Hi! I have faced with a problem that eth0 is not initialized always at boot. I have traced the problem and now it seems that networkmanager (possibly??) ignores/does not notice udev add events. Ifconfig reports then only lo interface that is coming from /etc/network/interfaces.
Only following two lines related to eth0/ethernet are present in journal when problem hits: Jan 10 15:04:31 cpr3 kernel[437]: [ 1.061954] cpsw 4a100000.ethernet: Detected MACID = 50:72:24:bf:89:f0 Jan 10 15:04:31 cpr3 kernel[437]: [ 1.068965] cpsw 4a100000.ethernet: cpts: overflow check period 850 Then /sys/class/net/eth0 provides following responses: # cat /sys/class/net/eth0/carrier cat: read error: Invalid argument # cat /sys/class/net/eth0/uevent INTERFACE=eth0 IFINDEX=2 So, carrier is not initialized, but there has beed uevent add event! However, following lines get journaled from eth0/ethernet when everything is fine: Jan 10 15:04:34 cpr3 kernel[578]: [ 1.061927] cpsw 4a100000.ethernet: Detected MACID = 50:72:24:bf:89:f0 Jan 10 15:04:34 cpr3 kernel[578]: [ 1.068931] cpsw 4a100000.ethernet: cpts: overflow check period 850 Jan 10 15:04:37 cpr3 NetworkManager[534]: <info> devices added (path: /sys/devices/platform/ocp/4a100000.ethernet/net/eth0, iface: eth0) Jan 10 15:04:37 cpr3 NetworkManager[534]: <info> device added (path: /sys/devices/platform/ocp/4a100000.ethernet/net/eth0, iface: eth0): no ifupdown configuration found. Jan 10 15:04:38 cpr3 NetworkManager[534]: <info> keyfile: new connection /etc/NetworkManager/system-connections/eth0 (754f5a0d-0fcf-49c2-8e1a-4560502f38c1,"eth0") Jan 10 15:04:38 cpr3 NetworkManager[534]: <info> (eth0): new Ethernet device (carrier: OFF, driver: 'cpsw', ifindex: 2) Jan 10 15:04:38 cpr3 NetworkManager[534]: <info> (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Jan 10 15:04:38 cpr3 kernel: net eth0: initializing cpsw version 1.12 (0) Jan 10 15:04:38 cpr3 kernel: net eth0: initialized cpsw ale version 1.4 Jan 10 15:04:38 cpr3 kernel[578]: [ 19.947868] net eth0: initializing cpsw version 1.12 (0) Jan 10 15:04:38 cpr3 kernel[578]: [ 19.953477] net eth0: initialized cpsw ale version 1.4 Jan 10 15:04:38 cpr3 kernel: net eth0: ALE Table size 1024 Jan 10 15:04:38 cpr3 kernel[578]: [ 19.970013] net eth0: ALE Table size 1024 Jan 10 15:04:38 cpr3 kernel: net eth0: phy found : id is : 0x7c0f1 Jan 10 15:04:38 cpr3 kernel[578]: [ 19.989109] net eth0: phy found : id is : 0x7c0f1 Jan 10 15:04:42 cpr3 kernel: cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx Jan 10 15:04:42 cpr3 kernel[578]: [ 24.034502] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx Jan 10 15:04:42 cpr3 NetworkManager[534]: <info> (eth0): link connected Jan 10 15:04:42 cpr3 NetworkManager[534]: <info> (eth0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40] Jan 10 15:04:42 cpr3 NetworkManager[534]: <info> Auto-activating connection 'eth0'. Jan 10 15:04:42 cpr3 NetworkManager[534]: <info> (eth0): Activation: starting connection 'eth0' (754f5a0d-0fcf-49c2-8e1a-4560502f38c1) Jan 10 15:04:43 cpr3 NetworkManager[534]: <info> (eth0): device state change: disconnected -> prepare (reason 'none') [30 40 0] Jan 10 15:04:43 cpr3 NetworkManager[534]: <info> (eth0): device state change: prepare -> config (reason 'none') [40 50 0] Jan 10 15:04:43 cpr3 NetworkManager[534]: <info> (eth0): device state change: config -> ip-config (reason 'none') [50 70 0] Jan 10 15:04:43 cpr3 NetworkManager[534]: <info> Activation (eth0) Beginning DHCPv4 transaction (timeout in 45 seconds) Jan 10 15:04:43 cpr3 NetworkManager[534]: <info> (eth0): DHCPv4 state changed unknown -> bound Then /sys/class/net/eth0 provides following responses: cat /sys/class/net/eth0/carrier 1 # cat /sys/class/net/eth0/uevent INTERFACE=eth0 IFINDEX=2 I iserted /etc/udev/scripts/network.sh debug printing from every event and it looks lit it prints both lo and eth0 interfaces at every boot. What else/where could I check check? I'm running linux kernel version 4.4/networkmanager 1.0.10 on am335x based board. Thanks, Matti
_______________________________________________ networkmanager-list mailing list networkmanager-list@gnome.org https://mail.gnome.org/mailman/listinfo/networkmanager-list
