Hi all, I have a Pinnacle PCTV tv card. I have tried configuring this card by putting the right lines in the modules.conf file, but I can't get any channels listed. Now I removed the lines from modules.conf and did a rmmod bttv. After that I did modprobe bttv. Dmesg than gave the following output:
bttv: driver version 0.7.100 loaded bttv: using 4 buffers with 2080k (8320k total) for capture bttv: Host bridge is VIA Technologies, Inc. VT8377 [KT400 AGP] Host Bridge bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 00:08.0, irq: 19, latency: 32, mmio: 0xdddfe000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,autodetected] tda9887: probing bt848 #0 i2c adapter [id=0x10005] tda9887: chip found @ 0x86 bttv0: i2c attach [client=tda9887,ok] tuner: probing bt848 #0 i2c adapter [id=0x10005] tuner: chip found @ 0xc0 bttv0: i2c attach [client=(tuner unset),ok] bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: pinnacle/mt: id=1 info="PAL / mono" radio=no tuner: type set to 33 (MT2032 universal) MT2032: Companycode=3cbf Part=42 Revision=46 not a MT2032. bttv0: using tuner=33 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: PLL: 28636363 => 35468950 ... ok bttv0: registered device video0 bttv0: registered device vbi0 I think this is correct, although I'm not sure. But no matter what I do, I can't get any channels listed. Not even get a full screen with snow. Al I get is a tv screen that's mostly black or blue or green and a little edge with snow on the upper side. Check out the screenshot on: http://members1.chello.nl/~b.meersma/xawtv.png I'm trying this all on Mandrake 9.1. And there's no problem in the cable, because in Windows it does work. Could someone help me with this please. Kind Regards, Bert Meersma
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com