I tried to burn a cd using cdrecord and got the output below. Hints welcome, I've got to clean my HD!
[EMAIL PROTECTED] beck]# cdrecord -v -audio -pad speed=4 dev=0,0,0 *.wav Cdrecord 2.0 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling TOC Type: 0 = CD-DA scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.24 Using libscg version 'schily-0.7' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'IDE-CD ' Identifikation : 'R/RW 4x4x24 ' Revision : '1.04' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC SWABAUDIO Supported modes: TAO PACKET RAW/R16 Drive buf size : 1572864 = 1536 KB FIFO size : 4194304 = 4096 KB Track 01: audio 41 MB (04:05.93) no preemp Track 02: audio 45 MB (04:31.02) no preemp Track 03: audio 28 MB (02:48.06) no preemp Track 04: audio 52 MB (05:09.80) no preemp Track 05: audio 57 MB (05:39.66) no preemp Track 06: audio 57 MB (05:42.00) no preemp Track 07: audio 33 MB (03:16.24) no preemp Track 08: audio 50 MB (04:58.66) no preemp Track 09: audio 85 MB (08:26.46) no preemp Total size: 453 MB (44:53.86) = 202040 sectors Lout start: 453 MB (44:55/65) = 202040 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable Disk sub type: Medium Type A, high Beta category (A+) (3) ATIP start of lead in: -11849 (97:24/01) ATIP start of lead out: 359847 (79:59/72) Disk type: Long strategy type (Cyanine, AZO or similar) Manuf. index: 25 Manufacturer: Taiyo Yuden Company Limited Blocks total: 359847 Blocks current: 359847 Blocks remaining: 157807 Starting to write CD/DVD at speed 4 in real TAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Starting new track at sector: 0 Track 01: 1 of 41 MB written (fifo 100%) [buf 59%] 4.4x.cdrecord: faio_wait_on_buffer for writer timed out. cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 02 F4 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 0B 00 00 00 00 13 00 00 00 00 4E 00 00 00 Sense Key: 0xB Aborted Command, Segment 0 Sense Code: 0x4E Qual 0x00 (overlapped commands attempted) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 121.994s timeout 40s write track data: error after 1778112 bytes cdrecord: Input/output error. prevent/allow medium removal: scsi sendcmd: no error CDB: 1E 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 13 00 00 00 00 04 08 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x04 Qual 0x08 (logical unit not ready, long write in progress) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.002s timeout 40s Sense Bytes: 70 00 00 00 00 00 00 13 00 00 00 00 00 00 00 00 00 00 cdrecord: Input/output error. flush cache: scsi sendcmd: cmd timeout after 120.116 (120) s CDB: 35 00 00 00 00 00 00 00 00 00 cmd finished after 120.116s timeout 120s Trouble flushing the cache Writing time: 614.208s Average write speed 4.4x. Fixating... Fixating time: 155.805s cdrecord: fifo had 92 puts and 29 gets. cdrecord: fifo was 0 times empty and 16 times full, min fill was 95%.
____________________________________________________ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com ____________________________________________________