I am just having a thought, is it because ModemManager uses a ModemManager1 dbus path and network-manager-0.9.2.0 doesn't support it ?
Regards Marc -----Original Message----- From: Marc Murphy Sent: 05 December 2013 22:28 To: 'networkmanager-list@gnome.org' Subject: NetworkManager and ModemManager Hello, I am trying to get NetworkManager and ModemManager to work together on an embedded system. There is no GUI so I have to use the config files to set everything up. Should network-manager-0.9.2.0 and modem-manager-0.7.990 work together using the dbus interface ? I just cant seem to make them talk to each other ! NetworkManager can see my eth0 device; # nmcli d DEVICE TYPE STATE eth0 802-3-ethernet unmanaged I have forced it to be unmamaged at the moment as I am running NFS and it will cause the boot connection to be lost and hang the system. ModemManager can see the modem; # mmcli -m 0 /org/freedesktop/ModemManager1/Modem/0 (device id '61d98ebe0deeb14a83d951229303f0e8a245cd35') ------------------------- Hardware | manufacturer: 'huawei' | model: 'EM820W' | revision: '11.809.05.80.00' | capabilities: 'gsm-umts' | current: 'gsm-umts' | equipment id: '354283040XXXXXX' ------------------------- System | device: '/sys/devices/platform/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.1' | drivers: 'option1' | plugin: 'Huawei' | primary port: 'ttyUSB3' ------------------------- Numbers | own : '+447539XXXXXX' ------------------------- Status | lock: 'none' | unlock retries: 'sim-pin (3), sim-pin2 (3), sim-puk (10), sim-puk2 (10)' | state: 'registered' | access tech: 'umts' | signal quality: '12' (recent) ------------------------- Modes | supported: '2g, 3g' | allowed: '2g, 3g' | preferred: '3g' ------------------------- Bands | supported: 'unknown' | current: 'unknown' ------------------------- 3GPP | imei: '35428304XXXXXXX' | enabled locks: 'none' | operator id: '23433' | operator name: 'Orange' | registration: 'home' ------------------------- SIM | path: '/org/freedesktop/ModemManager1/SIM/0' Should the two just talk to each other ? or do I need to set something up ? I would like to make NetworkManager automatically connect the modem and get an IP address so I can use the connection. Can anyone help me over this stumbling block please ? Thanks Marc _______________________________________________ networkmanager-list mailing list networkmanager-list@gnome.org https://mail.gnome.org/mailman/listinfo/networkmanager-list