I also have similiar problems with my via-rhine dlink dfe-530 tx NIC. I have
tried
1. using the built in driver but the card can not be found by the probe
during installation
2.downloading the driver source code compiling.
after which I then configure the card and eth0 setting
All of these cause errors, usually the card can not be initialised during
bootup.
Weeks later I gave up and bought a 3com NIC and NO MORE problems.
If you decide to continue here is the source code
http://cesdis.gsfc.nasa.gov/linux/drivers/via-rhine.c
and a really good starting point for all NIC problems any brand or model.
http://cesdis.gsfc.nasa.gov/linux/drivers/
good luck
Steve
p.s. if you do get it to work let the list know
----- Original Message -----
From: Lolo F. <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, August 08, 1999 3:51 AM
Subject: [newbie] Module.
> Hi.
>
> I've got a problem with my net card at boot time when the system tries to
load
> the module (via-rhine.o). It isn't loaded since I get some "unresolved
symbol"
> errors. This problem appears when I also try to load ppp.o. How can I
solve
> this problem ? Thank you.
>
> ____________________________________________________________________
> Get free e-mail and a permanent address at http://www.netaddress.com/?N=1
>
