On Thu, 19 Aug 1999, Steve Philp wrote:

> Sengir wrote:
> > 
> > Hello,
> > 
> > Everything went well with the steps below except for one part.  When I do
> > the rebuild as follows:
> > 
> > rpm --rebuild Device3Dfx-2.2-3.src.rpm
> > 
> > And I try to execute the following command the file isn't present in that
> > directory. (I made sure I had the case correct in the directory names)
> > 
> > rpm -Uvh /usr/src/RPM/RPMS/i386/Device3Dfx-2.2-3.i386.rpm
> > 
> > Where is it going?
> > 
> > Also, if I get the GUI working at 640X480 and install the src file through
> > kpackage will it rebuild it and install it all in one shot?
> > 
> > Just continuing my barrage of questions...
> > 
> > Brian :)
> > 
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]]On Behalf Of RReed
> > Sent: Wednesday, August 18, 1999 5:40 PM
> > To: [EMAIL PROTECTED]
> > Subject: Re: [newbie] Linux Voodoo3 Help
> > 
> > Below is what Scott Worley sent me and it helped alot on the setup of my
> > voodoo3
> > One extra thing.. make sure you installed vga16 server and not svga server
> > Before you do any of this!!!!!
> > I believe you can reconfig your linux for the vga16 server in the
> > xconfigurator.
> > then refer to the below instructions.
> > 
> > ************ Start voodoo3 installation text *******************
> > I've used the same card recently. 3dfx has a link on their site under
> > drivers
> > to the site http://glide.xxedgexx.com which has the RPM's you will need to
> > download.  I downloaded the following:
> > 
> > Glide_V3-2.60-6.i386.rpm
> > Device3Dfx-2.2-3.src.rpm  This is optional but recommended
> > XFree86_3DFX-SVGA-3.3.3-5.i386.rpm
> > XFree86_3DFX-XF86Setup-3.3.3-5.i386.rpm
> > 
> > I did:
> > rpm -Uvh Glide_V3-2.60-6.i386.rpm
> > 
> > for the next command you need the C compiler/libs to be installed
> > rpm --rebuild Device3Dfx-2.2-3.src.rpm
> > rpm -Uvh /usr/src/RPM/RPMS/i386/Device3Dfx-2.2-3.i386.rpm
> 
> That should be:
> 
>       rpm -Uvh /usr/src/redhat/RPMS/i386/Device*.rpm
> 
 
Just watch for 
wrote: /usr/src/something
it's right at the end give or take 5 lines 

--
MandrakeSoft          http://www.mandrakesoft.com/
                                        --Axalon

Reply via email to