On Tuesday 18 February 2003 10:11 am, [EMAIL PROTECTED] wrote: > in etc/hosts there are 2 entry 192.168.254.10 (ip address of NIC) and > 127.0.0.1 > > in etc/hosts.allow and etc/hosts.deny are empty >
you need to add 192.168.254.17 and the name of the computer to /etc/hosts and restart the network > > From: et <[EMAIL PROTECTED]> > > Date: 2003/02/18 Tue PM 02:15:59 GMT > > To: [EMAIL PROTECTED] > > Subject: Re: Re: [newbie] Ethernet Interface > > > > what does /etc/hosts and /etc/hosts.allow and /etc/host.deny say? > > > > On Tuesday 18 February 2003 07:59 am, [EMAIL PROTECTED] wrote: > > > i ran the mandrake wizard and i have now ip address 192.168.254.10 on > > > eht0 and eht0 is up. to test the card I ping 192.168.254.10 and it does > > > reply correctly, then i plugged it into a hub where i have an other > > > machine with an ip address 192.168.254.17. Both machine can't see each > > > other, if i try to ping 192.168.254.17 from 192.168.254.10 it does not > > > work. > > > > > > > From: Derek Jennings <[EMAIL PROTECTED]> > > > > Date: 2003/02/18 Tue AM 11:59:20 GMT > > > > To: [EMAIL PROTECTED] > > > > Subject: Re: Re: [newbie] Ethernet Interface > > > > > > > > On Tuesday 18 Feb 2003 10:01 am, [EMAIL PROTECTED] wrote: > > > > > hi, > > > > > my system: > > > > > > > > > > processor athlon xp 1800 > > > > > motherboard ECS K7S6A with SiS745 chipsets > > > > > memory 250Mb DDR > > > > > soundcard integrated to the motherboard sis7012 PCI > > > > > 2 NIC realtek RTL8139 > > > > > videocard sis315 > > > > > router from british telecom (BT 5861 router) with NAT > > > > > > > > > > JP > > > > > > > > > > > From: Greg Meyer <[EMAIL PROTECTED]> > > > > > > Date: 2003/02/17 Mon PM 11:19:38 GMT > > > > > > To: [EMAIL PROTECTED] > > > > > > Subject: Re: [newbie] > > > > > > > > > > > > -----BEGIN PGP SIGNED MESSAGE----- > > > > > > Hash: SHA1 > > > > > > > > > > > > On Monday 17 February 2003 05:57 pm, [EMAIL PROTECTED] wrote: > > > > > > > thanks for your reply derek > > > > > > > > > > > > > > yes my system is working with win2000. > > > > > > > here's my ifconfig eth0 > > > > > > > eth0 Link encap:Ethernet HWaddr 00:50:BF:33:58:03 > > > > > > > Broadcast Multicast MTU:1500 Metric:1 > > > > > > > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > > > > > > > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > > > > > > > collisions:0 txqueuelen:100 > > > > > > > RX bytes:0 (0.0b) TX bytes:0 (0.0 b) > > > > > > > Interrupt:5 Base Address:0x8000 > > > > > > > > Well the Interface is not UP, and you do not have an IP address > > > > Type > > > > ifconfig eth0 192.168.1.44 (for example) in a root terminal followed > > > > by ifup eth0 > > > > > > > > Did you go through the networking wizard in Mandrake Control Centre? > > > > That should set it up correctly. > > > > > > > > derek > > > > > > > > > > > > -- > > > > ---------------------------------- > > > > www.jennings.homelinux.net > > > > > > > > > > > > Want to buy your Pack or Services from MandrakeSoft? > > > > Go to http://www.mandrakestore.com > > > > Want to buy your Pack or Services from MandrakeSoft? > > Go to http://www.mandrakestore.com
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
