I usually use gcombust to burn cds and haven't had any problems. Now I'm trying to burn a SVCD and I'm getting the following...Can anyone help?
[EMAIL PROTECTED] 001]# cdrdao write -v 2 --device 0,0,0 svcd.cue Cdrdao version 1.1.7 - (C) Andreas Mueller <[EMAIL PROTECTED]> SCSI interface library - (C) Joerg Schilling Paranoia DAE library - (C) Monty Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables. Using libscg version 'andreas-0.5-UNIXWARE_Patch' 0,0,0: HL-DT-ST RW/DVD GCC-4240N Rev: D110 ERROR: No driver found for 'HL-DT-ST RW/DVD GCC-4240N', available drivers: cdd2600 generic-mmc generic-mmc-raw plextor plextor-scan ricoh-mp6200 sony-cdu920 sony-cdu948 taiyo-yuden teac-cdr55 toshiba yamaha-cdr10x For all recent recorder models either the 'generic-mmc' or the 'generic-mmc-raw' driver should work. Use option '--driver' to force usage of a driver, e.g.: --driver generic-mmc ERROR: Cannot setup device 0,0,0. [EMAIL PROTECTED] 001]# cdrdao write -v 2 --driver generic-mmc --device 0,0,0 --speed 4 svcd.cue Cdrdao version 1.1.7 - (C) Andreas Mueller <[EMAIL PROTECTED]> SCSI interface library - (C) Joerg Schilling Paranoia DAE library - (C) Monty Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables. Using libscg version 'andreas-0.5-UNIXWARE_Patch' 0,0,0: HL-DT-ST RW/DVD GCC-4240N Rev: D110 Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0000) Starting write at speed 4... Pausing 10 seconds - hit CTRL-C to abort. Process can be aborted with QUIT signal (usually CTRL-\). Turning BURN-Proof on Executing power calibration... Power calibration successful. ?: Input/output error. : scsi sendcmd: no error CDB: 2A 00 FF FF FF 6A 00 00 1A 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.002s timeout 180s ERROR: Write data failed. ERROR: Writing failed.
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
