Do you have pnp os turned on in the Bios?
----- Original Message -----
From: Tom E. Poturica <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, November 13, 1999 8:54 AM
Subject: RE: [newbie] Dual NIC recognition
> I know it can be done, I had it working a while ago with a different 3com
> NIC(3c509) I have a newer 'better' card now and Mandrake does not seem to
> want to allow it to work. What I am looking for is if anyone out there
has
> gotten a 3c900b-TPO to work under Mandrake 6.1..... and how.
>
> Both cards are PCI and both are on IRQ9 in the windoze environment.
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Mark Ramsey
> Sent: Friday, November 12, 1999 9:46 PM
> To: [EMAIL PROTECTED]
> Subject: Re: [newbie] Dual NIC recognition
>
>
> I have a Dlink hooked to the cable modem and a Kingston hooked to a hub
for
> my home lan....works great.
> ----- Original Message -----
> From: Kenny Barrett <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Friday, November 12, 1999 4:25 PM
> Subject: RE: [newbie] Dual NIC recognition
>
>
> > I had a similar setup. I used the 3com to my cable modem. And the other
> > card to other pcs. I could also only get one working.
> >
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]] On Behalf Of Tom E. Poturica
> > Sent: Friday, November 12, 1999 7:12 PM
> > To: [EMAIL PROTECTED]
> > Subject: [newbie] Dual NIC recognition
> >
> > I have 2 NICs in my machine with cable modem going through one(D-Link).
> The
> > other is a 3COM 3C900B-TPO and I can't seem to get it to configure
another
> > interface. First of all the Mandrake web page says it supports it but
> there
> > is no driver available in my 6.1 distribution. Hoiw do I get this card
to
> > be recognised?
> >
> > Tom E. Poturica
> > Rochester, MN
> > [EMAIL PROTECTED]
> >
> >
>
>
