it looks like your cd-rw has been been ids-scsi'd
try changing
/dev/cdrom2
to
/dev/sc0
of have a look in hardware setup in darkconfig in x to find the correct scsi
device.
(mine is listed as cdrom's unknown scsi).
> -----Original Message-----
> From: Todd Wells [mailto:[EMAIL PROTECTED]]
> Sent: 04 April 2000 05:34
> To: [EMAIL PROTECTED]
> Subject: [newbie] can't get 2nd cd to mount - more info
>
>
> Here's some more info I discovered looking at dmesg:
>
> ide_setup: hdc=ide-scsi is this right?
>
> hdb: ASUS CD-S400/A, ATAPI CDROM drive
> hdc: CREATIVE CD-RW RW4224E, ATAPI CDROM drive
> hdc: IRQ probe failed (0)
> hdd: IRQ probe failed (0)
> hdd: IRQ probe failed (0)
>
> hdc: driver not present
> hdc: driver not present
> 3c59x.c:v0.99H 11/17/98 Donald Becker
> http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
> eth0: 3Com 3c905B Cyclone 100baseTx at 0xe400,
> 00:50:da:7c:15:82, IRQ 3
>
> 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate
> interface.
> MII transceiver found at address 24, status 786d.
> MII transceiver found at address 0, status 786d.
> Enabling bus-master transmits and whole-frame receives.
> hdc: driver not present
> hdc: driver not present
> hdc: driver not present
> hdc: driver not present
> hdc: driver not present
> hdc: driver not present
> hdc: driver not present
> hdc: driver not present
> VFS: Disk change detected on device ide0(3,64)
>
>
