The output from dladm show-aggr -L and uname -a might help.
Ian Garbutt wrote:
I'm having some problems configuring VLANS, and I hope some people could help
me out here.
We have an aggrigation with 4 network ports (nxge cards). When these are configured on the Cisco switchs all remove connectivity seems to fail.
aggr is set up - dladm create-aggr -P L2 -l active -d nxge0... 1 (tried L4 -l off/passive etc)
The aggrigation is set to aggr1, but this is not the VLAN, the VLAN I set up is
VLAN 525 and I set up by ifconfig aggr525001 plumb, ifconfig aggr525001
172.18.48.200 /19 up.
But I can't ping anything at all, aggr1 or aggr525001!
The Network lads think the cisco switches are set up as they should be, and
they are pretty good so no reason why not - but if anybody has any ideas..??
--
<http://www.oracle.com>
Jon Anderson
Tel: ++44 (0) 1252 421 868
Mob: ++44 (0) 7747 180 910
ORACLE RPE Systems
SPARC House (UK)
"Please consider your environmental responsibility before
printing this email."
_______________________________________________
networking-discuss mailing list
[email protected]
