On Saturday 20 December 2003 14:18, Linux wrote:
> My computer is silent....
>
>
> The mobo is an Intel D865GBF (www.intel.com/design/motherbd/bf). I
> am using the onboard sound.
>
> It works fine under Windows98SE.
>
> I use Enlightenment, and I can enable sounds under E, but I don't
> hear anything. I can also see that esd is running if I run top or
> kpm.
>
> Yes I have turned up the volume in Kmix, and Aumix and alsamixer.
>
> Yes I have run the configuration tool in Drake Configure.
>
> Below are various commands and their outputs.
>
> lspcidrake -v | fgrep AUDIO:
> snd-intel8x0 : Intel Corp.|82801EB AC'97 Audio [MULTIMEDIA_AUDIO]
> (vendor:8086 device:24d5 subv:8086 subd:e001)
>
> grep sound-slot /etc/modules.conf:
> alias sound-slot-0 snd-intel8x0
>
> /sbin/lsmod:
> Module Size Used by Not tainted
> sg 34636 0 (autoclean)
> parport_pc 25096 1 (autoclean)
> lp 8096 0 (autoclean)
> parport 34176 1 (autoclean) [parport_pc lp]
> agpgart 40896 6 (autoclean)
> snd-seq-oss 31104 0 (unused)
> snd-seq-midi-event 5640 0 [snd-seq-oss]
> snd-seq 42608 2 [snd-seq-oss snd-seq-midi-event]
> snd-pcm-oss 43556 1
> snd-mixer-oss 14488 0 [snd-pcm-oss]
> snd-intel8x0 21988 1
> snd-ac97-codec 40160 0 [snd-intel8x0]
> snd-pcm 77536 0 [snd-pcm-oss snd-intel8x0]
> snd-timer 18376 0 [snd-seq snd-pcm]
> snd-mpu401-uart 4396 0 [snd-intel8x0]
> snd-rawmidi 17600 0 [snd-mpu401-uart]
> snd-seq-device 5832 0 [snd-seq-oss snd-seq snd-rawmidi]
> snd-page-alloc 7732 0 [snd-intel8x0 snd-pcm]
> snd 40868 0 [snd-seq-oss snd-seq-midi-event
> snd-seq snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-ac97-codec snd-pcm
> snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device] soundcore
> 6276 0 [snd] ppp_async 9216 0 (unused)
> ppp_generic 24060 0 [ppp_async]
> slhc 6564 0 [ppp_generic]
> af_packet 14952 0 (autoclean)
> e100 56964 1 (autoclean)
> supermount 15296 4 (autoclean)
> ide-cd 33856 0
> cdrom 31648 0 [ide-cd]
> ide-scsi 11280 0
> ehci-hcd 18568 0 (unused)
> usb-uhci 24652 0 (unused)
> usbcore 72992 1 [ehci-hcd usb-uhci]
> rtc 8060 0 (autoclean)
> reiserfs 175120 2
> sd_mod 11548 0 (unused)
> aic7xxx 120860 0 (unused)
> scsi_mod 91796 4 [sg ide-scsi sd_mod aic7xxx]
>
> /sbin/chkconfig --list sound:
> sound 0:off 1:off 2:on 3:on 4:on 5:on 6:off
>
> /sbin/chkconfig --list alsa:
> alsa 0:off 1:off 2:on 3:on 4:on 5:on 6:off
>
> /sbin/chkconfig --list alsa:
> vol 100, 100, P
> pcm 100, 100
> speaker 100, 100
> line 100, 100, P
> mic 100, 100, R
> cd 100, 100, P
> igain 100, 100
> line1 100, 100, P
> phin 100, 100, P
> video 100, 100, P
>
>
> /sbin/fuser -v /dev/dsp:
> USER PID ACCESS COMMAND
> /dev/dsp skippi 1841 f.... wavplay
It seems /dev/dsp is used by wavplay. Wavplay is part of xcdroast
according to 'urpmf wavplay'.
> Any thoughts?? Thank you very much.
> Adrian
Well it's a late reply and probably not very helpful but at least your
soundcard is detected and the ALSA drivers are loaded. How about
logging in to KDE to test sound? Also, do applications 'appear' to
play, like a moving progress indicator?
Good luck!
-Frans
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
