> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > mandrake.com] On Behalf Of Frans Ketelaars > Sent: Thursday, 3 June 2004 6:25 p.m. > To: [EMAIL PROTECTED] > Subject: Re: [newbie] What changed? mdk10 won't detect my soundcard (sb16) > > On Thursday 03 June 2004 02:45, Dexter N Muir wrote: > > Hi Frans > > > > Bash: aumix: command not found > > > > Module sb loads, and it looks like it does so twice... > > System sounds work, so does the CD player - just can't control 'em... > > > > Any further clues? > > You have to install the aumix rpm package. What's the output of > /sbin/lsmod? What's in /etc/modprobe.conf? What do you mean with > "Module sb loads, and it looks like it does so twice..."? > > HTH, > > -Frans > and Greg Meyer wrote: >Try alsamixergui and play around with some of the default options. I >couldn't >control my CMI card until I turned off 4 channel mode and then I could use >the pcm slider to set volume again. > >
Thanks Frans. Installing aumix.rpm solved it. Here's /var/log/messages: Jun 7 11:25:09 localhost syslogd 1.4.1: restart. Jun 7 11:25:09 localhost kernel: klogd 1.4.1, log source = /proc/kmsg started. Jun 7 11:25:09 localhost kernel: Inspecting /boot/System.map-2.6.3-4mdk Jun 7 11:25:10 localhost partmon: Checking if partitions have enough free diskspace: Jun 7 11:25:10 localhost kernel: Loaded 29308 symbols from /boot/System.map-2.6.3-4mdk. Jun 7 11:25:10 localhost kernel: Symbols match kernel version 2.6.3. Jun 7 11:25:10 localhost kernel: No module symbols loaded - kernel modules not enabled. Jun 7 11:25:10 localhost kernel: Linux version 2.6.3-4mdk ([EMAIL PROTECTED]) (gcc version 3.3.2 (Mandrake Linux 10.0 3.3.2-6mdk)) #1 Tue Mar 2 07:26:13 CET 2004 Jun 7 11:25:10 localhost kernel: BIOS-provided physical RAM map: Jun 7 11:25:10 localhost kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Jun 7 11:25:10 localhost kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Jun 7 11:25:10 localhost kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Jun 7 11:25:10 localhost kernel: BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable) Jun 7 11:25:10 localhost kernel: BIOS-e820: 0000000007ff0000 - 0000000007ff8000 (ACPI data) Jun 7 11:25:10 localhost kernel: BIOS-e820: 0000000007ff8000 - 0000000008000000 (ACPI NVS) Jun 7 11:25:10 localhost kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Jun 7 11:25:10 localhost kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jun 7 11:25:10 localhost kernel: BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) Jun 7 11:25:10 localhost kernel: 127MB LOWMEM available. Jun 7 11:25:10 localhost kernel: On node 0 totalpages: 32752 Jun 7 11:25:10 localhost kernel: DMA zone: 4096 pages, LIFO batch:1 Jun 7 11:25:10 localhost kernel: Normal zone: 28656 pages, LIFO batch:6 Jun 7 11:25:10 localhost kernel: HighMem zone: 0 pages, LIFO batch:1 Jun 7 11:25:10 localhost kernel: DMI 2.0 present. Jun 7 11:25:10 localhost kernel: ACPI disabled because your bios is from 95 and too old Jun 7 11:25:10 localhost kernel: You can enable it with acpi=force Jun 7 11:25:10 localhost kernel: Built 1 zonelists Jun 7 11:25:10 localhost kernel: Kernel command line: auto BOOT_IMAGE=linux ro root=341 devfs=mount acpi=ht resume=/dev/hdb5 splash=silent Jun 7 11:25:10 localhost kernel: bootsplash: silent mode. Jun 7 11:25:10 localhost kernel: No local APIC present or hardware disabled Jun 7 11:25:10 localhost kernel: Initializing CPU#0 Jun 7 11:25:10 localhost kernel: PID hash table entries: 512 (order 9: 4096 bytes) Jun 7 11:25:10 localhost kernel: Detected 500.978 MHz processor. Jun 7 11:25:10 localhost kernel: Using tsc for high-res timesource Jun 7 11:25:10 localhost kernel: Console: colour dummy device 80x25 Jun 7 11:25:10 localhost kernel: Memory: 125764k/131008k available (1815k kernel code, 4708k reserved, 846k data, 272k init, 0k highmem) Jun 7 11:25:10 localhost kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok. Jun 7 11:25:10 localhost kernel: Calibrating delay loop... 989.18 BogoMIPS Jun 7 11:25:10 localhost kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Jun 7 11:25:10 localhost kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Jun 7 11:25:10 localhost kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Jun 7 11:25:10 localhost kernel: checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Jun 7 11:25:10 localhost kernel: Freeing initrd memory: 132k freed Jun 7 11:25:10 localhost kernel: Enabling new style K6 write allocation for 127 Mb Jun 7 11:25:10 localhost kernel: CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line) Jun 7 11:25:10 localhost kernel: CPU: AMD-K6(tm) 3D processor stepping 0c Jun 7 11:25:10 localhost kernel: Checking 'hlt' instruction... OK. Jun 7 11:25:10 localhost kernel: POSIX conformance testing by UNIFIX Jun 7 11:25:10 localhost kernel: NET: Registered protocol family 16 Jun 7 11:25:10 localhost kernel: EISA bus registered Jun 7 11:25:10 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfdb41, last bus=1 Jun 7 11:25:10 localhost kernel: PCI: Using configuration type 1 Jun 7 11:25:10 localhost kernel: mtrr: v2.0 (20020519) Jun 7 11:25:10 localhost kernel: ACPI: Subsystem revision 20040211 Jun 7 11:25:10 localhost kernel: ACPI: Interpreter disabled. Jun 7 11:25:10 localhost kernel: Linux Plug and Play Support v0.97 (c) Adam Belay Jun 7 11:25:10 localhost kernel: PnPBIOS: Disabled Jun 7 11:25:10 localhost kernel: PCI: Probing PCI hardware Jun 7 11:25:10 localhost kernel: PCI: Probing PCI hardware (bus 00) Jun 7 11:25:10 localhost kernel: PCI: Using IRQ router ALI [10b9/1533] at 0000:00:07.0 Jun 7 11:25:10 localhost kernel: vesafb: framebuffer at 0xc8000000, mapped to 0xc8800000, size 4096k Jun 7 11:25:10 localhost kernel: vesafb: mode is 800x600x16, linelength=1600, pages=7 Jun 7 11:25:10 localhost kernel: vesafb: protected mode interface info at c000:5b89 Jun 7 11:25:10 localhost kernel: vesafb: scrolling: redraw Jun 7 11:25:10 localhost kernel: vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Jun 7 11:25:10 localhost kernel: fb0: VESA VGA frame buffer device Jun 7 11:25:10 localhost kernel: apm: BIOS not found. Jun 7 11:25:10 localhost kernel: ikconfig 0.7 with /proc/config* Jun 7 11:25:10 localhost kernel: VFS: Disk quotas dquot_6.5.1 Jun 7 11:25:10 localhost kernel: devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED]) Jun 7 11:25:10 localhost kernel: devfs: boot_options: 0x1 Jun 7 11:25:10 localhost kernel: Initializing Cryptographic API Jun 7 11:25:10 localhost kernel: Activating ISA DMA hang workarounds. Jun 7 11:25:10 localhost kernel: isapnp: Scanning for PnP cards... Jun 7 11:25:10 localhost kernel: isapnp: No Plug & Play device found Jun 7 11:25:10 localhost kernel: bootsplash 3.1.3-2003/11/14: looking for picture.... silentjpeg size 14856 bytes, found (800x600, 14808 bytes, v3). Jun 7 11:25:10 localhost kernel: Console: switching to colour frame buffer device 92x32 Jun 7 11:25:10 localhost kernel: pty: 1024 Unix98 ptys configured Jun 7 11:25:10 localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled Jun 7 11:25:10 localhost kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Jun 7 11:25:10 localhost kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Jun 7 11:25:10 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Jun 7 11:25:10 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Jun 7 11:25:10 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Jun 7 11:25:10 localhost kernel: ALI15X3: IDE controller at PCI slot 0000:00:0f.0 Jun 7 11:25:10 localhost kernel: ALI15X3: chipset revision 194 Jun 7 11:25:10 localhost kernel: ALI15X3: not 100%% native mode: will probe irqs later Jun 7 11:25:10 localhost kernel: ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA Jun 7 11:25:10 localhost kernel: ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio Jun 7 11:25:10 localhost kernel: hda: ST32132A, ATA DISK drive Jun 7 11:25:10 localhost kernel: hdb: QUANTUM FIREBALL CR4.3A, ATA DISK drive Jun 7 11:25:10 localhost kernel: Using anticipatory io scheduler Jun 7 11:25:10 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Jun 7 11:25:10 localhost kernel: hdd: AOPEN CD-RW CRW2440, ATAPI CD/DVD-ROM drive Jun 7 11:25:10 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15 Jun 7 11:25:10 localhost kernel: hda: max request size: 128KiB Jun 7 11:25:10 localhost kernel: hda: 4127760 sectors (2113 MB) w/120KiB Cache, CHS=4095/16/63, DMA Jun 7 11:25:10 localhost kernel: /dev/ide/host0/bus0/target0/lun0: p1 Jun 7 11:25:10 localhost kernel: hdb: max request size: 128KiB Jun 7 11:25:10 localhost kernel: hdb: 8418816 sectors (4310 MB) w/418KiB Cache, CHS=14848/9/63, UDMA(33) Jun 7 11:25:10 localhost kernel: /dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 p6 > Jun 7 11:25:10 localhost kernel: Console: switching to colour frame buffer device 92x32 Jun 7 11:25:10 localhost kernel: mice: PS/2 mouse device common for all mice Jun 7 11:25:10 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 Jun 7 11:25:10 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Jun 7 11:25:10 localhost kernel: input: AT Translated Set 2 keyboard on isa0060/serio0 Jun 7 11:25:10 localhost kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 Jun 7 11:25:10 localhost kernel: EISA: Probing bus 0 at eisa0 Jun 7 11:25:10 localhost kernel: NET: Registered protocol family 2 Jun 7 11:25:10 localhost kernel: IP: routing cache hash table of 512 buckets, 4Kbytes Jun 7 11:25:10 localhost kernel: TCP: Hash tables configured (established 8192 bind 16384) Jun 7 11:25:10 localhost kernel: NET: Registered protocol family 1 Jun 7 11:25:10 localhost kernel: BIOS EDD facility v0.12 2004-Jan-26, 2 devices found Jun 7 11:25:10 localhost kernel: Please report your BIOS at http://linux.dell.com/edd/results.html Jun 7 11:25:10 localhost kernel: Resume Machine: resuming from /dev/hdb5 Jun 7 11:25:10 localhost kernel: Resuming from device hdb5 Jun 7 11:25:10 localhost kernel: Resume Machine: This is normal swap space Jun 7 11:25:10 localhost kernel: md: Autodetecting RAID arrays. Jun 7 11:25:10 localhost kernel: md: autorun ... Jun 7 11:25:10 localhost kernel: md: ... autorun DONE. Jun 7 11:25:10 localhost kernel: RAMDISK: Compressed image found at block 0 Jun 7 11:25:10 localhost kernel: VFS: Mounted root (ext2 filesystem). Jun 7 11:25:10 localhost kernel: Mounted devfs on /dev Jun 7 11:25:10 localhost kernel: kjournald starting. Commit interval 5 seconds Jun 7 11:25:10 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode. Jun 7 11:25:10 localhost kernel: Mounted devfs on /dev Jun 7 11:25:10 localhost kernel: Freeing unused kernel memory: 272k freed Jun 7 11:25:10 localhost kernel: Real Time Clock Driver v1.12 Jun 7 11:25:10 localhost kernel: drivers/usb/core/usb.c: registered new driver usbfs Jun 7 11:25:10 localhost kernel: drivers/usb/core/usb.c: registered new driver hub Jun 7 11:25:10 localhost kernel: drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 Jun 7 11:25:10 localhost kernel: PCI: Found IRQ 11 for device 0000:00:08.0 Jun 7 11:25:10 localhost kernel: uhci_hcd 0000:00:08.0: UHCI Host Controller Jun 7 11:25:10 localhost kernel: uhci_hcd 0000:00:08.0: irq 11, io base 0000df40 Jun 7 11:25:10 localhost kernel: uhci_hcd 0000:00:08.0: new USB bus registered, assigned bus number 1 Jun 7 11:25:10 localhost kernel: hub 1-0:1.0: USB hub found Jun 7 11:25:10 localhost kernel: hub 1-0:1.0: 2 ports detected Jun 7 11:25:10 localhost kernel: EXT3 FS on hdb1, internal journal Jun 7 11:25:10 localhost kernel: Adding 457812k swap on /dev/hdb5. Priority:-1 extents:1 Jun 7 11:25:10 localhost kernel: sb: Init: Starting Probe... Jun 7 11:25:10 localhost kernel: sb: Probing legacy card with io=220, irq=7, dma=1, dma16=5 Jun 7 11:25:10 localhost kernel: SB 4.13 detected OK (220) Jun 7 11:25:10 localhost kernel: sb: Turning on MPU Jun 7 11:25:10 localhost kernel: sb: Init: Done Jun 7 11:25:10 localhost kernel: SCSI subsystem initialized Jun 7 11:25:10 localhost kernel: imm: Version 2.05 (for Linux 2.4.0) Jun 7 11:25:10 localhost kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] Jun 7 11:25:10 localhost kernel: parport0: irq 7 detected Jun 7 11:25:10 localhost kernel: ppa: Version 2.07 (for Linux 2.4.x) Jun 7 11:25:10 localhost kernel: kjournald starting. Commit interval 5 seconds Jun 7 11:25:10 localhost kernel: EXT3 FS on hdb6, internal journal Jun 7 11:25:10 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode. Jun 7 11:25:10 localhost kernel: Supermount version 2.0.4 for kernel 2.6 Jun 7 11:25:10 localhost kernel: ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker Jun 7 11:25:10 localhost kernel: http://www.scyld.com/network/ne2k-pci.html Jun 7 11:25:10 localhost kernel: PCI: Found IRQ 10 for device 0000:00:09.0 Jun 7 11:25:10 localhost kernel: eth0: RealTek RTL-8029 found at 0xdf00, IRQ 10, 52:54:05:E4:CB:32. Jun 7 11:25:10 localhost kernel: inserting floppy driver for 2.6.3-4mdk Jun 7 11:25:10 localhost kernel: Floppy drive(s): fd0 is 1.44M Jun 7 11:25:10 localhost kernel: FDC 0 is a post-1991 82077 Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x20LastFailedSense 0x02 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: DMA disabled Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: ATAPI reset complete Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x20LastFailedSense 0x02 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: ATAPI reset complete Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x20LastFailedSense 0x02 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: ATAPI reset complete Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x20LastFailedSense 0x02 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: ATAPI reset complete Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x20LastFailedSense 0x02 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: ATAPI reset complete Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x20LastFailedSense 0x02 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: ATAPI reset complete Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x20LastFailedSense 0x02 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: ATAPI reset complete Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x20LastFailedSense 0x02 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: ATAPI reset complete Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x20LastFailedSense 0x02 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: ATAPI reset complete Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x20LastFailedSense 0x02 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: ATAPI reset complete Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x20LastFailedSense 0x02 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest } Jun 7 11:25:10 localhost kernel: hdd: status error: error=0x00 Jun 7 11:25:10 localhost kernel: hdd: drive not ready for command Jun 7 11:25:10 localhost kernel: hdd: ATAPI reset complete Jun 7 11:25:10 localhost kernel: hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache Jun 7 11:25:10 localhost kernel: Uniform CD-ROM driver Revision: 3.20 Jun 7 11:25:10 localhost kernel: ide-floppy driver 0.99.newide Jun 7 11:25:10 localhost kernel: drivers/usb/core/usb.c: registered new driver hiddev Jun 7 11:25:10 localhost kernel: drivers/usb/core/usb.c: registered new driver hid Jun 7 11:25:10 localhost kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver Jun 7 11:25:10 localhost kernel: NET: Registered protocol family 17 Jun 7 11:25:11 localhost partmon: ^[[65G[^[[1;32m Jun 7 11:25:11 localhost partmon: OK Jun 7 11:25:11 localhost partmon: Jun 7 11:25:11 localhost rc: Starting partmon: succeeded Jun 7 11:25:11 localhost nfslock: rpc.lockd startup succeeded Jun 7 11:25:11 localhost rpc.statd[1490]: Version 1.0.6 Starting Jun 7 11:25:11 localhost rpc.statd[1490]: statd running as root. chown /var/lib/nfs/sm to choose different user Jun 7 11:25:12 localhost nfslock: rpc.statd startup succeeded Jun 7 23:24:27 localhost rc.sysinit: Setting default font (lat0-16): succeeded Jun 7 23:24:27 localhost rc.sysinit: Mounting proc filesystem succeeded Jun 7 23:24:28 localhost rc.sysinit: Mounting sysfs on /sys succeeded Jun 7 23:24:29 localhost devfsd: Started device management daemon v1.3.25 for /dev Jun 7 23:24:31 localhost rc.sysinit: Running DevFs daemon succeeded Jun 7 23:24:31 localhost rc.sysinit: Unmounting initrd: succeeded Jun 7 23:24:32 localhost rc.sysinit: Configuring kernel parameters: succeeded Jun 7 11:24:32 localhost date: Mon Jun 7 11:24:32 NZST 2004 Jun 7 11:24:32 localhost rc.sysinit: Setting clock (localtime): Mon Jun 7 11:24:32 NZST 2004 succeeded Jun 7 11:24:32 localhost rc.sysinit: Loading default keymap succeeded Jun 7 11:24:32 localhost rc.sysinit: Setting hostname localhost: succeeded Jun 7 11:24:33 localhost usb: Initializing USB controller (usb-uhci): succeeded Jun 7 11:24:34 localhost usb: Mount USB filesystem succeeded Jun 7 11:24:35 localhost fsck: /dev/hdb1: clean, 96513/283968 files, 428928/567204 blocks Jun 7 11:24:36 localhost rc.sysinit: Remounting root filesystem in read-write mode: succeeded Jun 7 11:24:36 localhost rc.sysinit: Activating swap partitions: succeeded Jun 7 11:24:37 localhost rc.sysinit: Loading sound module (sb): succeeded Jun 7 11:24:38 localhost : Loading module: scsi_hostadapter Jun 7 11:24:38 localhost fsck: /dev/hdb6: clean, 421/185472 files, 14885/370668 blocks Jun 7 11:24:39 localhost rc.sysinit: Mounting local filesystems: succeeded Jun 7 11:24:39 localhost rc.sysinit: Mounting loopback filesystems: succeeded Jun 7 11:24:39 localhost loadkeys: Loading /usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz Jun 7 11:24:40 localhost keytable: Loading keymap: us succeeded Jun 7 11:24:40 localhost loadkeys: Loading /usr/lib/kbd/keymaps/include/compose.latin9.inc.gz Jun 7 11:24:40 localhost keytable: Loading compose keys: compose.latin9.inc succeeded Jun 7 11:24:40 localhost keytable: succeeded Jun 7 11:24:40 localhost rc.sysinit: Enabling swap space: succeeded Jun 7 11:24:43 localhost mandrake_everytime: Starting netprofile: succeeded Jun 7 11:24:43 localhost init: Entering runlevel: 5 Jun 7 11:24:45 localhost service_harddrake[719]: ### Program is starting ### Jun 7 11:24:48 localhost modprobe: FATAL: Module ide-probe-mod not found. Jun 7 11:24:48 localhost modprobe: FATAL: Module ide-disk not found. Jun 7 11:24:50 localhost service_harddrake[719]: running: /sbin/modprobe hid Jun 7 11:24:50 localhost service_harddrake[719]: running: /sbin/modprobe -n serial Jun 7 11:24:51 localhost service_harddrake[719]: touched file /var/lock/LCK..tts/1 Jun 7 11:24:57 localhost service_harddrake[719]: probed Generic Serial Mouse of class MOUSE on device /dev/ttyS1 Jun 7 11:24:57 localhost service_harddrake[719]: created file /etc/sysconfig/harddrake2/previous_hw Jun 7 11:24:57 localhost harddrake: succeeded Jun 7 11:24:58 localhost network: Setting network parameters: succeeded Jun 7 11:24:59 localhost network: Bringing up loopback interface: succeeded Jun 7 11:24:59 localhost ifplugd(eth0)[888]: ifplugd 0.21b initializing. Jun 7 11:24:59 localhost ifplugd(eth0)[888]: Using interface eth0/52:54:05:E4:CB:32 with driver <ne2k-pci> (version: 1.03) Jun 7 11:24:59 localhost ifplugd(eth0)[888]: Failed to detect plug status of eth0 Jun 7 11:24:59 localhost ifplugd(eth0)[888]: Executing '/etc/ifplugd/ifplugd.action eth0 up'. Jun 7 11:25:03 localhost dhclient: DHCPACK from 192.168.1.2 Jun 7 11:25:03 localhost ifplugd(eth0)[888]: client: Determining IP information for eth0... done. Jun 7 11:25:04 localhost ifplugd(eth0)[888]: Program executed successfully. Jun 7 11:25:04 localhost ifplugd(eth0)[888]: Exiting. Jun 7 11:25:04 localhost network: Bringing up interface eth0: failed Jun 7 11:25:04 localhost net_cnx_up: Shutting down interface eth0: Jun 7 11:25:05 localhost network: Shutting down interface eth0: succeeded Jun 7 11:25:05 localhost net_cnx_up: ^[[65G[^[[1;32m Jun 7 11:25:05 localhost net_cnx_up: OK Jun 7 11:25:05 localhost net_cnx_up: Jun 7 11:25:05 localhost net_cnx_up: Shutting down loopback interface: Jun 7 11:25:05 localhost network: Shutting down loopback interface: succeeded Jun 7 11:25:05 localhost net_cnx_up: ^[[65G Jun 7 11:25:05 localhost net_cnx_up: [^[[1;32m Jun 7 11:25:05 localhost net_cnx_up: OK Jun 7 11:25:05 localhost net_cnx_up: Jun 7 11:25:05 localhost net_cnx_up: Setting network parameters: Jun 7 11:25:06 localhost network: Setting network parameters: succeeded Jun 7 11:25:06 localhost net_cnx_up: ^[[65G Jun 7 11:25:06 localhost net_cnx_up: [^[[1;32m Jun 7 11:25:06 localhost net_cnx_up: OK Jun 7 11:25:06 localhost net_cnx_up: Jun 7 11:25:06 localhost net_cnx_up: Bringing up loopback interface: Jun 7 11:25:06 localhost network: Bringing up loopback interface: succeeded Jun 7 11:25:06 localhost net_cnx_up: ^[[65G Jun 7 11:25:06 localhost net_cnx_up: [^[[1;32m Jun 7 11:25:06 localhost net_cnx_up: OK Jun 7 11:25:06 localhost net_cnx_up: Jun 7 11:25:06 localhost net_cnx_up: Bringing up interface eth0: Jun 7 11:25:06 localhost ifplugd(eth0)[1268]: ifplugd 0.21b initializing. Jun 7 11:25:06 localhost ifplugd(eth0)[1268]: Using interface eth0/52:54:05:E4:CB:32 with driver <ne2k-pci> (version: 1.03) Jun 7 11:25:06 localhost ifplugd(eth0)[1268]: Failed to detect plug status of eth0 Jun 7 11:25:06 localhost ifplugd(eth0)[1268]: Executing '/etc/ifplugd/ifplugd.action eth0 up'. Jun 7 11:25:08 localhost dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67 Jun 7 11:25:08 localhost dhclient: bound to 192.168.1.169 -- renewal in 1060919339 seconds. Jun 7 11:25:08 localhost ifplugd(eth0)[1268]: client: Determining IP information for eth0... done. Jun 7 11:25:08 localhost ifplugd(eth0)[1268]: Program executed successfully. Jun 7 11:25:08 localhost ifplugd(eth0)[1268]: Exiting. Jun 7 11:25:08 localhost network: Bringing up interface eth0: failed Jun 7 11:25:08 localhost net_cnx_up: ^[[65G Jun 7 11:25:08 localhost net_cnx_up: [^[[1;31m Jun 7 11:25:08 localhost net_cnx_up: FAILED Jun 7 11:25:08 localhost net_cnx_up: Jun 7 11:25:08 localhost internet: Checking internet connections to start at boot succeeded Jun 7 11:25:09 localhost portmap: portmap startup succeeded Jun 7 11:25:13 localhost sound: Loading sound module (sb) succeeded Jun 7 11:25:14 localhost aumix: vol set to 100, 100 Jun 7 11:25:14 localhost aumix: bass set to 75, 75 Jun 7 11:25:14 localhost aumix: treble set to 25, 25 Jun 7 11:25:14 localhost aumix: synth set to 75, 75, P Jun 7 11:25:14 localhost aumix: pcm set to 75, 75 Jun 7 11:25:14 localhost aumix: speaker set to 0, 0 Jun 7 11:25:14 localhost aumix: line set to 75, 75, R Jun 7 11:25:14 localhost aumix: mic set to 16, 16, R Jun 7 11:25:14 localhost aumix: cd set to 100, 100, P Jun 7 11:25:14 localhost aumix: mix set to 0, 0 Jun 7 11:25:14 localhost aumix: igain set to 75, 75 Jun 7 11:25:14 localhost aumix: ogain set to 75, 75 Jun 7 11:25:14 localhost sound: Loading mixer settings succeeded Jun 7 11:25:15 localhost random: Initializing random number generator: succeeded Jun 7 11:25:15 localhost xfs: xfs startup succeeded Jun 7 11:25:16 localhost netfs: Mounting other filesystems: succeeded Jun 7 11:25:16 localhost xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/drakfont (unreadable) Jun 7 11:25:16 localhost xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/drakfont/Type1 (unreadable) Jun 7 11:25:16 localhost xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/drakfont/ttf (unreadable) Jun 7 11:25:16 localhost xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/100dpi:unscaled (unreadable) Jun 7 11:25:16 localhost dm: Starting display manager: Jun 7 11:25:16 localhost xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/pcf_drakfont:unscaled (unreadable) Jun 7 11:25:16 localhost dm: Display manager startup succeeded Jun 7 11:25:16 localhost dm: ^[[65G Jun 7 11:25:16 localhost dm: [^[[1;32m Jun 7 11:25:16 localhost dm: OK Jun 7 11:25:16 localhost dm: Jun 7 11:25:16 localhost rc: Starting dm: succeeded Jun 7 11:25:17 localhost atd: atd startup succeeded Jun 7 11:25:19 localhost kernel: NET: Registered protocol family 10 Jun 7 11:25:19 localhost kernel: Disabled Privacy Extensions on device c035fa20(lo) Jun 7 11:25:19 localhost kernel: IPv6 over IPv4 tunneling driver Jun 7 11:25:19 localhost net.agent[1775]: add event not handled Jun 7 11:25:22 localhost kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). Jun 7 11:25:22 localhost kernel: atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. Jun 7 11:25:22 localhost kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). Jun 7 11:25:22 localhost kernel: atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. Jun 7 11:25:30 localhost ntpdate[1767]: step time server 80.33.107.110 offset 6.704622 sec Jun 7 11:25:30 localhost kde3(pam_unix)[1768]: session opened for user dexy by (uid=0) Jun 7 11:25:31 localhost ntpd[1800]: ntpd [EMAIL PROTECTED] Mon Mar 1 13:25:44 CET 2004 (1) Jun 7 11:25:31 localhost ntpd: ntpd startup succeeded Jun 7 11:25:32 localhost ntpd[1800]: precision = 1.000 usec Jun 7 11:25:35 localhost ntpd[1800]: kernel time sync status 0040 Jun 7 11:25:36 localhost sshd: Starting sshd: Jun 7 11:25:36 localhost ntpd[1800]: frequency initialized 11.063 PPM from /etc/ntp/drift Jun 7 11:25:36 localhost ntpd[1800]: configure: keyword "authenticate" unknown, line ignored Jun 7 11:25:37 localhost sshd[1860]: Server listening on :: port 22. Jun 7 11:25:37 localhost sshd[1860]: error: Bind to port 22 on 0.0.0.0 failed: Address already in use. Jun 7 11:25:37 localhost sshd: startup succeeded Jun 7 11:25:37 localhost sshd: ^[[65G Jun 7 11:25:37 localhost sshd: [^[[1;32m Jun 7 11:25:37 localhost sshd: Jun 7 11:25:39 localhost rc: Starting sshd: succeeded Jun 7 11:25:40 localhost tmdns[1905]: enter main loop Jun 7 11:25:40 localhost tmdns: tmdns startup succeeded Jun 7 11:25:41 localhost tmdns[1905]: claim name "Studio.local", type 1 Jun 7 11:25:41 localhost xinetd: xinetd startup succeeded Jun 7 11:25:41 localhost xinetd[1961]: Service ftp: attribute already set: disable [file=/etc/xinetd.d/proftpd-xinetd] [line=16] Jun 7 11:25:42 localhost nfs: Starting NFS services: succeeded Jun 7 11:25:42 localhost xinetd[1961]: xinetd Version 2.3.13 started with libwrap options compiled in. Jun 7 11:25:42 localhost xinetd[1961]: Started working: 1 available service Jun 7 11:25:42 localhost kernel: Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). Jun 7 11:25:42 localhost nfs: rpc.nfsd startup succeeded Jun 7 11:25:43 localhost nfs: rpc.mountd startup succeeded Jun 7 11:25:44 localhost loadkeys: Loading /usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz Jun 7 11:25:44 localhost keytable: Loading keymap: us succeeded Jun 7 11:25:44 localhost loadkeys: Loading /usr/lib/kbd/keymaps/include/compose.latin9.inc.gz Jun 7 11:25:44 localhost keytable: Loading compose keys: compose.latin9.inc succeeded Jun 7 11:25:44 localhost keytable: succeeded Jun 7 11:25:44 localhost numlock: Starting numlock: Jun 7 11:25:44 localhost numlock: ^[[65G[^[[1;32m Jun 7 11:25:44 localhost numlock: OK Jun 7 11:25:44 localhost numlock: Jun 7 11:25:45 localhost rc: Starting numlock: succeeded Jun 7 11:25:45 localhost proftpd[2196]: localhost - ProFTPD 1.2.9 (stable) (built Thu Nov 20 16:14:14 CET 2003) standalone mode STARTUP Jun 7 11:25:46 localhost proftpd: proftpd startup succeeded Jun 7 11:25:46 localhost crond[2224]: (CRON) STARTUP (fork ok) Jun 7 11:25:46 localhost crond: crond startup succeeded Jun 7 11:25:48 localhost smbd[2270]: [2004/06/07 11:25:48, 0] printing/print_cups.c:cups_printer_fn(108) Jun 7 11:25:48 localhost smbd[2270]: Unable to connect to CUPS server localhost - Connection refused Jun 7 11:25:49 localhost smb: smbd startup succeeded Jun 7 11:25:50 localhost smb: nmbd startup succeeded Jun 7 11:25:54 localhost gconfd (dexy-2324): starting (version 2.4.0.1), pid 2324 user 'dexy' Jun 7 11:25:56 localhost gconfd (dexy-2324): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only config source at position 0 Jun 7 11:25:56 localhost gconfd (dexy-2324): Resolved address "xml:readwrite:/home/dexy/.gconf" to a writable config source at position 1 Jun 7 11:25:56 localhost gconfd (dexy-2324): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only config source at position 2 Jun 7 11:26:01 localhost httpd2: httpd2: Could not determine the server's fully qualified domain name, using 127.0.0.1 for ServerName Jun 7 11:26:07 localhost httpd: httpd2 startup succeeded Jun 7 11:26:12 localhost rc: Starting kheader: succeeded Jun 7 11:26:13 localhost devfsd[120]: Caught SIGHUP Jun 7 11:26:13 localhost devfsd[120]: read config file: "/etc/devfs/conf.d//mouse.conf" Jun 7 11:26:13 localhost devfsd[120]: read config file: "/etc/devfs/conf.d//dynamic.conf" Jun 7 11:26:13 localhost devfsd[120]: read config file: "/etc/devfs/conf.d//ttyS1.conf" Jun 7 11:26:13 localhost devfsd[120]: read config file: "/etc/devfsd.conf" Jun 7 11:26:13 localhost devfsd: Running devfsd actions: succeeded Jun 7 11:26:14 localhost kernel: bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600, 11943 bytes, v3). Jun 7 11:26:14 localhost kernel: bootsplash: status on console 0 changed to on Jun 7 11:26:15 localhost kernel: bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600, 11943 bytes, v3). Jun 7 11:26:15 localhost kernel: bootsplash: status on console 1 changed to on Jun 7 11:26:15 localhost kernel: bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600, 11943 bytes, v3). Jun 7 11:26:15 localhost kernel: bootsplash: status on console 2 changed to on Jun 7 11:26:15 localhost kernel: bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600, 11943 bytes, v3). Jun 7 11:26:15 localhost kernel: bootsplash: status on console 3 changed to on Jun 7 11:26:15 localhost kernel: bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600, 11943 bytes, v3). Jun 7 11:26:15 localhost kernel: bootsplash: status on console 4 changed to on Jun 7 11:26:15 localhost kernel: bootsplash 3.1.3-2003/11/14: looking for picture.... found (800x600, 11943 bytes, v3). Jun 7 11:26:15 localhost kernel: bootsplash: status on console 5 changed to on Jun 7 11:26:18 localhost perl: drakupdate_fstab called with --auto --add /dev/ide/host0/bus0/target0/lun0/part1 Jun 7 11:26:23 localhost perl: drakupdate_fstab called with --auto --add /dev/ide/host0/bus0/target1/lun0/part1 Jun 7 11:26:30 localhost perl: drakupdate_fstab called with --auto --add /dev/ide/host0/bus0/target1/lun0/part2 Jun 7 11:26:36 localhost perl: drakupdate_fstab called with --auto --add /dev/ide/host0/bus0/target1/lun0/part5 Jun 7 11:26:39 localhost perl: drakupdate_fstab called with --auto --add /dev/ide/host0/bus0/target1/lun0/part6 Jun 7 11:28:51 localhost ntpd[1800]: synchronized to LOCAL(0), stratum=10 Jun 7 11:28:51 localhost ntpd[1800]: kernel time sync disabled 0041 Jun 7 11:29:54 localhost ntpd[1800]: kernel time sync enabled 0001 Jun 7 11:31:31 localhost nmbd[2299]: [2004/06/07 11:31:31, 0] nmbd/nmbd_become_lmb.c:become_local_master_stage2(396) Jun 7 11:31:31 localhost nmbd[2299]: ***** Jun 7 11:31:31 localhost nmbd[2299]: Jun 7 11:31:31 localhost nmbd[2299]: Samba name server LOCALHOST is now a local master browser for workgroup MDKGROUP on subnet 192.168.1.169 Jun 7 11:31:31 localhost nmbd[2299]: Jun 7 11:31:31 localhost nmbd[2299]: ***** Jun 7 11:33:27 localhost gconfd (root-2707): starting (version 2.4.0.1), pid 2707 user 'root' Jun 7 11:33:27 localhost gconfd (root-2707): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only config source at position 0 Jun 7 11:33:27 localhost gconfd (root-2707): Resolved address "xml:readwrite:/root/.gconf" to a writable config source at position 1 Jun 7 11:33:27 localhost gconfd (root-2707): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only config source at position 2 Jun 7 11:42:48 localhost ntpd[1800]: synchronized to 80.33.107.110, stratum=3 Jun 7 11:43:27 localhost gconfd (root-2707): GConf server is not in use, shutting down. Jun 7 11:43:27 localhost gconfd (root-2707): Exiting Jun 7 12:01:00 localhost CROND[2712]: (root) CMD (nice -n 19 run-parts /etc/cron.hourly) Jun 7 12:01:04 localhost msec: changed mode of /var/log/wtmp from 664 to 640 Jun 7 12:01:04 localhost msec: changed group of /var/log/wtmp from utmp to adm Jun 7 12:01:04 localhost msec: changed mode of /var/log/XFree86.0.log from 644 to 640 Jun 7 12:01:04 localhost msec: changed group of /var/log/XFree86.0.log from root to adm Jun 7 12:01:04 localhost msec: changed mode of /var/log/ksyms.0 from 644 to 640 Jun 7 12:01:04 localhost msec: changed group of /var/log/ksyms.0 from root to adm Jun 7 12:34:00 localhost gconfd (root-2738): starting (version 2.4.0.1), pid 2738 user 'root' Jun 7 12:34:00 localhost gconfd (root-2738): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only config source at position 0 Jun 7 12:34:00 localhost gconfd (root-2738): Resolved address "xml:readwrite:/root/.gconf" to a writable config source at position 1 Jun 7 12:34:00 localhost gconfd (root-2738): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only config source at position 2 Jun 7 12:35:29 localhost su(pam_unix)[2773]: session opened for user root by (uid=501) Lines 140-144 show sb Init - this gives a line on the screen at boot Loading sound module (sb) [OK] Just after activating swap. Line 409 gives another, between loading NFS statd and loading the mixer settings. Line 57 shows pnp bios disabled - the Setup menu (Del at boot) has pnp-aware OS set to "yes". I had though this might have affected the detection of the card, but it seems to have no effect. The card is supposed to be pnp. Greg: Thanks, but alsa is not used here. Summary: Thanks all, I now have a functional sound system (though not the prettiest :-) Cheers Dex --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.699 / Virus Database: 456 - Release Date: 4/06/2004
____________________________________________________ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com ____________________________________________________
