Dear
I am experimenting with dynamic behaviour of NM with multiple networks and how 
handover occurs between WiFi/mobile network. I am moving away from the WiFi 
access point as far that the NM is unable to connect to the WiFi. NM is 
restarted and gets a connection to the mobile connection (lowest autoconnect 
priority). Afterwards, I am moving very close to the WiFi AP but NM doesn't 
connect to it.
If I execute "nmcli dev wifi list" after moving a little bit from the APs away, 
I get:*  SSID               MODE    CHAN  RATE       SIGNAL  BARS  SECURITY   
demo7              Infra   7     54 Mbit/s  22      ▂___  --   STATION          
  Infra   1     54 Mbit/s  14      ▂___  WPA2 802.1X   CONTROL            Infra 
  11    54 Mbit/s  17      ▂___  --   forge_wlan_inf4    Infra   64    54 
Mbit/s  25      ▂___  --   STATION            Infra   6     54 Mbit/s  19      
▂___  WPA2 802.1X   forge_wlan_inf5    Infra   100   54 Mbit/s  27      ▂___  
--   forge_wlan_inf3    Infra   56    54 Mbit/s  27      ▂___  --   
forge_wlan_adhoc3  Ad-Hoc  56    54 Mbit/s  27      ▂___  --   
forge_wlan_adhoc5  Ad-Hoc  100   54 Mbit/s  24      ▂___  --   
forge_wlan_adhoc5  Ad-Hoc  100   54 Mbit/s  25      ▂___  --   
forge_wlan_adhoc5  Ad-Hoc  100   54 Mbit/s  24      ▂___  --
This shows me that both station APs (SSID=STATION) have signal of 14% and 19%. 
If I am executing "Service network-manager restart" and again ask the WiFi 
signal level with "nmcli dev wifi list", I get:
*  SSID               MODE    CHAN  RATE       SIGNAL  BARS  SECURITY   
forge_wlan_inf4    Infra   64    54 Mbit/s  29      ▂___  --   forge_wlan_inf5  
  Infra   100   54 Mbit/s  29      ▂___  --   demo7              Infra   7     
54 Mbit/s  34      ▂▄__  --   forge_wlan_adhoc5  Ad-Hoc  100   54 Mbit/s  25    
  ▂___  --   forge_wlan_adhoc3  Ad-Hoc  56    54 Mbit/s  22      ▂___  --   
CONTROL            Infra   11    54 Mbit/s  27      ▂___  --   forge_wlan_inf3  
  Infra   56    54 Mbit/s  20      ▂___  --   STATION            Infra   1     
54 Mbit/s  22      ▂___  WPA2 802.1X*  STATION            Infra   6     54 
Mbit/s  35      ▂▄__  WPA2 802.1X
My robot is not moved but signal level after NM restart is noticeably higher 
than before. It seems that the signal level sticks to the percentages which 
have been measured at the beginning of my experiment.
Can someone help me with this issue?
Best regardsPieter Cardoen
                                          
_______________________________________________
networkmanager-list mailing list
[email protected]
https://mail.gnome.org/mailman/listinfo/networkmanager-list

Reply via email to