---------- Weitergeleitete Nachricht ---------- Subject: MIDI is not working Date: Wed, 23 Feb 2000 19:12:23 +0000 From: Joerg Reinhardt <[EMAIL PROTECTED]> -- ------------------------------------------------------------------------------- Joerg Reinhardt ------------------------------- [EMAIL PROTECTED] ------------------------------------------------------------------------------- Hi there, I have a problem with my Media-Vision-Jazz16-Soundboard. Yes, I allready tryed soundconfig and it played the Testsample as well, as the Testmidi ,to get it there, I had it several times out of the maschine and plugged into other slots, then change all IRQ's and DMA's. About the third lot that I tryed, I got it working(I,m wondering about that, cause the manual says ,all adresses, IRQ's and DMA's should be OK for the Board and you can change them via software (not the adress, of course)). I was quit lucky when soundconfig worked like it should. My audio-CD's and MP3's are running fine, all video formats (like avi) wich have sound, are "sounding" well. But here's the problem: no MIDI! Non Systemnoises (I suppose now... there should be some, I'm new in Linux and didn't wonder about it made not a beep at all, at first place. Now it occured to me that something is wrong). The whole problem showed to me the time I downloader a sequenzer-program. I was not shure, weather I did the installation wrong, or my system is,so I got a bunch of other MIDI-supporting programs, most of them are working pleny, but with no noise at all. As far as I remember (from my long ago attempts of learning the keyboard playing), MIDI and SAMPLES don't have to do anything with each other, while samples are only "converted" by the soundcard, the MIDI-sound is made by the soundboard itself, only commanded by the MIDI Files. So far, so good.... WHY ISN'T IT WORKING ??? And WHY is soundconfig ABLE to use the midi chip on my board, but no other program? TIMidity++ and timidiplay ARE INSTALLED!