I am down on my last leg here. I have been working at this for about two weeks now and I am at a stand still. So any help or direction would be much appreciated. Here is what I have so far.
I have been trying to create a Kernel Loadable Module to test out Linux support for hardware raid. Since I already have an IDE Raid controller built in, and I haven't touched it since converting from the dreaded W*nblows about a year ago. OS: Mandrake 9.0 Hardware: Mobo: A-BIT KT7A-RAID with an HPT370 raid chipset. Drives: 4 2.5G drives in RAID Zero configed hardware side I downloaded the latest driver pack from Highpint-tech @ http://www.highpoint-tech.com/370drivers_down.htm I was able to downlaod the source for these drivers and followed the basic "readme" file, but I am still lost on trying to get it to start on boot. Another problem I have run into is that when I do load the driver(insmod ./hpt37x2.0) it duplicates the drives already found by the basic ide driver. example. /dev/hde /dev/hdf /dev/hdg /dev/hdh with /dev/sc0 /dev/sc1 /dev/sc2 /dev/sc3 (I believe, since I can't get it to compile right anymore even with clearing workarea and backtracking all the changes I have made to /etc/modules.*) besides http://rtfm.mit.edu,,, is there another manual/website that might be of help? Thanks to all that will help, Brian Metzler **Newbie** The Linux gods don't have favor with me this week. I must sacrifice more fish!.!. Any suggestions which type the gods like the most?
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com