sto cercando di far funzionare ddclient, ma ricevo questa risposta: [EMAIL PROTECTED] giacomo]# /usr/sbin/ddclient WARNING: unable to determine IP address
il file di configurazione l'ho postato in allegato Grazie -- --- ---- Giacomo Piva -- http://members.ferrara.linux.it/giacomo.p/ FerraraLUG -- http://www.ferrara.linux.it DeepSpace6 -- http://deepspace6.net ---- --- -- ICQ #Uin: 173565743 GnuPG fp: 6365 91F4 C112 BB34 B42C 8D93 5C8B 0931 ACD5 DB96 -- 365 91F4 C112 BB34 B42C 8D93 5C8B 0931 ACD5 DB96 --
###################################################################### ## ## Define default global variables with lines like: ## var=value [, var=value]* ## These values will be used for each following host unless overridden ## with a local variable definition. ## ## Define local variables for one or more hosts with: ## var=value [, var=value]* host.and.domain[,host2.and.domain...] ## ## Lines can be continued on the following line by ending the line ## with a \ ## ###################################################################### #daemon=300 # check every 300 seconds syslog=yes # log update msgs to syslog mail=root # mail update msgs to root pid=/var/run/ddclient.pid # record PID in file. # #use=watchguard-soho, fw=192.168.111.1:80 # via Watchguard's SOHO FW #use=netopia-r910, fw=192.168.111.1:80 # via Netopia R910 FW #use=smc-barricade, fw=192.168.123.254:80 # via SMC's Barricade FW #use=netgear-rt3xx, fw=192.168.0.1:80 # via Netgear's internet FW #use=linksys, fw=192.168.1.1:80 # via Linksys's internet FW #use=maxgate-ugate3x00, fw=192.168.0.1:80 # via MaxGate's UGATE-3x00 FW #use=elsa-lancom-dsl10, fw=10.0.0.254:80 # via ELSA LanCom DSL/10 DSL Router #use=elsa-lancom-dsl10-ch01, fw=10.0.0.254:80 # via ELSA LanCom DSL/10 DSL Router #use=elsa-lancom-dsl10-ch02, fw=10.0.0.254:80 # via ELSA LanCom DSL/10 DSL Router #use=alcatel-stp, fw=10.0.0.138:80 # via Alcatel Speed Touch Pro #use=xsense-aero, fw=192.168.1.1:80 # via Xsense Aero Router #fw-login=admin, fw-password=XXXXXX # FW login and password # ## To obtain an IP address from FW status page (using fw-login, fw-password) #use=fw, fw=192.168.1.254/status.htm, fw-skip='IP Address' # found after IP Address # ## To obtain an IP address from Web status page (using the proxy if defined) #use=web, web=checkip.dyndns.org/, web-skip='IP Address' # found after IP Address # #use=ip, ip=127.0.0.1 # via static IP's #use=if, if=eth0 # via interfaces #use=web # via web # protocol=dyndns2 # default protocol #proxy=fasthttp.sympatico.ca:80 # default proxy server=members.dyndns.org # default server #server=members.dyndns.org:8245 # default server (bypassing proxies) login=abadir # default login password=******** # default password #mx=mx.for.your.host # default MX #backupmx=yes|no # host is primary MX? #wildcard=yes|no # add wildcard CNAME? ## ## dyndns.org dynamic addresses ## ## (supports variables: wildcard,mx,backupmx) ## server=members.dyndns.org, \ protocol=dyndns2 \ abadir.homeip.net.dyndns.org ## ## dyndns.org static addresses ## ## (supports variables: wildcard,mx,backupmx) ## # static=yes \ # server=members.dyndns.org, \ # protocol=dyndns2 \ # your-static-host.dyndns.org ## ## ## dyndns.org custom addresses ## ## (supports variables: wildcard,mx,backupmx) ## # custom=yes \ # server=members.dyndns.org, \ # protocol=dyndns2 \ # your-domain.top-level,your-other-domain.top-level ## ## ZoneEdit (zoneedit.com) ## # server=www.zoneedit.com, \ # protocol=zoneedit1, \ # login=your-zoneedit-login, \ # password=your-zoneedit-password \ # your.any.domain,your-2nd.any.dom ## ## EasyDNS (easydns.com) ## # server=members.easydns.com, \ # protocol=easydns, \ # login=your-easydns-login, \ # password=your-easydns-password \ # your.any.domain,your-2nd.any.domain ## ## Hammernode (hn.org) dynamic addresses ## # server=dup.hn.org, \ # protocol=hammernode1, \ # login=your-hn-login, \ # password=your-hn-password \ # your-hn-host.hn.org,your-2nd-hn-host.hn.org ## ## dslreports.com dynamic-host monitoring ## # server=members.dslreports.com \ # protocol=dslreports1, \ # login=dslreports-login, \ # password=dslreports-password \ # dslreports-unique-id
