I have some problems to load the FireWire modules during the boot. What is strange is that it used to work well.
Here are the error messages from syslog: kernel: devfs_register(raw1394): could not append to parent, err: -17 kernel: ieee1394: sbp2: Error logging into SBP-2 device - login failed kernel: ieee1394: sbp2: sbp2_login_device failed
I didn't find what err -17 means and how to fix it. I enclosed more lines of my syslog file at the end of the message.
The consequence of the error is that the /dev/sda* nodes are not created. So, I can not access to my external FireWire hard drive.
Then, if I plug the HD, I have the following message, which looks OK:
kernel: ohci1394_0: SelfID received outside of bus reset sequence
kernel: ieee1394: sbp2: Logged into SBP-2 device
kernel: ieee1394: sbp2: Node[01:1023]: Max speed [S400] - Max payload [2048]
/etc/hotplug/ieee1394.agent: Setup sbp2 for IEEE1394 product 0x00309e/0x00609e/0x010483
This used to work on my Mandrake 9.0, so there should be a solution.
Thank your for the help Julien
Syslog:
[...]
kernel: ohci1394: $Rev: 530 $ Ben Collins <[EMAIL PROTECTED]>
kernel: PCI: Found IRQ 10 for device 02:0f.2
kernel: PCI: Sharing IRQ 10 with 00:1f.2
kernel: PCI: Sharing IRQ 10 with 02:06.0
kernel: PCI: Sharing IRQ 10 with 02:06.1
kernel: PCI: Sharing IRQ 10 with 02:0f.0
kernel: PCI: Sharing IRQ 10 with 02:0f.1
kernel: ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[f8ffc800-f8ffd000] Max Packet=[2048]
kernel: devfs_register(raw1394): could not append to parent, err: -17
kernel: raw1394: /dev/raw1394 device initialized
kernel: i2c-core.o: i2c core module version 2.6.4 (20020719)
Aug 23 10:17:10 julien kernel: i2c-proc.o version 2.6.4 (20020719)
kernel: hdb: Disabling (U)DMA for SAMSUNG CD-ROM SN-124
kernel: hdb: ATAPI 24X CD-ROM drive, 128kB Cache
julien kernel: Uniform CD-ROM driver Revision: 3.12
kernel: ieee1394: Host added: Node[00:1023] GUID[464fc0003018a810] [Linux OHCI-1394]
kernel: ieee1394: Device added: Node[01:1023] GUID[00309e510e000bd8] [BAFO]
kernel: kjournald starting. Commit interval 5 seconds
kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kernel: ieee1394: sbp2: Error logging into SBP-2 device - login failed
kernel: ieee1394: sbp2: sbp2_login_device failed
kernel: scsi1 : IEEE-1394 SBP-2 protocol driver (host: ohci1394)
kernel: $Rev: 530 $ James Goodwin <[EMAIL PROTECTED]>
kernel: SBP-2 module load options:
kernel: - Max speed supported: S400
kernel: - Max sectors per I/O supported: 255
kernel: - Max outstanding commands supported: 8
kernel: - Max outstanding commands per lun supported: 1
julien kernel: - Serialized I/O (debug): no
kernel: - Exclusive login: yes
[...]
/etc/hotplug/pci.agent: ... blacklisted module: usb-uhci
nfslock: Démarrage de rpc.lockd succeeded
kernel: uhci.c: USB Universal Host Controller Interface driver v1.1
insmod: /lib/modules/2.4.19-16mdk/kernel/drivers/usb/uhci.o.gz: init_module: No such device
insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg
Aug 23 10:17:11 julien modprobe: modprobe: insmod /lib/modules/2.4.19-16mdk/kernel/drivers/usb/uhci.o.gz failed
modprobe: modprobe: insmod uhci failed
/etc/hotplug/pci.agent: ... can't load module uhci
/etc/hotplug/pci.agent: missing kernel or user mode driver uhci
[...]
Loading module: nvidia
Loading module: scsi_hostadapter
Loading module: ohci1394
Loading module: raw1394
Loading module: i2c-proc
/etc/hotplug/ieee1394.agent: Setup sbp2 for IEEE1394 product 0x00309e/0x00609e/0x010483
[...]
pcmcia: Starting PCMCIA services:
/etc/hotplug/pci.agent: pcimodules is scanning more than ...
cardmgr[745]: watching 2 sockets
pcmcia: done.
pcmcia: cardmgr[745]: watching 2 sockets
cardmgr[760]: starting, version is 3.2.0
[...]
automount[1497]: starting automounter version 4.0.0, path = /misc, maptype = file, mapname = /etc/auto.misc
automount[1497]: Map argc = 1
automount[1497]: Map argv[0] = /etc/auto.misc
automount[1507]: starting automounter version 4.0.0, path = /net, maptype = program, mapname = /etc/auto.net
automount[1507]: Map argc = 1
automount[1507]: Map argv[0] = /etc/auto.net
autofs: Démarrage de automount succeeded
automount[1497]: mount(bind): bind_works = 1
automount[1497]: using kernel protocol version 4
automount[1497]: using timeout 60 seconds; freq 15 secs
automount[1507]: mount(bind): bind_works = 1
loadkeys: Loading /usr/lib/kbd/keymaps/i386/azerty/fr-latin1.kmap.gz
automount[1507]: using kernel protocol version 4
automount[1507]: using timeout 60 seconds; freq 15 secs
[...]
devfsd[127]: read config file: "/etc/devfsd.conf"
devfsd: Actions devfsd actives: succeeded
[...]
diskdrake[3390]: found mounted partition on hdb with /mnt/cdrom
diskdrake[3390]: found mounted partition on scd0 with /mnt/cdrom2
diskdrake[3390]: found mounted partition on sda1 with /mnt/fire1
diskdrake[3390]: found mounted partition on sda5 with /mnt/fire2
diskdrake[3390]: found mounted partition on sda6 with /mnt/fire3
diskdrake[3390]: found mounted partition on sda7 with /mnt/fire4
diskdrake[3390]: found mounted partition on sda8 with /mnt/fire5
[...]
diskdrake[3390]: found mounted partition on none with /mnt/fire1
diskdrake[3390]: found mounted partition on none with /mnt/fire2
diskdrake[3390]: found mounted partition on none with /mnt/fire3
diskdrake[3390]: found mounted partition on none with /mnt/fire4
diskdrake[3390]: found mounted partition on none with /mnt/fire5
[...]
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
