create a b138+ BE that has
> > nwam disabled, and I manually configure the iwh0
> > wifi interface once the gui is up and running, with:
> >
> > ifconfig iwh0 plumb
> > dladm connect-wifi -e ESSID -k wpa-key iwh0
> > ifconfig iwh0 dhcp start
> >
> >
> > There also is a flag day message about nwam phase 1:
> >
> > http://static.opensolaris.org/on/flagdays/pages/20100225200206.html
> >
> > I tried nwam on current opensolaris bits with and without
> > the updated nwam gui but (most of the time) wifi didn't
> > work. Disabling nwam and manual configuring it (with the
> > above commands) seems to work much better.
>
> I've got the same trouble. It seems particularly bad with iwh -- it
> looks like nwamd just doesn't wait long enough for the connection to
> occur, or that there's something funky about the
> driver.
Other error messages I see in the b138 nwam + nwam gui case:
/var/adm/messages:
Apr 18 19:25:00 fritz genunix: [ID 634369 kern.warning] WARNING:
ieee80211_event: door_ki_open(/var/run/wpa_door_iwh0) failed
Apr 18 19:25:00 fritz nwamd[302]: [ID 980191 daemon.error] 1:
nwamd_ncu_handle_state_event 13: state event for nonexistent NCU link:e1000g0
Apr 18 19:25:00 fritz nwamd[302]: [ID 114544 daemon.error] 1:
nwamd_ncu_handle_fini_event: ncu link:e1000g0 not found
Apr 18 19:25:00 fritz nwamd[302]: [ID 698371 daemon.error] 1:
nwamd_ncu_handle_state_event 14: state event for nonexistent NCU
interface:e1000g0
Apr 18 19:25:00 fritz nwamd[302]: [ID 399986 daemon.error] 1:
nwamd_ncu_handle_fini_event: ncu interface:e1000g0 not found
Apr 18 19:25:00 fritz nwamd[302]: [ID 941461 daemon.error] 1:
nwamd_ncu_handle_state_event 15: state event for nonexistent NCU link:iwh0
Apr 18 19:25:00 fritz nwamd[302]: [ID 274094 daemon.error] 1:
nwamd_ncu_handle_fini_event: ncu link:iwh0 not found
Apr 18 19:25:00 fritz nwamd[302]: [ID 621722 daemon.error] 1:
nwamd_ncu_handle_state_event 16: state event for nonexistent NCU interface:iwh0
Apr 18 19:25:00 fritz nwamd[302]: [ID 871279 daemon.error] 1:
nwamd_ncu_handle_fini_event: ncu interface:iwh0 not found
Apr 18 19:25:00 fritz nwamd[302]: [ID 330189 daemon.error] 1:
nwamd_loc_handle_fini_event: loc Automatic not found
Apr 18 19:25:00 fritz nwamd[302]: [ID 836831 daemon.error] 1:
nwamd_loc_handle_fini_event: loc NoNet not found
Apr 18 19:25:00 fritz nwamd[302]: [ID 750170 daemon.error] 1:
nwamd_loc_handle_fini_event: loc User not found
A problem with the wpad process not running??
svcs -x doesn't list problems, but I noticed that
some strange messages are logged to
/var/svc/log/network-physical:nwam.log:
[ Apr 18 19:24:45 Enabled. ]
[ Apr 18 19:24:47 Executing start method ("/lib/svc/method/net-nwam start"). ]
[ Apr 18 19:24:49 Method "start" exited with status 0. ]
[ Apr 18 19:24:51 Rereading configuration. ]
[ Apr 18 19:24:51 Executing refresh method ("/lib/svc/method/net-nwam
refresh"). ]
[ Apr 18 19:24:52 Method "refresh" exited with status 0. ]
6: sysevent_subscribe_event: Invalid argument
[ Apr 18 19:25:00 Stopping because all processes in service exited. ]
[ Apr 18 19:25:00 Executing stop method ("/lib/svc/method/net-nwam stop"). ]
No Legacy location to revert to!
[ Apr 18 19:25:00 Method "stop" exited with status 0. ]
[ Apr 18 19:25:00 Executing start method ("/lib/svc/method/net-nwam start"). ]
/sbin/dladm: secure object initialization failed: object already exists
[ Apr 18 19:25:00 Method "start" exited with status 0. ]
[ Apr 18 19:25:00 Rereading configuration. ]
[ Apr 18 19:25:00 Executing refresh method ("/lib/svc/method/net-nwam
refresh"). ]
[ Apr 18 19:25:00 Method "refresh" exited with status 0. ]
--
This message posted from opensolaris.org
_______________________________________________
networking-discuss mailing list
[email protected]
