On Tuesday 23 March 2004 08:01 pm, Marc Resnick wrote:
> My synaptics driver for my touchpad will work after a fresh reboot,
> because I added evdev to modules.preload. But as soon as I plug my
> regular mouse in, the touchpad will cease to work until I reboot again.
> I try modprobe evdev, but there is no change. My XFree86 config is
> correct, because it worked fine before I upgraded from the 2.6.2 to
> 2.6.3 kernel. I checked it to make sure it was the same.
>
> Any suggestions?
>
Here are my input device sections of XF86Config-4.

Section "InputDevice"
    Identifier "Mouse1"
    Driver "synaptics"
    Option "Protocol" "auto-dev"
    Option "Device" "/dev/psaux"
    Option "MaxSpeed" "0.18"
    Option "MinSpeed" "0.02"
    Option "BottomEdge" "4000"
    Option "SHMConfig" "on"
    # Option "Repeater"      "/dev/ps2mouse"
    Option "LeftEdge" "1900"
    Option "FingerLow" "25"
    Option "MaxTapTime" "180"
    Option "MaxTapMove" "220"
    Option "FingerHigh" "30"
    Option "VertScrollDelta" "100"
    Option "TopEdge" "1900"
    Option "RightEdge" "5400"
    Option "AccelFactor" "0.0010"
EndSection

Section "InputDevice"
    Identifier "Mouse2"
    Driver "mouse"
    Option "Protocol" "ExplorerPS/2"
    Option "Device" "/dev/mouse"
    Option "ZAxisMapping" "4 5"
EndSection
-- 
/g

____________________________________________________
Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
____________________________________________________

Reply via email to