----- Original Message ----- From: "Marco Fortini" <[EMAIL PROTECTED]> To: "Mailing list Linux" <[EMAIL PROTECTED]> Sent: Thursday, January 03, 2002 10:21 PM Subject: [newbie-it] Installazione di un driver
>Ho scaricato da rete dei file spacciati per driver linux del modem ADSL Speed Touch >USB dal sito dell'Alcatel; >si chiamano "COPYING", COPYING.GPL", "INSTALL", "MAKEFILE" e "SPEEDTOUCH.C". hai scaricato i sorgenti da compilare!! >2. Kernel Configuration >This driver is only supported on kernel 2.4.1 and higher. >You will need to install this kernel with the following options enabled: >- Code maturity level options / Prompt for development and/or incomplete code/drivers >- USB support / Support for USB >- USB support / Preliminary USB device filesystem >- Networking options / Asynchronous Transfer Mode (ATM) (EXPERIMENTAL) devi ricompilare il kernel abilitando le voci riportate sopra, è molto chiaro >3. Compiling the module >You will need SARLib-0.2.1 to compile this module. >You can download this library at: >http://sarlib.sourceforge.net/ ti avvisa della necessità delle sarlib e ti dice dove scaricarle.. >Extract the SARLib in the same directory as this package. >Make sure your new 2.4.1+ kernel is in /usr/src/linux/ >If it is not the case, you can also modify the path in the Makefile >Then type: >make >then become root and type: >make install quidi ti dice di decomprimerle e compilarle con i soliti comandi.. >4. PPPoE >Installing PPPoE is the easiest. >First, install rfc 2684 Bridged ethernet support. This will allow you to do >Ethernet over ATM. >You can download this software from >http://home.sch.bme.hu/~cell/br2684/ poi ti avvisa che ti serve PPPoE >Follow the instructions on this site. (the TUTORIAL file) >If you want this to be included in your startup you can add the appropriate >line in the /etc/hotplug/usb/speedtouch file after the startup of the >management application. >When you have your bridging ethernet interface (nas0) you can install a >PPPoE client. For example, I used roaring penguin PPPoE. >http://www.roaringpenguin.com/pppoe/ >The version 2.8 supports kernel-level PPPoE support too. (see webpage) >Do not forget to provide 'nas0' as interface name to the rp-pppoe config. e ti spiega da dove e come installare.. ..considera che se non esistono rpm precompilati i moduli binari sono il massimo, ma richiedono alcune librerie (comunque PPPoE in mdk 8.0 dovrebbe esserci), il problem(ino) è il kernel, il supporto a ppp over ethernet non (credo) dovrebbe essere previsto di default (ma forse ce l'hai come modulo) quello all'USB c'è di sicuro , non credo invece che tu abbia l'ATM e quindi il ppp over atm... alle brutte ti basta ricompilare, in fondo non era così complicato!! .. PS: è una fortuna (per GNU/Linux) che alcune case rilascino i sorgenti dei drivers e dei moduli dei propri dispositivi, guarda il caso del mio modem ESS!! non ci sono i sorgenti, e per navigare devo usare M$ o un secondo PC che mi fa da router a da NAT!! bye miKe --- ________________________________ slack8 GNU/Linux 2.4.16-pk @ hp XE3 RU# 219755 - SRU# 705 - RM# 110932 -- Prendi GRATIS l'email universale che... risparmia: http://www.email.it/f Sponsor: Le tariffe Tele2 sono sempre più vantaggiose e telefonare ti costa sempre meno! Diventa nuovo cliente online e telefonerai GRATIS per 3ore!! Trova la convenienza su Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=120&d=6-1