I have Ubuntu Karmic which comes with 0.8. The serial port driver is ks_959 (Kingsun dongle). The driver loads automatically, then I need to irattach and load ircomm_tty and sir stuff.
I have seen that modprobing these drivers does not trigger modemmanager. However it the dongle is plugged in on boot modemmanager does start and starts to probe the ircomm port. This is the wrong one as the Kingsun only supports sir and not fir. And apparently the init.d scripts do a little extra so that modemmanager starts. But I'll try your suggestions and report back. Thanks, -- Ferry Toth -----Oorspronkelijke bericht----- Van: Dan Williams <d...@redhat.com> Aan: Ferry Toth <ft...@telfort.nl> Cc: networkmanager-list@gnome.org Onderwerp: Re: network manager and GSM IrDA connection Datum: Tue, 17 Nov 2009 14:04:10 -0800 On Thu, 2009-11-12 at 22:07 +0100, Ferry Toth wrote: > I have a GSM with GPRS that connects using IrDA. > > I can setup a connection manually, but I need it to be done by network > manager as that notifies my applications an internet connection is > available. > > I can not find how to configure nm so that it is notified that irda is > up, so that nm can start the pppd. > > What I am trying to achieve is let udev do the work for setting up the > irda connection, but don't know how nm is triggered. Do I need to send > a dbus message? NM 0.7 or 0.8? With NM 0.7, a callout helper is used to probe the device for its capabilities when the serial port shows up. But the prober is limited to known mobile broadband devices, and IrDA isn't one of them. You'll need to find out the driver for your irda serial port (it's probably "ircomm_tty") and then add that to this line in /lib/udev/rules.d/77-nm-probe-modem-capabilities.rules : # Only probe known mobile broadband drivers DRIVERS=="option|sierra|hso|cdc_acm|qcserial|moto-modem", GOTO="probe" That will cause NM to probe the port for mobile broadband support when the port shows up, so make sure your phone is on and it's all connected and everything. For NM 0.8, ModemManager is used and it'll just probe every serial port at the moment (we'll fix that). Here, make sure it all works by stopping NM and modem-manager, then run "modem-manager --debug" and get the irda port set up and see if ModemManager find it. If not, we can try to debug from there. I'm not sure about natively supporting IrDA since that seems to be going out, but if the patches aren't huge it's probably a win. Dan
_______________________________________________ NetworkManager-list mailing list NetworkManager-list@gnome.org http://mail.gnome.org/mailman/listinfo/networkmanager-list