On Wed, 2013-10-02 at 16:40 -0500, Dan Williams wrote: > On Wed, 2013-10-02 at 13:45 -0700, Kenneth Berland wrote: > > AT&T says its a good account and that everything looks good from their > > end. They don't see any errors. > > > > If you're sure, I'll go down there and ask to put it in a hotspot and have > > them prove it. > > Before you try a data connection, can you: > > mmcli -m 0 -e > <wait a bit> > mmcli -m 0 > > and keep running that last command until the modem reports that it is no > longer "searching" for registration. Then lets see what the > registration is. For example: > > 3GPP | imei: 'xxxxxxxxx' > | enabled locks: 'none' > | operator id: '311480' > | operator name: 'Verizon Wireless' > ----->>>> | registration: 'home'
Oh, and what APN are you using? Dan > Dan > > > -KB > > > > > > On Wed, 2 Oct 2013, Kenneth Berland wrote: > > > > > Dan, > > > > > > Good to know. I had suspected as much, but was unable to confirm with > > > AT&T > > > telephone support. I will visit the store (shudder) and see if they can > > > make > > > it work in another device. > > > > > > -KB > > > > > > > > > On Wed, 2 Oct 2013, Dan Williams wrote: > > > > > >> On Wed, 2013-10-02 at 08:05 -0700, Kenneth Berland wrote: > > >>> List, > > >>> > > >>> Trying to get a Sierra Wireless MC8355 - Gobi 3000 working on the AT&T > > >>> network here in the Bay Area. It works on T-Mobile (see my earlier post > > >>> to this list). > > >>> > > >>> NM moves along well until it errors-out with these lines (I think): > > >>> > > >>> Oct 2 07:35:50 ken-x230 ModemManager[1811]: <info> error: couldn't > > >>> start > > >>> network: QMI protocol error (14): 'CallFailed' > > >>> Oct 2 07:35:50 ken-x230 ModemManager[1811]: <info> call end reason > > >>> (1018): 'gsm-wcdma-option-unsubscribed' > > >>> Oct 2 07:35:50 ken-x230 ModemManager[1811]: <info> verbose call end > > >>> reason (6,33): [3gpp] option-unsubscribed > > >>> Oct 2 07:35:50 ken-x230 ModemManager[1811]: <info> error: couldn't > > >>> get > > >>> current settings: QMI protocol error (15): 'OutOfCall' > > >>> > > >>> Is anyone running on AT&T who can share their configs? > > >> > > >> Unsubscribed may mean your SIM has not been activated with AT&T or has > > >> been *de*activated due to lack of use or something like that. Does it > > >> work in other devices, or in a phone? > > >> > > >> Dan > > >> > > >>> Here is what I think the relevant sysinfo might be, and below that are > > >>> my > > >>> full logs for the time of the failure. > > >>> > > >>> TIA, > > >>> Ken > > >>> > > >>> ken@ken-x230: ~$ grep ModemManager /var/log/syslog* | grep starting | > > >>> tail > > >>> -1 > > >>> /var/log/syslog.1:Oct 1 17:31:14 ken-x230 ModemManager[15881]: <info> > > >>> ModemManager (version 0.7.990) starting... > > >>> ken@ken-x230: ~$ NetworkManager --version > > >>> 0.9.9.0 > > >>> ken@ken-x230: ~$ mmcli -L > > >>> > > >>> Found 1 modems: > > >>> /org/freedesktop/ModemManager1/Modem/4 [Sierra Wireless Inc] Sierra > > >>> Wireless MC8355 - Gobi 3000(TM) Module > > >>> > > >>> ken@ken-x230: ~$ mmcli -m 4 > > >>> > > >>> /org/freedesktop/ModemManager1/Modem/4 (device id > > >>> '48e19cdd7c73e6030ba12406b9c0bd7cc283d929') > > >>> ------------------------- > > >>> Hardware | manufacturer: 'Sierra Wireless Inc' > > >>> | model: 'Sierra Wireless MC8355 - Gobi 3000(TM) > > >>> Module' > > >>> | revision: 'D3200-STSUGN-1580 1 [Jul 08 2011 > > >>> 18:00:00]' > > >>> | capabilities: 'gsm-umts' > > >>> | current: 'gsm-umts' > > >>> | equipment id: '35x569x423x602x' > > >>> ------------------------- > > >>> System | device: > > >>> '/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4' > > >>> | drivers: 'qcserial, qmi_wwan' > > >>> | plugin: 'Gobi' > > >>> | primary port: 'cdc-wdm0' > > >>> ------------------------- > > >>> Numbers | own : '1xxx693x3xx' > > >>> ------------------------- > > >>> Status | lock: 'sim-pin2' > > >>> | unlock retries: 'sim-pin (3), sim-pin2 (3), sim-puk (10), > > >>> sim-puk2 (10)' > > >>> | state: 'registered' > > >>> | access tech: 'umts' > > >>> | signal quality: '92' (cached) > > >>> ------------------------- > > >>> Modes | supported: '2g, 3g' > > >>> | allowed: '2g, 3g' > > >>> | preferred: 'none' > > >>> ------------------------- > > >>> Bands | supported: 'cdma-bc15-aws, dcs, egsm, pcs, g850, > > >>> u2100, > > >>> u1900, u800, u850, u900' > > >>> | current: 'cdma-bc15-aws, dcs, egsm, pcs, g850, > > >>> u2100, > > >>> u1900, u800, u850, u900' > > >>> ------------------------- > > >>> 3GPP | imei: '35xx6x04x34x02x' > > >>> | enabled locks: 'none' > > >>> | operator id: '310410' > > >>> | operator name: 'AT&T' > > >>> | registration: 'home' > > >>> ------------------------- > > >>> SIM | path: '/org/freedesktop/ModemManager1/SIM/4' > > >>> > > >>> > > >>> > > >>> Oct 2 07:35:33 ken-x230 ModemManager[1811]: <info> Modem enabling... > > >>> Oct 2 07:35:33 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: state changed (disabled -> > > >>> enabling) > > >>> Oct 2 07:35:33 ken-x230 ModemManager[1811]: <info> (ttyUSB1) opening > > >>> serial port... > > >>> Oct 2 07:35:33 ken-x230 ModemManager[1811]: <warn> (ttyUSB1): port > > >>> attributes not fully set > > >>> Oct 2 07:35:33 ken-x230 ModemManager[1811]: <info> (ttyUSB0) opening > > >>> serial port... > > >>> Oct 2 07:35:33 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem > > >>> state changed, 'disabled' --> 'enabling' (reason: user-requested) > > >>> Oct 2 07:35:34 ken-x230 ModemManager[1811]: <info> Falling back to > > >>> previous state 'disabled' > > >>> Oct 2 07:35:34 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: state changed (enabling -> > > >>> disabled) > > >>> Oct 2 07:35:34 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem > > >>> state changed, 'enabling' --> 'disabled' (reason: unknown) > > >>> Oct 2 07:35:34 ken-x230 NetworkManager[15840]: <warn> (cdc-wdm0) > > >>> failed > > >>> to enable modem: > > >>> GDBus.Error:org.freedesktop.libqmi.Error.Protocol.InformationUnavailable: > > >>> > > >>> Couldn't get serving system: QMI protocol error (74): > > >>> 'InformationUnavailable' > > >>> Oct 2 07:35:37 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: signal quality updated (91) > > >>> Oct 2 07:35:37 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: access technology changed > > >>> (unknown > > >>> -> umts) > > >>> Oct 2 07:35:46 ken-x230 ModemManager[1811]: <info> Modem enabling... > > >>> Oct 2 07:35:46 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: state changed (disabled -> > > >>> enabling) > > >>> Oct 2 07:35:46 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem > > >>> state changed, 'disabled' --> 'enabling' (reason: user-requested) > > >>> Oct 2 07:35:46 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: 3GPP Registration state changed > > >>> (unknown -> registering) > > >>> Oct 2 07:35:46 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: 3GPP Registration state changed > > >>> (registering -> home) > > >>> Oct 2 07:35:47 ken-x230 ModemManager[1811]: <info> Modem fully > > >>> enabled... > > >>> Oct 2 07:35:47 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: state changed (enabling -> > > >>> registered) > > >>> Oct 2 07:35:47 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem > > >>> state changed, 'enabling' --> 'registered' (reason: user-requested) > > >>> Oct 2 07:35:47 ken-x230 NetworkManager[15840]: <info> WWAN now enabled > > >>> by > > >>> management service > > >>> Oct 2 07:35:47 ken-x230 NetworkManager[15840]: <info> Auto-activating > > >>> connection 'att'. > > >>> Oct 2 07:35:47 ken-x230 NetworkManager[15840]: <info> Activation > > >>> (cdc-wdm0) starting connection 'att' > > >>> Oct 2 07:35:47 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0): > > >>> device > > >>> state change: disconnected -> prepare (reason 'none') [30 40 0] > > >>> Oct 2 07:35:47 ken-x230 NetworkManager[15840]: <info> Activation > > >>> (cdc-wdm0) Stage 1 of 5 (Device Prepare) scheduled... > > >>> Oct 2 07:35:47 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: signal quality updated (91) > > >>> Oct 2 07:35:47 ken-x230 NetworkManager[15840]: <info> Activation > > >>> (cdc-wdm0) Stage 1 of 5 (Device Prepare) started... > > >>> Oct 2 07:35:47 ken-x230 NetworkManager[15840]: <info> Activation > > >>> (cdc-wdm0) Stage 1 of 5 (Device Prepare) complete. > > >>> Oct 2 07:35:47 ken-x230 ModemManager[1811]: <info> Simple connect > > >>> started... > > >>> Oct 2 07:35:47 ken-x230 ModemManager[1811]: <info> Simple connect > > >>> state > > >>> (4/10): Wait to get fully enabled > > >>> Oct 2 07:35:47 ken-x230 ModemManager[1811]: <info> Simple connect > > >>> state > > >>> (5/10): Allowed mode > > >>> Oct 2 07:35:49 ken-x230 ModemManager[1811]: <info> Simple connect > > >>> state > > >>> (6/10): Bands > > >>> Oct 2 07:35:49 ken-x230 ModemManager[1811]: <info> Simple connect > > >>> state > > >>> (7/10): Register > > >>> Oct 2 07:35:49 ken-x230 ModemManager[1811]: <info> Simple connect > > >>> state > > >>> (8/10): Bearer > > >>> Oct 2 07:35:49 ken-x230 ModemManager[1811]: <info> Simple connect > > >>> state > > >>> (9/10): Connect > > >>> Oct 2 07:35:49 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: state changed (registered -> > > >>> connecting) > > >>> Oct 2 07:35:49 ken-x230 ModemManager[1811]: [/dev/cdc-wdm0] Allocating > > >>> new client ID... > > >>> Oct 2 07:35:49 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem > > >>> state changed, 'registered' --> 'connecting' (reason: user-requested) > > >>> Oct 2 07:35:49 ken-x230 ModemManager[1811]: [/dev/cdc-wdm0] Registered > > >>> 'wds' (version 1.8) client with ID '1' > > >>> Oct 2 07:35:50 ken-x230 ModemManager[1811]: <info> error: couldn't > > >>> start > > >>> network: QMI protocol error (14): 'CallFailed' > > >>> Oct 2 07:35:50 ken-x230 ModemManager[1811]: <info> call end reason > > >>> (1018): 'gsm-wcdma-option-unsubscribed' > > >>> Oct 2 07:35:50 ken-x230 ModemManager[1811]: <info> verbose call end > > >>> reason (6,33): [3gpp] option-unsubscribed > > >>> Oct 2 07:35:50 ken-x230 ModemManager[1811]: <info> error: couldn't > > >>> get > > >>> current settings: QMI protocol error (15): 'OutOfCall' > > >>> Oct 2 07:35:50 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: state changed (connecting -> > > >>> registered) > > >>> Oct 2 07:35:50 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem > > >>> state changed, 'connecting' --> 'registered' (reason: user-requested) > > >>> Oct 2 07:35:50 ken-x230 NetworkManager[15840]: <warn> (cdc-wdm0) > > >>> failed > > >>> to connect modem: QMI protocol error (14): 'CallFailed' > > >>> Oct 2 07:35:50 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0): > > >>> device > > >>> state change: prepare -> failed (reason 'unknown') [40 120 1] > > >>> Oct 2 07:35:50 ken-x230 NetworkManager[15840]: <warn> Activation > > >>> (cdc-wdm0) failed for connection 'att' > > >>> Oct 2 07:35:50 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0): > > >>> device > > >>> state change: failed -> disconnected (reason 'none') [120 30 0] > > >>> Oct 2 07:35:50 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0): > > >>> deactivating device (reason 'none') [0] > > >>> Oct 2 07:35:54 ken-x230 NetworkManager[15840]: <info> Auto-activating > > >>> connection 'att'. > > >>> Oct 2 07:35:54 ken-x230 NetworkManager[15840]: <info> Activation > > >>> (cdc-wdm0) starting connection 'att' > > >>> Oct 2 07:35:54 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0): > > >>> device > > >>> state change: disconnected -> prepare (reason 'none') [30 40 0] > > >>> Oct 2 07:35:54 ken-x230 NetworkManager[15840]: <info> Activation > > >>> (cdc-wdm0) Stage 1 of 5 (Device Prepare) scheduled... > > >>> Oct 2 07:35:54 ken-x230 NetworkManager[15840]: <info> Activation > > >>> (cdc-wdm0) Stage 1 of 5 (Device Prepare) started... > > >>> Oct 2 07:35:54 ken-x230 NetworkManager[15840]: <info> Activation > > >>> (cdc-wdm0) Stage 1 of 5 (Device Prepare) complete. > > >>> Oct 2 07:35:54 ken-x230 ModemManager[1811]: <info> Simple connect > > >>> started... > > >>> Oct 2 07:35:54 ken-x230 ModemManager[1811]: <info> Simple connect > > >>> state > > >>> (4/10): Wait to get fully enabled > > >>> Oct 2 07:35:54 ken-x230 ModemManager[1811]: <info> Simple connect > > >>> state > > >>> (5/10): Allowed mode > > >>> Oct 2 07:35:56 ken-x230 ModemManager[1811]: <info> Simple connect > > >>> state > > >>> (6/10): Bands > > >>> Oct 2 07:35:56 ken-x230 ModemManager[1811]: <info> Simple connect > > >>> state > > >>> (7/10): Register > > >>> Oct 2 07:35:56 ken-x230 ModemManager[1811]: <info> Simple connect > > >>> state > > >>> (8/10): Bearer > > >>> Oct 2 07:35:56 ken-x230 ModemManager[1811]: <info> Simple connect > > >>> state > > >>> (9/10): Connect > > >>> Oct 2 07:35:56 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: state changed (registered -> > > >>> connecting) > > >>> Oct 2 07:35:56 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem > > >>> state changed, 'registered' --> 'connecting' (reason: user-requested) > > >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> error: couldn't > > >>> start > > >>> network: QMI protocol error (14): 'CallFailed' > > >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> call end reason > > >>> (1018): 'gsm-wcdma-option-unsubscribed' > > >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> verbose call end > > >>> reason (6,33): [3gpp] option-unsubscribed > > >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> error: couldn't > > >>> get > > >>> current settings: QMI protocol error (15): 'OutOfCall' > > >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: state changed (connecting -> > > >>> registered) > > >>> Oct 2 07:35:57 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem > > >>> state changed, 'connecting' --> 'registered' (reason: user-requested) > > >>> Oct 2 07:35:57 ken-x230 NetworkManager[15840]: <warn> (cdc-wdm0) > > >>> failed > > >>> to connect modem: QMI protocol error (14): 'CallFailed' > > >>> Oct 2 07:35:57 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0): > > >>> device > > >>> state change: prepare -> failed (reason 'unknown') [40 120 1] > > >>> Oct 2 07:35:57 ken-x230 NetworkManager[15840]: <warn> Activation > > >>> (cdc-wdm0) failed for connection 'att' > > >>> Oct 2 07:35:57 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0): > > >>> device > > >>> state change: failed -> disconnected (reason 'none') [120 30 0] > > >>> Oct 2 07:35:57 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0): > > >>> deactivating device (reason 'none') [0] > > >>> Oct 2 07:35:57 ken-x230 NetworkManager[15840]: <info> WWAN now > > >>> disabled > > >>> by management service > > >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> Modem disabling... > > >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: state changed (registered -> > > >>> disabling) > > >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: signal quality updated (0) > > >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: access technology changed (umts > > >>> -> > > >>> unknown) > > >>> Oct 2 07:35:57 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem > > >>> state changed, 'registered' --> 'disabling' (reason: user-requested) > > >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: 3GPP Registration state changed > > >>> (home -> unknown) > > >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> Modem fully > > >>> disabled... > > >>> Oct 2 07:35:57 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: state changed (disabling -> > > >>> disabled) > > >>> Oct 2 07:35:57 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem > > >>> state changed, 'disabling' --> 'disabled' (reason: user-requested) > > >>> Oct 2 07:35:59 ken-x230 anacron[22871]: Job `cron.daily' started > > >>> Oct 2 07:35:59 ken-x230 anacron[22968]: Updated timestamp for job > > >>> `cron.daily' to 2013-10-02 > > >>> Oct 2 07:35:59 ken-x230 cracklib: no dictionary update necessary. > > >>> Oct 2 07:36:01 ken-x230 NetworkManager[15840]: <info> Auto-activating > > >>> connection 'att'. > > >>> Oct 2 07:36:01 ken-x230 NetworkManager[15840]: <info> Activation > > >>> (cdc-wdm0) starting connection 'att' > > >>> Oct 2 07:36:01 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0): > > >>> device > > >>> state change: disconnected -> prepare (reason 'none') [30 40 0] > > >>> Oct 2 07:36:01 ken-x230 NetworkManager[15840]: <info> Activation > > >>> (cdc-wdm0) Stage 1 of 5 (Device Prepare) scheduled... > > >>> Oct 2 07:36:01 ken-x230 NetworkManager[15840]: <info> Activation > > >>> (cdc-wdm0) Stage 1 of 5 (Device Prepare) started... > > >>> Oct 2 07:36:01 ken-x230 NetworkManager[15840]: <info> Activation > > >>> (cdc-wdm0) Stage 1 of 5 (Device Prepare) complete. > > >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Simple connect > > >>> started... > > >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Simple connect > > >>> state > > >>> (3/10): Enable > > >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Modem enabling... > > >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: state changed (disabled -> > > >>> enabling) > > >>> Oct 2 07:36:01 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem > > >>> state changed, 'disabled' --> 'enabling' (reason: user-requested) > > >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: 3GPP Registration state changed > > >>> (unknown -> registering) > > >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: 3GPP Registration state changed > > >>> (unknown -> searching) > > >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <warn> Couldn't load > > >>> Operator Code: 'Current operator MCC/MNC is still unknown' > > >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <warn> Couldn't load > > >>> Operator Name: 'Current operator description is still unknown' > > >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: 3GPP Registration state changed > > >>> (registering -> home) > > >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: 3GPP Registration state changed > > >>> (home -> searching) > > >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Modem fully > > >>> enabled... > > >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: state changed (enabling -> > > >>> searching) > > >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Simple connect > > >>> state > > >>> (4/10): Wait to get fully enabled > > >>> Oct 2 07:36:01 ken-x230 ModemManager[1811]: <info> Simple connect > > >>> state > > >>> (5/10): Allowed mode > > >>> Oct 2 07:36:01 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem > > >>> state changed, 'enabling' --> 'searching' (reason: user-requested) > > >>> Oct 2 07:36:01 ken-x230 NetworkManager[15840]: <info> WWAN now enabled > > >>> by > > >>> management service > > >>> Oct 2 07:36:03 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: signal quality updated (92) > > >>> Oct 2 07:36:03 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: access technology changed > > >>> (unknown > > >>> -> umts) > > >>> Oct 2 07:36:04 ken-x230 ModemManager[1811]: <info> Simple connect > > >>> state > > >>> (6/10): Bands > > >>> Oct 2 07:36:04 ken-x230 ModemManager[1811]: <info> Simple connect > > >>> state > > >>> (7/10): Register > > >>> Oct 2 07:36:04 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: 3GPP Registration state changed > > >>> (searching -> registering) > > >>> Oct 2 07:36:04 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: 3GPP location updated (MCC: > > >>> '310', > > >>> MNC: '410', Location area code: '0', Cell ID: '0') > > >>> Oct 2 07:36:04 ken-x230 ModemManager[1811]: <info> Simple connect > > >>> state > > >>> (8/10): Bearer > > >>> Oct 2 07:36:04 ken-x230 ModemManager[1811]: <info> Simple connect > > >>> state > > >>> (9/10): Connect > > >>> Oct 2 07:36:04 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: state changed (searching -> > > >>> connecting) > > >>> Oct 2 07:36:04 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: 3GPP Registration state changed > > >>> (registering -> home) > > >>> Oct 2 07:36:04 ken-x230 ModemManager[1811]: <info> Modem > > >>> /org/freedesktop/ModemManager1/Modem/4: state changed (connecting -> > > >>> registered) > > >>> Oct 2 07:36:04 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem > > >>> state changed, 'searching' --> 'connecting' (reason: user-requested) > > >>> Oct 2 07:36:04 ken-x230 NetworkManager[15840]: <info> (cdc-wdm0) modem > > >>> state changed, 'connecting' --> 'registered' (reason: unknown) > > >>> > > >>> _______________________________________________ > > >>> networkmanager-list mailing list > > >>> networkmanager-list@gnome.org > > >>> https://mail.gnome.org/mailman/listinfo/networkmanager-list > > >> > > >> > > >> > > > > > > _______________________________________________ > networkmanager-list mailing list > networkmanager-list@gnome.org > https://mail.gnome.org/mailman/listinfo/networkmanager-list _______________________________________________ networkmanager-list mailing list networkmanager-list@gnome.org https://mail.gnome.org/mailman/listinfo/networkmanager-list
